Hey Heinz
I tried the built 3 version openwrt-ramips-mt76x8-c50-v3-squashfs-tftp-recovery.bin using TFTP.
There are no lights( all lights are off) on the router and the router is not responding.
Thank you again!
I do not have more ideas.
You need to connect USB-UART interface to router mainboard and show bootlog.
Thanks Heinz. I am technically not that sound to work to router PCB's.
Is there any other way I may help(show boot log) .
Hey there Heinz,
thanks a lot for your work so far.
I am operating an Archer c50 v3.0 as well and tried to get your openwrt builds running.
So far, no luck. Had to recover to factory after every try with the factory image you provided. Using the recovery and the newest build, all LEDs remaing black. The older ones make the wifi led light after reboot. Using sysupgrade gets me into boot loop.
Cheers,
Johannes
Hope someone is still working on this... I desperately need it to unlock some features.
I guess this post is dead. Is it even possible to make a custom firmware for this device?
Hey @robimarko the versions posted by @Heinz are not working correctly.. any chance you can give it a shot. Thanks..
Sure,but I ask for a bootlog.
Got some images ready for testing but I need bootlog to verify if they match.
1 Like
Hey @robimarko,
i have a Archer C50 v3 and want to install your image. As i see in this thread, there are problems and you need bootlogs for your next steps.
My propose:
- i order a USB-UART. Do you recommend a specific model / with which did you have good experiences? (if not, i buy the first in amazonlist: https://www.amazon.de/USB-TTL-Konverter-Modul-mit-eingebautem-CP2102/dp/B00AFRXKFU/ref=sr_1_3?ie=UTF8&qid=1516389932&sr=8-3&keywords=usb+uart, should be delivered monday or tuesday if i order today)
- i flash one of your images (which one?)
- i wait for failure (no leds or something)
- i try to get bootlogs from the c50v3. i never worked before with usb-uart, but i want to learn it to bring it online with your image. If you can recommend man-pages, or other informations to work with usb-uart or other things that will i need to deliver informations to you -> let me know
Should we do this?
Sorry for my bad translation...
Hi @schuastr,
USB-TTL converter on CP2102 is OK. I use converter on CP2102, CH340 or CH341a (selected to UART).
Connect converter (tx - rx, rx -tx, gnd-gnd, do not connect 3V3 line) to router board and open terminal. If You see bootlog from factory firmware copy all and paste it here.
Now You can flash last firmware from my previous post. ( use tftp-recovery image in recovery mode)
After recovery is ended put bootlog here
I bought this adapter, estimated delivery: 23.01 - 24.01.
i will reply soon with bootlog
Hello!
thank you very much!! I just bought this router and was able to get the logs. I didnt install your images yet but i will try. Maybe the next days. I'll take a look how to build lede too. I didnt step into building lede-images yet. I already build some firmwares but no openwrt/lede things. I'll see. Thanks again! I hope the logs may help a bit. Btw: How to post txt-files and logs?
Linux version 2.6.36 (soho@soho) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #3 Tue Aug 22 17:58:48 HKT 2017
The CPU feqenuce set to 575 MHz
MIPS CPU sleep mode enabled.
CPU revision is: 00019655 (MIPS 24Kc)
Software DMA cache coherency
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttyS1,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0000efed
Readback ErrCtl register=0000efed
Memory: 61064k/65536k available (2723k kernel code, 4472k reserved, 675k data, 168k init, 0k highmem)
NR_IRQS:128
console [ttyS1] enabled
Calibrating delay loop... 386.04 BogoMIPS (lpj=772096)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
RALINK_GPIOMODE = 54154404
RALINK_GPIOMODE = 54144404
***** Xtal 40MHz *****
start PCIe register access
RALINK_RSTCTRL = 2400000
RALINK_CLKCFG1 = fdbfffc0
*************** MT7628 PCIe RC mode *************
PCIE0 enabled
Port 0 N_FTS = 1b105000
init_rt2880pci done
bio: create slab <bio-0> at 0
vgaarb: loaded
pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff 64bit] (PCI address [0x20000000-0x200fffff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0: bridge window [io disabled]
pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 20200000
res[1]->end = 2020ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20000000
res[0]->end = 200fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource Ralink Systick timer
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.15)
msgmni has been set to 119
io scheduler noop registered
io scheduler deadline registered (default)
Ralink gpio driver initialized
i2cdrv_major = 218
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x10000d00 (irq = 21) is a 16550A
serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
brd: module loaded
flash manufacture id: c8, device id 40 17
GD25Q64B(c8 40170000) (8192 Kbytes)
mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
Creating 7 MTD partitions on "raspi":
0x000000000000-0x000000020000 : "boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000007c0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
0x0000007c0000-0x0000007d0000 : "config"
0x0000007d0000-0x0000007e0000 : "romfile"
0x0000007e0000-0x0000007f0000 : "rom"
0x0000007f0000-0x000000800000 : "radio"
Register flash device:flash0
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 168k freed
starting pid 688, tty '': '/etc/init.d/rcS'
rdm_major = 253
spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
Read MAC from flash( 7df100) ffffffb0-4e-26-45-47-ffffffbc
GMAC1_MAC_ADRH -- : 0x0000b04e
GMAC1_MAC_ADRL -- : 0x264547bc
Ralink APSoC Ethernet Driver Initilization. v3.1 256 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, Tx Ring = 256, Rx Ring = 256
spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
Read MAC from flash( 7df100) ffffffb0-4e-26-45-47-ffffffbc
GMAC1_MAC_ADRH -- : 0x0000b04e
GMAC1_MAC_ADRL -- : 0x264547bc
PROC INIT OK!
add domain:tplinkwifi.net
add domain:tplinklogin.net
tp_domain init ok
/etc/init.d/rcS: line 59: telnetd: not found
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
Set: phy[0].reg[0] = 3900
Set: phy[1].reg[0] = 3900
Set: phy[2].reg[0] = 3900
Set: phy[3].reg[0] = 3900
Set: phy[4].reg[0] = 3900
Set: phy[0].reg[0] = 3300
Set: phy[1].reg[0] = 3300
Set: phy[2].reg[0] = 3300
Set: phy[3].reg[0] = 3300
Set: phy[4].reg[0] = 3300
resetMiiPortV over.
starting pid 735, tty '/dev/ttyS1': '/bin/sh'
~ # [ util_execSystem ] 139: ipt_init cmd is "/var/tmp/dconf/rc.router"
[ dm_readFile ] 2061: can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml
spiflash_ioctl_read, Read from 0x007c0000 length 0x10000, ret 0, retlen 0x10000
spiflash_ioctl_read, Read from 0x007c0000 length 0x957d, ret 0, retlen 0x957d
===>Enter Routerspiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
mode
spiflash_ioctl_read, Read from 0x007df200 length 0x4, ret 0, retlen 0x4
spiflash_ioctl_read, Read from 0x007df300 length 0x4, ret 0, retlen 0x4
spiflash_ioctl_read, Read from 0x007df400 length 0x10, ret 0, retlen 0x10
spiflash_ioctl_read, Read from 0x007df500 length 0x29, ret 0, retlen 0x29
spiflash_ioctl_read, Read from 0x007df600 length 0x21, ret 0, retlen 0x21
spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10
spiflash_ioctl_read, Read from 0x007df700 length 0x10, ret 0, retlen 0x10
spiflash_ioctl_read, Read from 0x00020000 length 0x1d0, ret 0, retlen 0x1d0
spiflash_ioctl_read, Read from 0x007df100 length 0x6, ret 0, retlen 0x6
sendto: No such file or directory
pid 734 send 2001 error
[ util_execSystem ] 139: oal_startDynDns cmd is "dyndns /var/tmp/dconf/dyndns.conf"
[ oal_sys_getOldTZInfo ] 519: Open TZ file error!
[ util_execSystem ] 139: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ"
[ util_execSystem ] 139: oal_startNoipDns cmd is "noipdns /var/tmp/dconf/noipdns.conf"
[ util_execSystem ] 139: oal_startCmxDns cmd is "cmxdns /var/tmp/dconf/cmxdns.conf"
ioctl: No such device
[ util_execSystem ] 139: oal_br_addBridge cmd is "brctl addbr br0;brctl setfd br0 0;brctl stp br0 off"
[ util_execSystem ] 139: oal_ipt_addLanRules cmd is "iptables -t filter -A INPUT -i br+ -j ACCEPT
"
[ util_execSystem ] 139: oal_intf_setIntf cmd is "ifconfig br0 192.168.0.1 netmask 255.255.255.0 up"
[ util_execSystem ] 139: oal_util_setProcLanAddr cmd is "echo "br0 16820416," > /proc/net/conRaeth v3.1 (ntract_LocalAddrNAPI
"
[ util_exec,SkbRecycleSystem ] 139: o)
al_intf_enableIn
phy_tx_ring = 0x030be000, tx_ring = 0xa30be000
tf cmd is "ifcon
phy_rx_ring0 = 0x030bf000, rx_ring0 = 0xa30bf000
fig eth0 up"
[fe_sw_init:5185]rt305x_esw_init.
disable switch phyport...
GMAC1_MAC_ADRH -- : 0x0000b04e
GMAC1_MAC_ADRL -- : 0x264547bc
RT305x_ESW: Link Status Changed
[ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 1 : [3]
[ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 2 : [4]
[ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 3 : [5]
[ rsl_getUnusedVlan ] 1042: GET UNUSED VLAN TAG 4 : [6]
[ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 3"
[ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.3 up"
set if eth0.3 to *not wan dev
[ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 4"
[ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.4 up"
set if eth0.4 to *not wan dev
[ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 5"
[ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.5 up"
set if eth0.5 to *not wan dev
[ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 6"
[ util_execSystem ] 139: oal_intf_enableIntf cmd isdevice eth0.3 entered promiscuous mode
"ifconfig eth0.device eth0 entered promiscuous mode
6 up"
set if br0: port 1(eth0.3) entering forwarding state
eth0.6 to *not wbr0: port 1(eth0.3) entering forwarding state
an dev
[ util_execSystem ] 139: oal_addVlanTagIntf cmd is "vconfig add eth0 2"device eth0.4 entered promiscuous mode
[ util_execSbr0: port 2(eth0.4) entering forwarding state
ystem ] 139: oabr0: port 2(eth0.4) entering forwarding state
l_intf_enableIntf cmd is "ifconfig eth0.2 up"
set if eth0.2 to wan dev
[ vladevice eth0.5 entered promiscuous mode
n_addLanPortsIntbr0: port 3(eth0.5) entering forwarding state
oBridge ] 574: br0: port 3(eth0.5) entering forwarding state
add lan Port 255 from br0
[ util_execSystem ] 139: oal_br_addIntfIntoBridge cmdevice eth0.6 entered promiscuous mode
d is "brctl addibr0: port 4(eth0.6) entering forwarding state
f br0 eth0.3"
br0: port 4(eth0.6) entering forwarding state
[ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctl addif br0 eth0.4"
[ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctl addif br0 eth0.5"
[ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctl addif br0 eth0.6"
[ util_execSystem ] 139: rsl_initIPv6CfgObj cmd is "echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6"
[ util_execSystem ] 139: oal_eth_setIGMPSnoopParam cmd is "for i in /sys/devices/virtual/net/*/bridge/multicast_snooping;do echo 1 > $i ; done"
[ util_execSystem ] 139: oal_wlan_ra_setCountryRegion cmd is "cp /etc/SingleSKU_CE.dat /var/Wireless/RT2860AP/SingleSKU.dat"
[ util_execSystem ] 139: oal_wlan_ra_setCountryRegion cmd is "iwpriv ra0 set CountryRegion=1"
ra0 no private ioctls.
[ util_execSystem ] 166: execute ok, exit status = 255
[ util_execSystem ] 139: oal_wlan_ra_updateSkuByIsoName cmd is "if [ -e /etc/SingleSKU_DE.dat ]; then cp /etc/SingleSKU_DE.dat /var/Wireless/RT2860AP/SingleSKU.dat; fi"
[ util_execSystem ] 139: oal_wlan_ra_loadDriver cmd is "insmod /lib/modules/kmdir/kernel/drivers/net/wireless/mt_wifi_ap/mt_wifi.ko"
ADDRCONF(NETDEV_CHANGE): eth0.4: link becomes ready
ADDRCONF(NETDEV_CHANGE): eth0.5: link becomes ready
ADDRCONF(NETDEV_CHANGE): eth0.6: link becomes ready
ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
=== pAd = c0840000, size = 1482744 ===
<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
<-- RTMPAllocAdapterBlock, Status=0
RtmpChipOpsHook(492): Not support for HIF_MT yet!
mt7628_init()-->
mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
e2.bin mt7628_init(1156)::(2), pChipCap->fw_len(64560)
mt_bcn_buf_init(218): Not support for HIF_MT yet!
<--mt7628_init()
[ util_execSystem ] 139: oal_wlan_ra_initWlan cmd is "ifconfig ra0 up"
TX_BCN DESC a3299000 size = 320
RX[0] DESC a329b000 size = 2048
RX[1] DESC a329e000 size = 2048
RT_CfgSetApcliMacAddress : invalid mac setting
cfg_mode=9
cfg_mode=9
wmode_band_equal(): Band Equal!
AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
default ApCliAPSDCapable[0]=0
Key1Str is Invalid key length(0) or Type(0)
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
WscKeyASCII=8
WscKeyASCII=8
[RTMPReadParametersHook:297]wifi read profile faild.
load fw image from fw_header_image
AndesMTLoadFwMethod1(2263)::pChipCap->fw_len(64560)
FW Version:1
FW Build Date:20161213152835
CmdAddressLenReq:(ret = 0)
CmdFwStartReq: override = 1, address = 1048576
CmdStartDLRsp: WiFI FW Download Success
MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
efuse_probe: efuse = 10000002
RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
RtmpEepromGetDefault::e2p_dafault=2
RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
NVM is FLASH mode
1. Phy Mode = 14
exec!
spiflash_ioctl_read, Read from 0x007f0000 length 0x400, ret 0, retlen 0x400
eeFlashId = 0x7628!
Country Region from e2p = ffff
tssi_1_target_pwr_g_band = 34
2. Phy Mode = 14
3. Phy Mode = 14
NICInitPwrPinCfg(11): Not support for HIF_MT yet!
NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
mt_mac_init()-->
MtAsicInitMac()-->
mt7628_init_mac_cr()-->
MtAsicSetMacMaxLen(1277): Set the Max RxPktLen=450!
<--mt_mac_init()
WTBL Segment 1 info:
MemBaseAddr/FID:0x28000/0
EntrySize/Cnt:32/128
WTBL Segment 2 info:
MemBaseAddr/FID:0x40000/0
EntrySize/Cnt:64/128
WTBL Segment 3 info:
MemBaseAddr/FID:0x42000/64
EntrySize/Cnt:64/128
WTBL Segment 4 info:
MemBaseAddr/FID:0x44000/128
EntrySize/Cnt:32/128
AntCfgInit(2946): Not support for HIF_MT yet!
MCS Set = ff ff 00 00 01
MtAsicSetChBusyStat(861): Not support for HIF_MT yet!
FW LOG: !!!! Pass, dont need recal (total fail[0])
FW LOG: !!!! Pass, dont need recal (total fail[0])
FW LOG: !!!! Pass, dont need recal (total fail[0])
FW LOG: RxDCOC Set DC Valid(8)(2)
CmdSlotTimeSet:(ret = 0)
[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]ap_pmf_init:: apidx=1, MFPC=0, MFPR=0, SHA256=0
MtAsicSetRalinkBurstMode(3048): Not support for HIF_MT yet!
MtAsicSetPiggyBack(796): Not support for HIF_MT yet!
reload DPD from flash , 0x9F = [c400] doReload bit7[0]
CmdLoadDPDDataFromFlash: Channel = 1, DoReload = 0
MtAsicSetTxPreamble(3027): Not support for HIF_MT yet!
MtAsicAddSharedKeyEntry(1344): Not support for HIF_MT yet!
MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
ap_ftkd> Initialize FT KDP Module...
Main bssid = b0:4e:26:45:47:bc
<==== rt28xx_init, Status=0
@@@ ed_monitor_init : ===>
@@@ ed_monitor_init : <===
mt7628_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f, EDCCA_Status=1
WiFi Startup Cost (ra0): 3.464s
[ util_execSystem ] 139: oal_wlan_ra_initWlan cmd is "echo 1 > /proc/tplink/led_wlan_24G"
[ util_execSystem ] 139: oal_wlan_ra_setStaNum cmd is "iwpriv ra0 set MaxStaNum=32"
[ util_execSystem ] 139: device ra0 entered promiscuous mode
oal_br_addIntfInbr0: port 5(ra0) entering forwarding state
toBridge cmd is br0: port 5(ra0) entering forwarding state
"brctl addif br0 ra0"
[ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd device apcli0 entered promiscuous mode
is "brctl addif
====
@@@ ed_status_read: EDCCA TH - H
pAd->ed_trigger_cnt : 1 > 20 || pAd->ed_big_rssi_stat : 0 < 50
====
br0 apcli0"
[ util_execSystem ] 139: oal_br_addIntfIntoBridge cmd is "brctldevice ra1 entered promiscuous mode
addif br0 ra1"
[ util_execSystem ] 139: oal_wlan_ra_initEnd cmspiflash_ioctl_read, Read from 0x007f0000 length 0x2, ret 0, retlen 0x2
d is "wlNetlinkTool &"
[ util_execSystem ] 139: oal_wlan_ra_initEnd cmd is "killall -q wscd"
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_wlan_ra_initEnd cmd is "wscd -i ra0 -m 1 -w /var/tmp/wsc_upnp/ &"
[ util_execSystem ] 139: rsl_initLanWlanObj cmd is "echo 0 > /proc/tplink/wl_mode"
WLAN-Start wlNetlinkTool
[ util_execSystem ] 139: oal_wlan_ra_setCountryRegion cmd is "cp /etc/SingleSKU_5G_CE.dat /var/Wireless/RT2860AP/SingleSKU_5G.dat"
Waiting for Wireless Events from interfaces...
swWlanChkAhbErr: netlink to do
[ util_execSystem ] 139: oal_wlan_ra_setCountryRegion cmd is "iwpriv rai0 set CountryRegionABand=1"
rai0 no private ioctls.
[ util_execSystem ] 166: execute ok, exit status = 255
[ util_execSystem ] 139: oal_wlan_ra_updateSkuByIsoName cmd is "if [ -e /etc/SingleSKU_5G_DE.dat ]; then cp /etc/SingleSKU_5G_DE.dat /var/Wireless/RT2860AP/SingleSKU_5G.dat; fi"
[ util_execSystem ] 139: oal_wlan_ra_loadDriver cmd is "insmod /lib/modules/kmdir/kernel/drivers/net/wireless/MT7612_ap/MT7612_ap.ko"
wscd: SSDP UDP PORT = 1900
register mt7612, version: 3.0.4.0
pAd->CSRBaseAddress =0xc0d80000, csr_addr=0xc0d80000!
device_id =0x7662
RtmpOSFileOpen(): Error 2 opening /var/Wireless/RT2860AP/RT2860AP5G.dat
RTMPReadParametersHook: Open file "/var/Wireless/RT2860AP/RT2860AP5G.dat" failed!
wmode_band_equal(): Band Not Equal!
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
RTMPReadParametersHook: try default profile "/etc/RT2860AP5G.dat" ok!
RtmpEepromTypeAdjust: NVM is efuse and the information is too less to bring up the interface
RtmpEepromTypeAdjust: Force to use Flash mode
NVM is FLASH mode (pAd->flash_offset = 0x7f8000)
get_dev_name_prefix(): dev_idx = 1, dev_name_prefix = rai
[ util_execSystem ] 139: oal_wlan_ra_initWlan cmd is "ifconfig rai0 up"
spiflash_ioctl_read, Read from 0x007f8000 length 0x200, ret 0, retlen 0x200
wmode_band_equal(): Band Not Equal!
Key1Str is Invalid key length(0) or Type(0)
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 49
spiflash_ioctl_read, Read from 0x007f8000 length 0x200, ret 0, retlen 0x200
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (169)
get_chl_grp:illegal channel (169)
get_chl_grp:illegal channel (171)
get_chl_grp:illegal channel (171)
get_chl_grp:illegal channel (173)
get_chl_grp:illegal channel (173)
Country Region from e2p = ffff
2. Phy Mode = 49
3. Phy Mode = 49
AntCfgInit: primary/secondary ant 0/1
ChipStructAssign(): MT76x2 hook !
MCS Set = ff ff 00 00 01
TX0 power compensation = 0x38
TX1 power compensation = 0x38
[ util_execSystem ] 139: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ"
APStartUp(): AP Set CentralFreq at 42(Prim=40, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
APMakeAllBssBeacon: (3) The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
Main bssid = b0:4e:26:45:47:bb
mt76x2_reinit_agc_gain:original agc_vga0 = 0x5c, agc_vga1 = 0x5c
mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5c, agc_vga1 = 0x5c
mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x27, hi_lna1 = 0x27
mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x27, hi_lna1 = 0x27
<==== rt28xx_init, Status=0
get_dev_name_prefix(): dev_idx = 1, dev_name_prefix = rai
get_dev_name_prefix(): dev_idx = 1, dev_name_prefix = apclii
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
[ util_execSystem ] 139: oal_wlan_ra_initWlan cmd is "echo 1 > /proc/tplink/led_wlan_5G"
[ util_execSystem ] 139: oal_wlan_ra_setStaNum cmd is "iwpriv rai0 set MaxStaNum=32"
[ util_execSystem ] 139: device rai0 entered promiscuous mode
oal_br_addIntfInbr0: port 8(rai0) entering forwarding state
toBridge cmd is br0: port 8(rai0) entering forwarding state
"brctl addif br0 rai0"
[ util_execSystem ] 139: oal_br_addIntfIntoBridge cmddevice apclii0 entered promiscuous mode
is "brctl addif br0 apclii0"
[ util_execSystem ] 139: oal_br_addIntfIntoBridevice rai1 entered promiscuous mode
dge cmd is "brctl addif br0 rai1"
wlNetlinkTool isspiflash_ioctl_read, Read from 0x007f8000 length 0x2, ret 0, retlen 0x2
already there.
[ util_execSystem ] 139: oal_wlan_ra_initEnd cmd is "killall -q wscd_5G"
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_wlan_ra_initEnd cmd is "wscd_5G -i rai0 -m 1 -w /var/tmp/wsc_upnp_5G/ &"
[ util_execSystem ] 139: rsl_initLanWlanObj cmd is "echo 0 > /proc/tplink/wl_mode"
wscd: SSDP UDP PORT = 1900
sendto: No such file or directory
pid 734 send 2030 error
sendto: No such file or directory
pid 734 send 2004 error
[ util_execSystem ] 139: oal_startDhcps cmd is "dhcpd /var/tmp/dconf/udhcpd.conf"
[ util_execSystem ] 139: oal_lan6_startDhcp6s cmd is "dhcp6s -c /var/tmp/dconf/dhcp6s_br0.conf -P /var/run/dhcp6s_br0.pid br0 &"
[ util_execSystem ] 139: oal_lan6_startRadvd cmd is "radvd -C /var/tmp/dconf/radvd_br0.conf -p /var/run/radvd_br0.pid &"
[ util_execSystem ] 139: oal_br_delIntfFromBridge cmd is "brctl delif br0 eth0.2"
mldProxy# file: src/mld_ifinfo.c;line: 102; error = No such file or directory
mldProxy# Err: get LLA failed
iptables: Bad rule (does a matching rule exist in that chain?).
brctl: bridge br0: Invalid argument
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_intf_setIfMac cmd is "ifconfig eth0.2 down"
[ util_execSystem ] 139: oal_intf_setIfMac cmd is "ifconfig eth0.2 hw ether B0:4E:26:45:47:BD up"
[ util_execSystem ] 139: oal_intf_enableIntf cmd is "ifconfig eth0.2 up"
radvd starting
[Jan 01 01:00:15] radvd: no linklocal address configured for br0
[Jan 01 01:00:15] radvd: error parsing or activating the config file: /var/tmp/dconf/radvd_br0.conf
[ rsl_initAppObj ] 743: ==> start dhcp client
[ util_execSystem ] 139: oal_rip_updateConfig cmd is "rm -f /var/tmp/dconf/zebra.conf"
[ util_execSystem ] 139: oal_rip_updateConfig cmd is "rm -f /var/tmp/dconf/ripd.conf"
[ util_execSystem ] 139: removeAllRIPIpTableRule cmd is "iptables -L INPUT -v --line-numbers > /var/iptable"
[ getPidFromPidFile ] 112: Cann't open file: /var/run/zebra.pid.
[ util_execSystem ] 139: controlRipProcess cmd is "zebra -d -f /var/tmp/dconf/zebra.conf"
[ getPidFromPidFile ] 112: Cann't open file: /var/run/ripd.pid.
[ util_execSystem ] 139: oal_ipt_fwDdos cmd is "iptables -D FORWARD -j FIREWALL_DDOS
"
iptables: No chain/target/match by that name.
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_ipt_forbidLanPing cmd is "iptables -t filter -D INPUT -i br+ -p icmp --icmp-type echo-request -j DROP
iptables -t filter -D FORWARD -i br+ -p icmp --icmp-type echo-request -j DROP
"
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_ddos_delPingRule cmd is "iptables -t filter -D INPUT ! -i br+ -p icmp --icmp-type echo-request -j ACCEPT
"
iptables: Bad rule (does a matching rule exist in that chain?).
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_ipt_setDDoSRules cmd is "iptables -F FIREWALL_DDOS"
[ util_execSystem ] 139: ddos_clearAll cmd is "rm -f /var/tmp/dosHost"
[ util_execSystem ] 139: oal_initFirewallObj cmd is "ebtables -N FIREWALL"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -F"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -X"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -P INPUT ACCEPT"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -P FORWARD DROP"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -P OUTPUT ACCEPT"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -N FIREWALL"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -N FWRULE"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -N SETMSS"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i lo -p ALL -j ACCEPT -m comment --comment "loop back""
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i br+ -p tcp --dport 23 -j ACCEPT"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -p tcp --dport 23 -j DROP"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -i br+ -p icmpv6 --icmpv6-type echo-request -j ACCEPT"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A INPUT -p icmpv6 --icmpv6-type echo-request -j DROP"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -i br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -o br+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -A FORWARD -j FIREWALL"
[ util_execSystem ] 139: oal_initIp6FirewallObj cmd is "ip6tables -I FORWARD 1 -j SETMSS"
[ util_execSystem ] 139: oal_fw6_setFwEnabeld cmd is "ip6tables -D FIREWALL -j ACCEPT"
ip6tables: Bad rule (does a matching rule exist in that chain?).
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_fw6_setFwEnabeld cmd is "ip6tables -F FIREWALL"
[ util_execSystem ] 139: oal_fw6_setFwEnabeld cmd is "ip6tables -A FIREWALL -j ACCEPT"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_ftp.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_ftp.ko"
[ util_execSystem ] 139: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 500 -j DROP"
iptables: Bad rule (does a matching rule exist in that chain?).
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_pptp.ko"
[ util_execSystem ] 139: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p tcp --dport 1723 -j DROP"
iptables: Bad rule (does a matching rule exist in that chain?).
[ util_execSystem ] 166: execute ok, exit status = 1
[ util_execSystem ] 139: oal_openAlg cmd is "iptables -D FORWARD_VPN_PASSTHROUGH -p udp --dport 1701 -j DROP"
iptables: Bad rule (does a matching rule exist in that chain?).
[ util_execSystem ] 166: execute ok, exit status = 1continue...
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_tftp.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_tftp.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_h323.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_h323.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_sip.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_sip.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_rtsp.ko"
[ util_execSystem ] 139: setupModules cmd is "insmod /lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_rtsp.ko"
nf_nat_rtsp v0.6.21 loading
enable switch phyport...
Set: phy[0].reg[0] = 3900
Set: phy[1].reg[0] = 3900
Set: phy[2].reg[0] = 3900
Set: phy[3].reg[0] = 3900
Set: phy[4].reg[0] = 3900
Set: phy[0].reg[0] = 3300
Set: phy[1].reg[0] = 3300
Set: phy[2].reg[0] = 3300
[cmd_dutInit():1059] init shm
[tddp_taskEntry():151] tddp task start
Set: phy[3].reg[0] = 3300
Set: phy[4].reg[0] = 3300
resetMiiPortV over.
[ util_execSystem ] 139: prepareDropbear cmd is "dropbearkey -t rsa -f /var/tmp/dropbear/dropbear_rsa_host_key"
Will output 1024 bit rsa secret key to '/var/tmp/dropbear/dropbear_rsa_host_key'
Generating key, this may take a while...
[ util_execSystem ] 139: prepareDropbear cmd is "dropbearkey -t dss -f /var/tmp/dropbear/dropbear_dss_host_key"
Will output 1024 bit dss secret key to '/var/tmp/dropbear/dropbear_dss_host_key'
Generating key, this may take a while...
[ util_execSystem ] 139: prepareDropbear cmd is "dropbear -p 22 -r /var/tmp/dropbear/dropbear_rsa_host_key -d /var/tmp/dropbear/dropbear_dss_host_key -A /var/tmp/dropbear/dropb"
[ util_execSystem ] 139: oal_sys_unsetTZ cmd is "echo "" > /etc/TZ"I just installed openwrt-ramips-mt76x8-c50-v3-squashfs-tftp-recovery.bin from Heinz
Log (installation and first boot):
starting recovery...
TODO, Read MAC Address from Flash
netboot_common, argc= 3
NetTxPacket = 0x83FE3900
KSEG1ADDR(NetTxPacket) = 0xA3FE3900
NetLoop,call eth_halt !
NetLoop,call eth_init !
Trying Eth0 (10/100-M)
Waitting for RX_DMA_BUSY status Start... done
ETH_STATE_ACTIVE!!
TFTP from server 192.168.0.66; our IP address is 192.168.0.2
Filename 'tp_recovery.bin'.
TIMEOUT_COUNT=10,Load address: 0x80060000
Loading: checksum bad
checksum bad
Got ARP REPLY, set server/gtwy eth addr (00:24:1d:8c:2d:20)
Got it
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
############################
done
Bytes transferred = 8126464 (7c0000 hex)
NetBootFileXferSize= 007c0000
Erase flash !!
From 0x20000 length 0x7A0000
..........................................................................................................................
Copy 0x80080000 to 0x00020000, count 0x7A0000....
..........................................................................................................................
[04030C08][04030C0B]
DDR Calibration DQS reg = 00008785
U-Boot 1.1.3 (Aug 18 2017 - 09:57:27)
Board: Ralink APSoC DRAM: 64 MB
relocate_code Pointer at: 83fb4000
******************************
Software System Reset Occurred
******************************
gpiomode1 54154404.
gpiomode2 05540555.
flash manufacture id: c8, device id 40 17
find flash: GD25Q64B
============================================
Ralink UBoot Version: 4.3.0.0
--------------------------------------------
ASIC 7628_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Aug 18 2017 Time:09:57:27
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768
##### The CPU freq = 580 MHZ ####
estimate memory size =64 Mbytes
RESET MT7628 PHY!!!!!!
continue to starting system.
0
disable switch phyport...
3: System Boot system code via Flash.(0xbc020000)
do_bootm:argc=2, addr=0xbc020000
## Booting image at bc020000 ...
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64
Starting kernel ...
[ 0.000000] Linux version 4.9.70 (hyniu@o2.pl) (gcc version 5.5.0 (LEDE GCC 5.5.0 r5217-098afa1) ) #0 Sat Dec 23 09:34:32 2017
[ 0.000000] Board has DDR2
[ 0.000000] Analog PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[ 0.000000] MIPS: machine is TP-Link Archer C50 v3
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=0004efe0
[ 0.000000] Readback ErrCtl register=0004efe0
[ 0.000000] Memory: 60440K/65536K available (3142K kernel code, 154K rwdata, 752K rodata, 168K init, 209K bss, 5096K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] intc: using register map from devicetree
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource_probe: no matching clocksources found
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[ 0.007529] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[ 0.070046] pid_max: default: 32768 minimum: 301
[ 0.074631] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080967] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.094313] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103807] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.109729] pinctrl core: initialized pinctrl subsystem
[ 0.115403] NET: Registered protocol family 16
[ 0.227439] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
[ 0.382727] PCI host bridge /pcie@10140000 ranges:
[ 0.387303] MEM 0x0000000020000000..0x000000002fffffff
[ 0.392328] IO 0x0000000010160000..0x000000001016ffff
[ 0.410248] mt7621_gpio 10000600.gpio: registering 32 gpios
[ 0.415919] mt7621_gpio 10000600.gpio: registering 32 gpios
[ 0.421534] mt7621_gpio 10000600.gpio: registering 32 gpios
[ 0.427679] PCI host bridge to bus 0000:00
[ 0.431635] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[ 0.438215] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 0.443940] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.450482] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.458590] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.466994] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 0.473372] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 0.480049] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[ 0.486611] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[ 0.493570] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[ 0.500142] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[ 0.507194] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[ 0.514159] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.518941] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
[ 0.525503] pci 0000:00:00.0: bridge window [mem 0x20100000-0x201fffff pref]
[ 0.532478] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[ 0.538107] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[ 0.547431] clocksource: Switched to clocksource MIPS
[ 0.553597] NET: Registered protocol family 2
[ 0.558688] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.565381] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.571568] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.577763] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.583360] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.589713] NET: Registered protocol family 1
[ 0.596950] Crashlog allocated RAM at address 0x3f00000
[ 0.603177] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[ 0.617743] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.623319] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.641688] io scheduler noop registered
[ 0.645419] io scheduler deadline registered (default)
[ 0.651248] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 0.658591] console [ttyS0] disabled
[ 0.662027] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[ 0.670799] console [ttyS0] enabled
[ 0.670799] console [ttyS0] enabled
[ 0.677790] bootconsole [early0] disabled
[ 0.677790] bootconsole [early0] disabled
[ 0.687102] spi-mt7621 10000b00.spi: sys_freq: 193333333
[ 0.697984] m25p80 spi32766.0: using chunked io (size=32)
[ 0.703476] m25p80 spi32766.0: gd25q64 (8192 Kbytes)
[ 0.708558] 4 ofpart partitions found on MTD device spi32766.0
[ 0.714469] Creating 4 MTD partitions on "spi32766.0":
[ 0.719698] 0x000000000000-0x000000020000 : "boot"
[ 0.726331] 0x000000020000-0x0000007c0000 : "firmware"
[ 0.781523] 2 tplink-fw partitions found on MTD device firmware
[ 0.787568] 0x000000020000-0x00000016a45f : "kernel"
[ 0.794224] 0x00000016a460-0x0000007c0000 : "rootfs"
[ 0.801157] mtd: device 3 (rootfs) set to be root filesystem
[ 0.807502] 1 squashfs-split partitions found on MTD device rootfs
[ 0.813790] 0x000000390000-0x0000007c0000 : "rootfs_data"
[ 0.820931] 0x0000007c0000-0x0000007d0000 : "config"
[ 0.827854] 0x0000007d0000-0x000000800000 : "factory"
[ 0.835498] libphy: Fixed MDIO Bus: probed
[ 0.849707] rt3050-esw 10110000.esw: link changed 0x00
[ 0.856507] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[ 0.866519] NET: Registered protocol family 10
[ 0.874195] NET: Registered protocol family 17
[ 0.878839] 8021q: 802.1Q VLAN Support v1.8
[ 0.892758] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 0.900890] Freeing unused kernel memory: 168K
[ 0.905395] This architecture does not have kernel memory protection.
[ 2.030869] init: Console is alive
[ 2.034554] init: - watchdog -
[ 2.337436] random: fast init done
[ 3.293672] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.502434] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.520304] init: - preinit -
[ 4.889118] rt3050-esw 10110000.esw: link changed 0x00
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.055797] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 8.086939] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 8.292860] procd: - early -
[ 8.295888] procd: - watchdog -
[ 8.491558] rt3050-esw 10110000.esw: link changed 0x02
[ 8.931621] procd: - watchdog -
[ 8.935080] procd: - ubus -
[ 9.112648] procd: - init -
Please press Enter to activate this console.
[ 9.619481] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.630448] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.647765] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 9.655890] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 9.665968] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.680121] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 9.740232] xt_time: kernel timezone is -0000
[ 9.801624] mt76_wmac 10300000.wmac: ASIC revision: 76280001
[ 9.812415] mt76_wmac 10300000.wmac: Firmware Version: _e2_mp
[ 9.818345] mt76_wmac 10300000.wmac: Build Time: 20150211175503
[ 9.837429] firmware init done
[ 10.092412] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[ 10.099850] mt76x2e 0000:01:00.0: EEPROM data check failed: ffff
[ 10.118574] mt76x2e 0000:01:00.0: ROM patch already applied
[ 10.380979] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[ 10.386558] mt76x2e 0000:01:00.0: Build: 1
[ 10.390753] mt76x2e 0000:01:00.0: Build Time: 201507311614____Nice. Thanks for bootlog.
Here is new image:
try it.
1 Like
@Holyyshek please check if all leds, LAN/WAN ports, Wifi, mac address on all interfaces ( lan wan wlan wlan5ghz) are working OK,
1 Like