Hello!
Mikrotik RB952Ui-5ac2nD (hAP ac lite).
The rb-nor-flash-16M-ac-initramfs-kernel.bin download from TFTP is normal.
The luci web interface is only available on the wan (1) port, port 5 is red.
When I try to update from rb-nor-flash-16M-ac-squashfs-sysupgrade.bin from luci, I get the error “The downloaded image file does not contain a supported format. Make sure you choose a common image format for your platform. "
Also tried using ssh, the image is not recognized.
Device unknown not supported by this image
Supported devices: rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-931-2nd rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd rb-wapg-5hact2hnd
The boot image does not determine the fee, so I had to register it forcibly.
root@OpenWrt:~# cat /tmp/sysinfo/board_name unknown
If you force a card, it is flashed normally, but there is no switch configuration and port LEDs. WLAN 5g (QCA9887) does not work, USB does not have a power port, port 5 is lit red (gpio14) it turns off if the gpio value is 0
root@OpenWrt:~# echo "rb-952ui-5ac2nd" > /tmp/sysinfo/board_name
root@OpenWrt:~# cat /tmp/sysinfo/board_name rb-952ui-5ac2nd
I would like full support for this model, I need help!
More detailed studies I left here