Support request for 5GHz Radio Testing with ath10k

Dear All,

Previously we used QCA9582 based mPCI module with QCA9558 SOC based Router. in which we used the tx99 firmware for 5GHz radio Testing for RF certification.

Due to the unavailability of the existing mPCI module, we replace it with QCA9882 based mPCI(R11e-5HacD) in which we used the ath10k driver. Now we need support as tx99 firmware in which we can continuous transmission with a different frequency as well as different power.

We need support/Guidance from you for how we can perform the radio Testing with ath10k.

Hope to hear from you at the earliest.

Thanks & Best Regards,
Nikunj Patel