Support for TP-Link Omada ER605 v1

[hecatae]

https://static.tp-link.com/resources/gpl/er605_gpl.tar.gz

Looking for info and possibility of (future) support of TP-Link Omada er605 Router

[board] [serial port] As requested i have uploaded pictures of the board and the header. The location R2 need to be shorted as does R5 to enable RX and TX. The closest router supported by openwrt looks to be the tplink Archer A6, same cpu , flash size and also has gig ports. I tried to flash the image but got refused both via the web and u-boot any ideas of the next step to enable openwrt on the board. any recommendations

Looking for info and possibility of (future) support of TP-Link Omada er605 Router

@mk24 I've attached a boot log, but i would still like to know how to do a bootm. [ 0.000000] [ 0.000000] The CPU feqenuce set to 880 MHz [ 0.000000] GCMP present [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] Software DMA cache coherency [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] @@----debug cmdline=[ board=OSGv1 console=ttyS1,115200 root=31:04 init=/sbin/init mtdparts=raspi:256k(u-boot)ro,1…

GPL source, how to connect serial and Openwrt 12.09 SDK bootlog links