The OpenWrt Firmware Selector

The firmware selector template for uci-defaults missing something on "Configure WLAN" part. If you configure and enable WLAN. Initially after first boot the WLAN will up and running, but when reboot, it will not go up.

So here is the problem:

# Configure WLAN
# More options: https://openwrt.org/docs/guide-user/network/wifi/basic#wi-fi_interfaces
if [ -n "$wlan_name" -a -n "$wlan_password" -a ${#wlan_password} -ge 8 ]; then
  uci set wireless.@wifi-device[0].disabled='0'
  uci set wireless.@wifi-iface[0].encryption='psk2'
  uci set wireless.@wifi-iface[0].ssid="$wlan_name"
  uci set wireless.@wifi-iface[0].key="$wlan_password"
  uci commit wireless
fi

Here is the fix:

# Configure WLAN
# More options: https://openwrt.org/docs/guide-user/network/wifi/basic#wi-fi_interfaces
if [ -n "$wlan_name" -a -n "$wlan_password" -a ${#wlan_password} -ge 8 ]; then
  uci set wireless.@wifi-device[0].disabled='0'
  uci set wireless.@wifi-iface[0].disabled='0'
  uci set wireless.@wifi-iface[0].encryption='psk2'
  uci set wireless.@wifi-iface[0].ssid="$wlan_name"
  uci set wireless.@wifi-iface[0].key="$wlan_password"
  uci commit wireless
fi

As you can see, the template missing this part of uci command:
uci set wireless.@wifi-iface[0].disabled='0'

You may see the actual reference here for configure WLAN:

Hope this will be fix in the firmware selector page.
Thanks.