Just wondering if it would be possible to get OpenWRT on this modem.
Hardware Overview:
BCM63168 Dual Core MIPS 400mhz & 2.4ghz WiFi
Memory: Nanya NT5CC128M16IP 2Gbit DDR3
NAND Flash: Micron 29F2G16ABAEA 2Gbit
DECT: DSP Group DCX81 SoC
5ghz WiFi: BCM43602
VoIP: Silicon Labs Si32919 chip
Ideally I would like to see VoIP and WiFi working as I know that xDSL is proprietary and unsupported.
FIS:
root@mygateway:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00020000 "bcmfs"
mtd1: 000a0000 00020000 "bcmfs_update"
mtd2: 0fa40000 00020000 "ubi"
mtd3: 00400000 00020000 "data"
mtd4: 00020000 00020000 "nvram"
mtd5: 00044000 0001f000 "secondaryboot"
mtd6: 00086320 0001f000 "uboot"
mtd7: 000019e8 0001f000 "permanent_param"
mtd8: 01956800 0001f000 "operational"
mtd9: 0001f000 0001f000 "firm_header"
mtd10: 002b1800 0001f000 "kernel"
mtd11: 016a5000 0001f000 "rootfs"
mtd12: 01956800 0001f000 "rescue"
mtd13: 00ba0000 0001f000 "filesystem1"
mtd14: 00000000 0001f000 "gui"
mtd15: 00000000 00000000 "gui_header"
mtd16: 00000000 00000000 "guifs"
My hacking thread: https://forums.whirlpool.net.au/forum-replies.cfm?t=2746904&p=2
I'm porting OpenWRT to a similar device F@st 3864OP, checkout:
No developer here. But looking to adventure to flash 5355tn as just repeater/extender. Can this F@st 3864OP repo use?