TP-Link archer c7 v2

Installing and Using OpenWrt
1

Je n'arrive pas à me connecter à mon routeur tp-link archer c7 v2 après avoir installé openwrt !
L'adresse 192.168.1.1 ne fonctionne pas !
J'arrive à me connecter via putty, login root mais je ne vois pas quoi faire ensuite?

J'ai ça;

BusyBox v1.31.1 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r14834-e48aac89a2
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:~#

Merci de m'aider je ne suis pas un pro rn info !!!

2

When writing in your native language, please always provide an english translation.
This way other users all around the world can take part in the discussion and possibly benefit from the outcome, without having to use a translator.

Apart from that:

You have installed a snapshot image. Read the link for instructions how to install Luci, which is not installed by default in snapshots.

1 Like
3

Note: regarding Development Snapshot builds,

OpenWrt: ... These contain the latest technology, but may not work well, or at all.

Multiple reports of LuCi not installing and/or working, at least without implementing a workaround.

If unsure,
Use the Stable Release builds since they include GUI for your C7.

4

Merci pour votre réponse !

Mais j'ai un problème pour installer LuCi !

opkg_conf_parse_file: Duplicate src declaration (openwrt_kmods https://downloads.openwrt.org/snapshots/targets/ath79/generic/kmods/5.4.73-1-ed3c19e4844380206763e5d3dbc00d4c). Skipping

5

Bonjour,
Ils vous ont demandé de passer par un traducteur pour leur envoyer le texte en anglais.
Openwrt est une communauté très active et toujours prompte à aider les autres, la langue à utiliser est l'anglais. Si ils ne comprennent pas, ils ne pourront pas aider...
Passer par : https://translate.google.com/ choisir la langue source, la langue destination, taper son texte puis traduire, et enfin copier (ctrl+C ou cmd+C) le texte traduit, et le coller ici (ctlc+v ou cmd+v)
Bonne chance

PS: i just explained him, why it would be better for him to use google translate...

1 Like
6

Thank you for your reply !
But I have a problem installing LuCi!

Collected errors:
 * opkg_conf_parse_file: Duplicate src declaration (openwrt_kmods https://downloads.openwrt.org/snapshots/targets/ath79/generic/kmods/5.4.73-1-ed3c19e4844380206763e5d3dbc00d4c). Skipping
7

See * opkg_conf_parse_files: Duplicate src declaration for more information on this issue.

8

How remove or delete the duplicate openwrt_kmods feed from the opkg configs /etc/opkg/*.conf. ?

9

Impossible to open openwrt interface via web page "192.168.2.1" (i change ip adress 192.168.1.1 because it's the same than my box)

  • Luci install ok
  • Luci-ssl install ok
    I don't know what can i do ?
    Thank You
10

And you have ssh access on 192.168.2.1?

Why don't you just flash your router with the latest release?

Note that after doing so, the router's LAN IP will be 192.168.1.1, so you may need to disconnect it from the parent router so that you can access it and change the IP.

11
  • Copy it to your router's directory./tmp
    I don't know how do this, can you help me ?
12

Presuming you are on Windows, you can use WinSCP.