Hi,
My device is Mikrotik rb750gr3
I created a bridge with the following configurations:
wan connected to ISP Router
ISP Router IP 192.168.70.1/24
wan and lan5 bridged together and bridge IP is 70.2
host pc IP on lan5 : 70.3
host: ping 8.8.8.8
64 bytes from 8.8.8.8: icmp_seq=2690 ttl=117 time=30.1 ms
64 bytes from 8.8.8.8: icmp_seq=2691 ttl=117 time=30.2 ms
64 bytes from 8.8.8.8: icmp_seq=2692 ttl=117 time=30.2 ms
with this configuration when i listen br-lan interface like shown below:
tcpdump -i br-lan host 192.168.70.3
> there is no traffic
tcpdump -i lan5 host 192.168.70.3
> there is no traffic
Why my host's traffic not enters br-lan and lan5 interfaces?
Are there any body to explain this stuation?
Thanks for help..
I plugged ISP router's cable to WAN port
i am trying to make transparent bridge
so when i bridge wan and lan5 port together
and set up wireguard, I want ISP router to act as a default router for my lan hosts
but redirect only specific routes to wireguard for example 192.168.100.0/24 is on wireguard
When my lan hosts attempt to reach 100.0/24 transparent bridge must forward this to wireguard.
But i don't know how to do this.