Hi,
I was following on qualcommax/ipq60xx developments which are likely coming after 23.05.
The board I am experimenting with is dr6018-v4 from wallys which is AP-CP01-V4 reference design. Provided firmware is likely based on pre-openwrt 19 with kernel 4.4 and I was looking to get something more up to date.
QSDK proves dragging behind and hard to work with where older releases fail to compile and carry known vulnerabilities while never ones ask for binaries which are not widely available.
There is a pending pull: [qualcommax: ipq6018: qualcommax: ipq6018: Add Wally's Tech DR6018-v4 by okoklets · Pull Request #15977 · openwrt/openwrt
But that is bare minimum and frankly waste of time. I merged openwrt-ipq with it to have NSS + dr6018 but due minimal dts critical buses/peripherals are not initated.
I came across another git: Telecominfraproject/wlan-ap
This one is promising, it runs on 23.05 includes NSS and dts which works. Kernel is bumped to 5.15.
In free time I plan to play with how did they get it working but obviously people on this project have access to prop. stuff.
Regards,
M.