After a power-outage my TP-Link AX55 has a totally corrupted NAND --- U-Boot is unresponsive and "dead" need to recovery reflash the complete chip - happy with an OpenWRT NAND dump / or stock dump to get it back to life. If you have a dump or is in possession of a AX55 --- please let me have a copy of the chip dump --- can be dumped via U-Boot (telnet) or serial/UART/JTAG in less than 5min --- (and since AX55 apparently are susceptible to corruption - I do recommend keeping copy anyway! ) Many thanks in advance for your help!
it's not supported by OpenWRT, it's not very likely you'll find someone who'd be able to help you, here.
fingers X:ed though.
Not sure I understand "Not supported here =???" - Any better suggestions?? Tried TP-Link "support" to no awail /Thanks
this forum is about OpenWRT, your router doesn't run OpenWRT (but a vendor SDK), very few people will be able to provide you with the dump, since they don't run OpenWRT.
with OpenWRT, it would have been fairly easy.
Fair enough - happy with an OpenWRT NAND dump
fair enough, except you can't get one, since it's not supported.
this tiny detail was in the 1st reply you got.