Support for Mudi 7 GL-E5800 from GL-iNet (hotspot)

Hardware Questions and Recommendations
1

Hi OpenWrt Community,

I'd like to bring attention to a new WiFi 7 hotspot from GL.iNet, the GL-E5800 .

Product Link: https://www.gl-inet.com/products/gl-e5800/
User Guide https://docs.gl-inet.com/router/en/4/user_guide/gl-e5800/
Data sheet https://static.gl-inet.com/www/images/products/datasheet/e5800_datasheet_20260212.pdf

It comes shipped with
OpenWrt Version OpenWrt 23.05.4 r24012-d8dd03c46f
Kernel Version 5.15.170-perf
Architecture ARMv8 Processor rev 0
Flash 7.28 GB / 2.69 GB still free, no SD card slot.

Teardown video: https://youtu.be/H2QzkcKeY_U

I'm creating this topic to gauge interest and gather information. If anyone gets this device and is willing to share boot logs, dissection photos, or technical details, it would be greatly appreciated.

I have this device now for a week but I am not a developer. I am happy to help on any request.
For my personal use case I was able to create a script to link the WiFi 5Ghz/6Ghz user interface toggle to reconnect to my netbird mesh network so I can connect my phone to my homelab.

Looking forward to any insights or discussion!

Thanks,
Routermanager

2

what a joke, they didn't do the relevant part; remove the heat sink.

you said you got one, why can't you ?

3

Their website says Qualcomm chip, so I wouldn’t expect any great Linux/official OpenWrt support anytime soon. Gl.inet makes good stuff but stick with their MediaTek based devices (edit: or use their fork of the firmware which uses close sourced drivers).

4

I did not know how to collect it without a console port but according to the AI this is what should be included? I just rebooted it and got that now. What else is relevant?

logread > /tmp/bootlog.txt
dmesg >> /tmp/bootlog.txt

I am more a network guy and only with openwrt for a few months but I am happy to learn.

5

I am allowed to share dropbox links here? The file is to big.
How do you share it normally?

6

In the weekend if both kids are sleeping I hope to find some time and I could open it

7

dmesg is a good start, just post it, use the </> button on top of the edit window when you paste the log.

you can use pastebin

split it into several post, if needed, I think max message size is 32k chars.

if you paste the log you might not need to, at least not now.

10

we need the left column counter as close to 0 as possible.

run dmesg right after you've rebooted it.

you can delete your two posts.

11 

[    0.311625][    T1] arm-smmu 15000000.apps-smmu: SMMUv2 with:
[    0.311646][    T1] arm-smmu 15000000.apps-smmu: 	stage 1 translation
[    0.311652][    T1] arm-smmu 15000000.apps-smmu: 	coherent table walk
[    0.311657][    T1] arm-smmu 15000000.apps-smmu: 	stream matching with 57 register groups
[    0.311669][    T1] arm-smmu 15000000.apps-smmu: 	23 context banks (0 stage-2 only)
[    0.311690][    T1] arm-smmu 15000000.apps-smmu: 	Supported page sizes: 0x61311000
[    0.311696][    T1] arm-smmu 15000000.apps-smmu: 	Stage-1: 36-bit VA -> 42-bit IPA
[    0.312943][    T1] iommu: Default domain type: Translated
[    0.312950][    T1] iommu: DMA domain TLB invalidation policy: strict mode
[    0.313351][    T1] SCSI subsystem initialized
[    0.313465][    T1] usbcore: registered new interface driver usbfs
[    0.313495][    T1] usbcore: registered new interface driver hub
[    0.313521][    T1] usbcore: registered new device driver usb
[    0.314168][    T1] mc: Linux media interface: v0.10
[    0.314195][    T1] videodev: Linux video capture interface: v2.00
[    0.314251][    T1] pps_core: LinuxPPS API ver. 1 registered
[    0.314256][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.314268][    T1] PTP clock support registered
[    0.314289][    T1] power_supply_init_attrs: Property 74 skipped because it is missing from power_supply_attrs
[    0.314442][    T1] EDAC MC: Ver: 3.0.0
[    0.315066][    T1] IPA framework init
[    0.316325][    T1] Advanced Linux Sound Architecture Driver Initialized.
[    0.316911][    T1] nfc: nfc_init: NFC Core ver 0.1
[    0.316944][    T1] NET: Registered PF_NFC protocol family
[    0.316950][    T1] pcie:pcie_init.
[    0.318073][    T1] clocksource: Switched to clocksource arch_sys_counter
[    0.349206][    T1] VFS: Disk quotas dquot_6.6.0
[    0.349269][    T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.350564][    T1] sdxpinn-debugcc soc:clock-controller@0: Registered debug measure clocks
[    0.357159][    T1] set_download_mode: 0
[    0.357258][    T1] qcom_dload_probe: Current dump mode: 0x0
[    0.358055][    T1] NET: Registered PF_INET protocol family
[    0.358185][    T1] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.358963][    T1] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.359026][    T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.359107][    T1] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.359214][    T1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.359357][    T1] TCP: Hash tables configured (established 16384 bind 16384)
[    0.359504][    T1] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.359553][    T1] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.359584][    T1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.359714][    T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.360125][    T1] NET: Registered PF_XDP protocol family
[    0.360138][    T1] PCI: CLS 0 bytes, default 64
[    0.361248][    T1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.362841][    T1] Initialise system trusted keyrings
[    0.363033][    T1] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.367972][    T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.368159][    T1] fuse: init (API version 7.36)
[    0.392942][    T1] Key type asymmetric registered
[    0.392953][    T1] Asymmetric key parser 'x509' registered
[    0.393041][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 237)
[    0.393049][    T1] io scheduler mq-deadline registered
[    0.393055][    T1] io scheduler kyber registered
[    0.393152][    T1] io scheduler bfq registered
[    0.401638][    T1] gpi_dma 900000.qcom,gpi-dma: Adding to iommu group 0
[    0.404542][    T1] geni_se_qup 9c0000.qcom,qupv3_0_geni_se: Adding to iommu group 1
[    0.420052][    T1] v0.19, id=609, ver=1.0, raw_id=501, raw_ver=0, hw_plat=34, hw_plat_ver=65536
[    0.420052][    T1]  accessory_chip=0, hw_plat_subtype=2, pmic_model=65610, pmic_die_revision=131073 foundry_id=1 serial_number=1236318697 num_pmics=2 chip_family=0x89 raw_device_family=0xa raw_device_number=0xb nproduct_id=0x443 num_clusters=0x1 ncluster_array_offset=0xd8 num_subset_parts=0x14 nsubset_parts_array_offset=0xdc nmodem_supported=0xffffffff feature_code=0x0 pcode=0x0 sku=SDXPINNL-0-(null) hw_plat_oem_variant=0 num_kvps=0 kvps_offset=316 num_func_clusters=0 boot_cluster=0 boot_core=0
[    0.422013][    T1] ff0000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 128, base_baud = 0) is a EUD UART
[    0.422040][    T1] QL-DYNAMIC-PROP: read value of [qcom,msm-eud@ff0000:quectel,dynamic-props-pcie:status] failed
[    0.422985][    T1] qcom-llcc 19200000.cache-controller: invalid resource
[    0.423693][    T1] msm_mem_dump soc:mem_dump: assigned reserved memory node mem_dump_region
[    0.427508][    T1] MSM Memory Dump apps data table set up
[    0.428218][    T1] msm-dcc 240ff000.dcc_v2: ll-reg-offsets property doesn't exist
[    0.437175][    T1] mpm_hr_counter: can't find DT node
[    0.437339][    T1] KPI: Bootloader start count = 75919
[    0.437347][    T1] KPI: Bootloader end count = 171358
[    0.437352][    T1] KPI: Bootloader load kernel count = 30086
[    0.437358][    T1] KPI: Kernel MPM timestamp = 191747
[    0.437361][    T1] KPI: Kernel MPM Clock frequency = 32768
[    0.437626][    T1] msm_hang_detect_probe: Missing cluster-id.
[    0.437634][    T1] msm_hang_detect_probe: Failed to get qcom,chd-percpu-info DT property
[    0.437638][    T1] msm_hang_detect: probe of soc:qcom,chd failed with error -22
[    0.439093][    T1] qcom-va-minidump soc:va_mini_dump: assigned reserved memory node va_md_mem_region
[    0.478734][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.481400][    T1] msm_serial: driver initialized
[    0.485876][   T18] cacheinfo: Unable to detect cache hierarchy for CPU 1
[    0.491001][    T1] brd: module loaded
[    0.495786][    T1] loop: module loaded
[    0.496094][    T1] zram: Added device: zram0
[    0.497238][    T1] qcom_system_heap_create: DMA-BUF Heap: Created 'qcom,system'
[    0.497331][    T1] qcom_system_heap_create: DMA-BUF Heap: Created 'system'
[    0.497427][    T1] qcom_secure_system_heap_create: DMA-BUF Heap: Created 'qcom,secure-pixel'
[    0.497513][    T1] qcom_secure_system_heap_create: DMA-BUF Heap: Created 'qcom,secure-non-pixel'
[    0.497837][    T1] platform soc:qcom,dma-heaps:qcom,user_contig: assigned reserved memory node user_contig_region
[    0.498029][    T1] platform soc:qcom,dma-heaps:qcom,qseecom: assigned reserved memory node qseecom_region
[    0.498240][    T1] platform soc:qcom,dma-heaps:qcom,qseecom_ta: assigned reserved memory node qseecom_ta_region
[    0.498458][    T1] platform soc:qcom,dma-heaps:qcom,audio: assigned reserved memory node audio_heap_region@88b00000
[    0.498578][    T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,user-contig
[    0.498664][    T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,qseecom
[    0.498752][    T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,qseecom-ta
[    0.499463][    T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,audio
[    0.499629][    T1] Loading iSCSI transport class v2.0-870.
[    0.502421][    T1] wireguard: WireGuard 1.0.0 loaded. See ``www.wireguard.com`` for information.
[    0.502437][    T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    0.502881][    T1] MACsec IEEE 802.1AE
[    0.504200][    T1] tun: Universal TUN/TAP device driver, 1.6
[    0.504545][    T1] PPP generic driver version 2.4.2
[    0.504658][    T1] PPP BSD Compression module registered
[    0.504666][    T1] PPP Deflate Compression module registered
[    0.504688][    T1] PPP MPPE Compression module registered
[    0.504694][    T1] NET: Registered PF_PPPOX protocol family
[    0.504717][    T1] PPTP driver version 0.8.5
[    0.508929][    T1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    0.685297][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.685325][    T1] ehci-pci: EHCI PCI platform driver
[    0.685402][    T1] ehci-platform: EHCI generic platform driver
[    0.686490][    T1] usbcore: registered new interface driver cdc_acm
[    0.686505][    T1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.686742][    T1] usbcore: registered new interface driver uas
[    0.686788][    T1] usbcore: registered new interface driver usb-storage
[    0.686814][    T1] usbcore: registered new interface driver usb_ehset_test
[    0.686839][    T1] usbcore: registered new interface driver lvs
[    1.209040][    T1] usbcore: registered new interface driver xpad
[    1.210407][    T1] i2c_dev: i2c /dev entries driver
[    1.210845][    T1] usbcore: registered new interface driver uvcvideo
[    1.210860][    T1] gspca_main: v2.14.0 registered
[    1.221255][    T1] userspace-cdev soc:qcom,userspace-cdev: cdev:ethernet-usxgmii lvl:2 registered
[    1.221375][    T1] userspace-cdev soc:qcom,userspace-cdev: cdev:ethernet-sgmii lvl:3 registered
[    1.221426][    T1] userspace-cdev soc:qcom,userspace-cdev: cdev:battery-charger-cur lvl:4 registered
[    1.221473][    T1] userspace-cdev soc:qcom,userspace-cdev: cdev:lcd-current lvl:1 registered
[    1.221520][    T1] userspace-cdev soc:qcom,userspace-cdev: cdev:chargeic-current lvl:2 registered
[    1.221975][    T1] device-mapper: uevent: version 1.0.3
[    1.222259][    T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: ``dm-devel@redhat.com
[    1.222849][    T1] EDAC DEVICE0: Giving out device to module soc:kryo_erp controller cache: DEV soc:kryo_erp (INTERRUPT)
[    1.223607][    T1] EDAC DEVICE1: Giving out device to module qcom_llcc_edac controller llcc: DEV qcom_llcc_edac (INTERRUPT)
[    1.223973][    T1] cpuidle: using governor qcom-cpu-lpm
[    1.225982][    T1] sdhci: Secure Digital Host Controller Interface driver
[    1.225996][    T1] sdhci: Copyright(c) Pierre Ossman
[    1.226001][    T1] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.227198][    T1] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    1.227253][    T1] hid: raw HID events driver (C) Jiri Kosina
[    1.228006][    T1] ashmem: initialized
[    1.228372][    T1] SPI driver fb_gc9307c has no spi_device_id for galaxycore,gc9307c
[    1.230317][    T1] [1]: __qmp_rx_worker: RX int without negotiation ack
[    1.261248][    T1] qcom_q6v5_pas 4080000.remoteproc-mss: assigned reserved memory node linux,cma
[    1.262535][    T1] remoteproc remoteproc0: 4080000.remoteproc-mss is available
[    1.264863][   T86] kworker/u8:0 (86) used greatest stack depth: 13712 bytes left
[    1.265043][    T1]  cs_system_cfg: CoreSight Configuration manager initialised
[    1.266549][    T1] coresight-tmc 24048000.tmc: Adding to iommu group 2
[    1.267689][    T1] coresight-tmc 2404f000.tmc: Adding to iommu group 3
[    1.280256][    T1] coresight coresight-stm: STM32 initialized
[    1.280788][    T1] coresight coresight-cti-qc_cti: CTI initialized
[    1.281123][    T1] coresight coresight-cti-apss_dl_cti: CTI initialized
[    1.281405][    T1] coresight coresight-cti-apss_cti0: CTI initialized
[    1.281667][    T1] coresight coresight-cti-apss_cti1: CTI initialized
[    1.281924][    T1] coresight coresight-cti-apss_cti2: CTI initialized
[    1.282232][    T1] coresight coresight-cti-cti0: CTI initialized
[    1.282487][    T1] coresight coresight-cti-ddr_ch01_dl_cti_0: CTI initialized
[    1.282741][    T1] coresight coresight-cti-ddr_dl_0_cti_0: CTI initialized
[    1.282982][    T1] coresight coresight-cti-ddr_dl_1_cti_0: CTI initialized
[    1.283215][    T1] coresight coresight-cti-swao_cti: CTI initialized
[    1.283447][    T1] coresight coresight-cti-mss_cti: CTI initialized
[    1.283673][    T1] coresight coresight-cti-mss_q6_cti: CTI initialized
[    1.283892][    T1] coresight coresight-cti-mss_vq6_cti: CTI initialized
[    1.303621][    T1] coresight-csr 24001000.csr: CSR initialized: coresight-csr
[    1.303793][    T1] coresight-csr 24b11000.csr: CSR initialized: coresight-swao-csr
[    1.304903][    T1] coresight-dummy soc:snoc: Dummy device initialized
[    1.305613][    T1] coresight-dummy soc:modem_diag: Dummy device initialized
[    1.305926][    T1] coresight-dummy soc:dummy_sink: Dummy device initialized
[    1.306845][    T1] coresight-dummy soc:dummy_replicator: Dummy device initialized
[    1.308089][    T1] coresight-remote-etm soc:modem_etm0: Remote ETM initialized
[    1.308762][    T1] coresight-remote-etm soc:modem2_etm0: Remote ETM initialized
[    1.312190][    T1] gnss: GNSS driver registered with major 495
[    1.315465][    T1] GACT probability NOT on
[    1.315493][    T1] Mirror/redirect action on
[    1.315563][    T1] netem: version 1.3
[    1.315649][    T1] u32 classifier
[    1.315655][    T1]     input device check on
[    1.315660][    T1]     Actions configured
[    1.316482][    T1] xt_time: kernel timezone is -0000
[    1.316579][    T1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    1.316899][    T1] gre: GRE over IPv4 demultiplexor driver
[    1.316909][    T1] ip_gre: GRE over IPv4 tunneling driver
[    1.317562][    T1] IPv4 over IPsec tunneling driver
[    1.317829][    T1] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[    1.317853][    T1] Initializing XFRM netlink socket
[    1.317871][    T1] IPsec XFRM device driver
[    1.318218][    T1] NET: Registered PF_INET6 protocol family
[    1.319417][    T1] Segment Routing with IPv6
[    1.319446][    T1] In-situ OAM (IOAM) with IPv6
[    1.319543][    T1] mip6: Mobile IPv6
[    1.320254][    T1] ip6_gre: GRE over IPv6 tunneling driver
[    1.320537][    T1] NET: Registered PF_PACKET protocol family
[    1.320558][    T1] NET: Registered PF_KEY protocol family
[    1.320635][    T1] Bridge firewalling registered
[    1.320667][    T1] can: controller area network core
[    1.320735][    T1] NET: Registered PF_CAN protocol family
[    1.320909][    T1] l2tp_core: L2TP core driver, V2.0
[    1.320923][    T1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.320929][    T1] l2tp_netlink: L2TP netlink interface
[    1.320956][    T1] 8021q: 802.1Q VLAN Support v1.8
[    1.320973][    T1] tipc: Activated (version 2.0.0)
[    1.321067][    T1] NET: Registered PF_TIPC protocol family
[    1.321136][    T1] tipc: Started in single node mode
[    1.322513][    T1] NET: Registered PF_IEEE802154 protocol family
[    1.322782][    T1] NET: Registered PF_VSOCK protocol family
[    1.324079][    T1] registered taskstats version 1
[    1.324100][    T1] Loading compiled-in X.509 certificates
12 
[    1.324958][    T1] Loaded X.509 cert 'Build time autogenerated kernel key: b03a0eb86152554315e1fd01de2e8e3f553fdcb1'
[    1.325195][    T1] page_owner is disabled
[    1.325490][    T1] Key type .fscrypt registered
[    1.325499][    T1] Key type fscrypt-provisioning registered
[    1.342311][    T9] cpu cpu0: EM: created perf domain
[    1.344165][   T40] spmi spmi-0: PMIC arbiter version v7 (0x70000001)
[    1.346264][   T57] pci-msm 1bf0000.qcom,pcie: PCIe: msm_pcie_probe
[    1.346732][   T57] msm_pcie_get_reg: PCIe: RC0: no tcsr resource found.
[    1.346754][   T57] msm_pcie_get_reg: PCIe: RC0: no rumi resource found.
[    1.346758][    T9] qcom-ethqos 22fc0000.qcom,emac1: Adding to iommu group 4
[    1.349127][    T9] qcom-ethqos 22fc0000.qcom,emac1: IRQ eth_wake_irq not found
[    1.349150][    T9] qcom-ethqos 22fc0000.qcom,emac1: IRQ eth_lpi not found
[    1.353145][   T40] qcom,qpnp-power-on c42d000.qcom,spmi:qcom,pmk8550@0:pon_pbs@800: IRQ pmic-wd-bark not found
[    1.358775][   T40] spmi spmi-0: pmic_arb_wait_for_done: 0xa 0x104: transaction failed (0x3)
[    1.430155][    T9] qcom-ethqos 22fc0000.qcom,emac1: snps,phy-addr property is deprecated
[    1.430685][    T9] qcom-ethqos 22fc0000.qcom,emac1: PTP uses main clock
[    1.430711][    T9] qcom-ethqos qcom_ethqos_probe_config_dt:7433 RX QOS queues = 0, TX QOS queues = 0 RX queues = 2 TX queues = 2
[    1.431844][    T9] qcom-ethqos qcom_ethqos_probe:7713 emac-phy-off-suspend = 0
[    1.431866][    T9] qcom-ethqos qcom_ethqos_probe:7734 has_xgmac = 1 GMAC4_version_id = 0x31
[    1.431875][    T9] qcom-ethqos qcom_ethqos_probe:7744 emac_core_version = 1073741824
[    1.431992][    T9] qcom-scm: __qcom_scm_get_emac_maxspeed: scm get max_spd ret=0x0 res0 = 0 res1 =0 res2 = 0
[    1.432002][    T9] qcom-ethqos qcom_ethqos_probe:7750 7750 qcom_ethqos_probe max speed = 0
[    1.432226][    T9] qcom-ethqos 22fc0000.qcom,emac1: User ID: 0x76, Synopsys ID: 0x31
[    1.432242][    T9] qcom-ethqos 22fc0000.qcom,emac1: 	XGMAC2
[    1.432250][    T9] qcom-ethqos 22fc0000.qcom,emac1: DMA HW capability register supported
[    1.432256][    T9] qcom-ethqos 22fc0000.qcom,emac1: RX Checksum Offload Engine supported
[    1.432262][    T9] qcom-ethqos 22fc0000.qcom,emac1: COE Type 1
[    1.432268][    T9] qcom-ethqos 22fc0000.qcom,emac1: TX Checksum insertion supported
[    1.432273][    T9] qcom-ethqos 22fc0000.qcom,emac1: TSO supported
[    1.432280][    T9] qcom-ethqos 22fc0000.qcom,emac1: Enable RX Mitigation via HW Watchdog Timer
[    1.432286][    T9] qcom-ethqos 22fc0000.qcom,emac1: Enabled L3L4 Flow TC (entries=8)
[    1.432292][    T9] qcom-ethqos 22fc0000.qcom,emac1: Enabled RFS Flow TC (entries=8)
[    1.432301][    T9] qcom-ethqos 22fc0000.qcom,emac1: Enabling HW TC (entries=128, max_off=64)
[    1.432307][    T9] qcom-ethqos 22fc0000.qcom,emac1: TSO feature enabled
[    1.432313][    T9] qcom-ethqos 22fc0000.qcom,emac1: Using 40 bits DMA width
[    1.432379][    T9] qcom-ethqos 22fc0000.qcom,emac1: [wtr_eth]probe_capabilities 3
[    2.006741][    T9] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_probe
[    2.006754][    T9] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_intr
[    2.007697][    T9] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_get_features
[    2.008545][    T9] qcom-ethqos 22fc0000.qcom,emac1: [wtr_eth] mdio c22 got phy id 0x001cc849 on addr 1
[    2.008555][    T9] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: attached PHY driver (mii_bus:phy_addr=stmmac_dev1-0:01, irq=POLL)
[    2.008563][    T9] qcom-ethqos 22fc0000.qcom,emac1: Successfully registered MDIO to PHY address 1
[    2.009263][    T9] qcom-scm: __qcom_scm_iomacro_dump: scm io macro dump 0x2303f000 buf = 0x82801000 len = 0x200
[    2.009451][    T9] qcom-ethqos 22fc0000.qcom,emac1: ext_snapshot_num = 0
[    2.009725][    T9] qcom-scm: __qcom_scm_ethqos_configure: scm ethqos configure 0x2303f000 0xa 0x4 0x82800000, 0x200 done =0x0
[    2.009746][    T9] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1398 qcom_ethqos_serdes_update_sgmii : Serdes Speed set to 1GB speed
[    2.014196][    T9] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1413 qcom_ethqos_serdes_update_sgmii : Exit serdes speed = 1000
[    2.014296][    T9] qcom-ethqos 22fc0000.qcom,emac1: IRQ pcs_intr not found
[    2.014306][    T9] qcom-ethqos ethqos_xpcs_intr_config:49 XPCS IRQ configuration information not found
[    2.014313][    T9] qcom-ethqos ethqos_xpcs_init:99 No DTSI entry found for XPCS interrupt, using non-interrupt mode
[    2.014328][    T9] qcom-ethqos ethqos_xpcs_init:111 Successfully initialized XPCS
[    2.015366][    T9] qcom-ethqos ethqos_serdes_power_saving:6660 power saving turned on
[    2.015376][    T9] qcom-ethqos ethqos_enable_power_saving:6789 EMAC = 1 Save Power = 1 ps_refcount = 1->0
[    2.015674][    T9] pwm-backlight soc:backlight: supply power not found, using dummy regulator
[    2.017043][    T9] PMIC PON log: Reset Trigger: PS_HOLD
[    2.017075][    T9] PMIC PON log: Reset Type: SHUTDOWN
[    2.017095][    T9] PMIC PON log: Reset Type: SHUTDOWN
[    2.017146][    T9] PMIC PON log: PON Trigger: KPDPWR_N
[    2.017237][    T9] PMIC PON log: Reset Trigger: PS_HOLD
[    2.017257][    T9] PMIC PON log: Reset Type: SHUTDOWN
[    2.017276][    T9] PMIC PON log: Reset Type: SHUTDOWN
[    2.017325][    T9] PMIC PON log: PON Trigger: KPDPWR_N
[    2.017417][    T9] PMIC PON log: Reset Trigger: PS_HOLD
[    2.017436][    T9] PMIC PON log: Reset Type: SHUTDOWN
[    2.017456][    T9] PMIC PON log: Reset Type: SHUTDOWN
[    2.017504][    T9] PMIC PON log: PON Trigger: KPDPWR_N
[    2.017596][    T9] PMIC PON log: Reset Trigger: PS_HOLD
[    2.017615][    T9] PMIC PON log: Reset Type: HARD_RESET
[    2.017641][    T9] PMIC PON log: Reset Type: HARD_RESET
[    2.017689][    T9] PMIC PON log: PON Trigger: HARD_RESET
[    2.017780][    T9] PMIC PON log: Reset Trigger: PS_HOLD
[    2.017799][    T9] PMIC PON log: Reset Type: HARD_RESET
[    2.017817][    T9] PMIC PON log: Reset Type: HARD_RESET
[    2.017866][    T9] PMIC PON log: PON Trigger: HARD_RESET
[    2.018535][    T9] qcom-bwmon: Zone thres larger than hw limit: hi:97 med:400 lo:0
[    2.020327][    T9] 984000.qcom,qup_uart: ttyMSM0 at MMIO 0x984000 (irq = 120, base_baud = 0) is a MSM
[    6.353607][    T9] printk: console [ttyMSM0] enabled
[    6.359918][    T9] msm_geni_serial 98c000.qcom,qup_uart: Wakeup byte 0xfd
[    6.367847][    T9] msm_geni_serial 98c000.qcom,qup_uart: Serial port: 0 added.FifoSize: 64 is_console: 0
[    6.378444][    T9] msm_geni_serial 98c000.qcom,qup_uart: gsi_mode:0
[    6.384997][    T9] 98c000.qcom,qup_uart: ttyHS0 at MMIO 0x98c000 (irq = 121, base_baud = 0) is a MSM
[    6.395929][    T9] spi_geni 99c000.spi: Property qcom,vote-index not found or invalid
[    6.405466][    T9] fb_gc9307c spi0.0: fbtft_property_value: width = 240
[    6.412404][    T9] fb_gc9307c spi0.0: fbtft_property_value: height = 320
[    6.419402][    T9] fb_gc9307c spi0.0: fbtft_property_value: buswidth = 8
[    6.426387][    T9] fb_gc9307c spi0.0: fbtft_property_value: rotate = 0
[    6.433192][    T9] fb_gc9307c spi0.0: fbtft_property_value: fps = 120
[    6.441652][    T9] spi_geni 99c000.spi: tx_fifo 16 rx_fifo 32 tx_width 32
[    6.449831][    T9] graphics fb0: fb_gc9307c frame buffer, 240x320, 150 KiB video memory, 4 KiB buffer memory, fps=125, spi0.0 at 50 MHz
[    6.462540][    T9] spi_geni 99c000.spi: spi_geni_probe: completed 0
[    6.471842][    T9] spmi spmi-1: SPMI PMIC arbiter debug bus controller added
[    6.480308][    T9] i2c_geni 980000.i2c: Bus frequency is set to 400000Hz.
[    6.488616][    T9] i2c_geni 980000.i2c: I2C probed
[    6.494279][    T9] i2c_geni 988000.i2c: Bus frequency is set to 400000Hz.
[    6.501494][    T9] i2c_geni 988000.i2c: Multi-EE usecase
[    6.522604][    T9] input: chsc_cap_touch as /devices/platform/soc/9c0000.qcom,qupv3_0_geni_se/988000.i2c/i2c-1/1-002e/input/input0
[    6.535076][    T9] [CHSC] function = semi_touch_reset              , line = 14  : set status before reset tp...
[    6.583363][    T9] [CHSC] function = semi_touch_reset              , line = 25  : set status pointing...
[    6.593813][    T9] [CHSC] function = semi_touch_start_up_check     , line = 463 : retry-0, firmware is not ready
[    6.618700][    T9] [CHSC] function = semi_touch_start_up_check     , line = 463 : retry-1, firmware is not ready
[    6.642701][    T9] [CHSC] function = semi_touch_start_up_check     , line = 463 : retry-2, firmware is not ready
[    6.666698][    T9] [CHSC] function = semi_touch_start_up_check     , line = 463 : retry-3, firmware is not ready
[    6.691115][    T9] [CHSC] function = semi_touch_bootup_update_check, line = 516 : check if firmware need update, product vid_pid = 0x  1d00a302, upd vid_pid = 0x  1d00a302, boot check = 1
[    6.708429][    T9] [CHSC] function = semi_touch_check_cfg_update   , line = 380 : tp vid_pid = 0x  1d00a302, udp vid_pid = 0x  1d00a302
[    6.721107][    T9] [CHSC] function = semi_touch_check_boot_update  , line = 429 : tp boot ver = 0x8069, udp boot ver = 0x8069
[    6.734337][    T9] [CHSC] function = semi_touch_mode_init          , line = 394 : set status pointing...
[    6.750694][    T9] [CHSC] function = semi_touch_resolution_adaption, line = 286 : resolution = (240, 320)
[    6.760982][    T9] [CHSC] function = semi_touch_probe              , line = 600 : probe finished(result:0) driver ver(v4.0.1)
[    6.772851][    T9] i2c i2c-1: of_i2c: modalias failure on /soc/qcom,qupv3_0_geni_se@9c0000/i2c@988000/tavil_codec
[    6.783503][    T9] i2c i2c-1: Failed to create I2C device for /soc/qcom,qupv3_0_geni_se@9c0000/i2c@988000/tavil_codec
[    6.794556][    T9] i2c_geni 988000.i2c: I2C probed
[    6.800209][    T9] i2c_geni 994000.i2c: Bus frequency is set to 400000Hz.
[    7.836410][    T9] sgm41542S-charger 2-006b: start to  init sgm41542s_probe
[    7.843804][    T9] sgm41542S-charger 2-006b: i2c addr6b:
[    7.849767][    T9] [sgm41542S_hw_chipid_detect] Reg[0x0B]=0x54
[    7.855870][    T9] [sgm41542S_hw_chipid_detect]
[    7.860852][    T9] sgm41542s register chg irq success!
[    7.867217][    T9] sgm41542: disable watchdog
[    7.877536][    T9] irq: IRQ153: trimming hierarchy from :soc:interrupt-controller@b220000-9
[    7.886489][    T9] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 153
[    7.955177][    T9] i2c_geni 994000.i2c: I2C probed
[    7.960900][    T9] i2c_geni 998000.i2c: Bus frequency is set to 400000Hz.
[    7.969517][    T9] i2c_geni 998000.i2c: I2C probed
[    7.976725][    T9] coresight-tmc 24048000.tmc: setting tmc etr sw usb buf size 0x4000000
[    7.985541][    T9] sps_register_bam_device: sps:BAM 0x0000000024064000 is registered
[    7.993744][    T9] coresight-tmc 24048000.tmc: setting tmc etr sw pcie buf size 0x800000
[    8.003253][    T9] tmc_etr_usb_init: ETR usb property is not configured!
[    8.011803][    T9] sdc1_emmc_sd_vdd: supplied by sdc1_sd_ls_vccb
[    8.019103][    T9] input: pmic_pwrkey as /devices/platform/soc/c42d000.qcom,spmi/spmi-0/0-00/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300:pwrkey/input/input1
[    8.039078][    T9] input: pmic_resin as /devices/platform/soc/c42d000.qcom,spmi/spmi-0/0-00/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300:resin/input/input2
[    8.059008][    T9] rtc-pm8xxx c42d000.qcom,spmi:qcom,pmk8550@0:rtc@6100: registered as rtc0
[    8.067737][    T9] rtc-pm8xxx c42d000.qcom,spmi:qcom,pmk8550@0:rtc@6100: setting system clock to 1970-01-16T20:15:38 UTC (1368938)
[    8.098792][    T9] spmi-temp-alarm c42d000.qcom,spmi:qcom,pmx75@1:qcom,temp-alarm@a00: failed to register sensor
[    8.109839][    T9] extcon-pm8941-misc c42d000.qcom,spmi:qcom,pmx75@1:qcom,pmd-vbus-det@1500: IRQ usb_id not found
[    8.121263][    T9] spmi spmi-0: pmic_arb_wait_for_done: 0xa 0xa04: transaction failed (0x3)
[    8.129954][    T9] spmi-temp-alarm c42d000.qcom,spmi:qcom,pmg1110@a:qcom,temp-alarm@a00: could not read type
[    8.140155][    T9] spmi-temp-alarm: probe of c42d000.qcom,spmi:qcom,pmg1110@a:qcom,temp-alarm@a00 failed with error -5
[    8.152167][    T9] sdhci_msm 8804000.sdhci: Adding to iommu group 5
[    8.152226][    T1] [ubi_init:1305]mtd_devs 0
[    8.160444][    T9] sdhci_msm 8804000.sdhci: nvmem cell get failed
[    8.163264][    T1] [ubi_init:1317]misc_register ubi_ctrl_cdev
[    8.175810][    T1] [aw35615] Start driver init version V1.7.2
[    8.177312][    T9] sdhci_msm 8804000.sdhci: TCXO clk not present (-2)
[    8.182228][    T1] [aw35615] enter
[    8.188552][    T9] sdhci_msm 8804000.sdhci: Failed to get bus_scale data
[    8.192130][    T1] [aw35615] define AW_HAVE_SNK
[    8.192134][    T1] [aw35615] define AW_HAVE_SRC
[    8.192137][    T1] [aw35615] define AW_HAVE_DRP
[    8.192139][    T1] [aw35615] define AW_HAVE_VBUS_ONLY
[    8.199877][    T9] mmc0: CQHCI version 5.10
[    8.203863][    T1] [aw35615] define AW_HAVE_EXT_MSG
[    8.228143][    T1] [aw35615] define AW_HAVE_VDM
[    8.232896][    T1] [aw35615] define AW_DEBUG_CODE
[    8.237823][    T1] [aw35615] define AW_HAVE_DP
[    8.240077][    T9] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using ADMA 64-bit
[    8.242697][    T1] [aw35615] The port0 (0x22) address matching successful
[    8.251264][    T9] sdhci_msm 8804000.sdhci: mmc0: CQE init: success
[    8.258326][    T1] [aw35615] Device check passed chip id = 0x91 id_ret = 1
[    8.272053][    T1] [aw35615] INT_N GPIO initialized as pin '464'
[    8.278328][    T1] [aw35615] snk_pdo_vol[0] = 5000; snk_pdo_cur[0] = 2000
[    8.285408][    T1] [aw35615] src_pdo_vol[0] = 5000; src_pdo_cur[0] = 1000
[    8.292482][    T1] [aw35615] aw_parse_dts:aw35615,snk_tog_time, val = 54
[    8.299463][    T1] [aw35615] aw_parse_dts:aw35615,snk_tog_time, val = 54
[    8.306444][    T1] [aw35615] aw_parse_dts:aw35615,cc1_ov_th, val = 7
[    8.313069][    T1] [aw35615] aw_parse_dts:aw35615,cc2_ov_th, val = 7
[    8.319697][    T1] [aw35615] aw_parse_dts:aw35615,lpd_tim_set, val = 4
[    8.326558][    T1] aw35615 0-0022: supply vbus not found, using dummy regulator
[    8.334297][    T1] [aw35615::aw_Sysfs_Init::1292 ] -------------chip->gpio_IntN :464
[    8.342342][    T1] [aw35615::aw_Sysfs_Init::1300 ] sys init name:AW35615-B
[    8.349272][   T37] mmc0: Command Queue Engine enabled
[    8.349710][    T1] [aw35615]  AWINIC Driver loaded successfully!
[    8.354791][   T37] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    8.361501][    T1] [aw35615] enter
[    8.368792][   T37] mmcblk0: mmc0:0001 YF3000 7.22 GiB
[    8.371880][    T1] [aw35615] define AW_HAVE_SNK
[    8.371885][    T1] [aw35615] define AW_HAVE_SRC
[    8.379599][   T37]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66
[    8.382010][    T1] [aw35615] define AW_HAVE_DRP
[    8.393066][   T37] mmcblk0boot0: mmc0:0001 YF3000 4.00 MiB
[    8.412516][    T1] [aw35615] define AW_HAVE_VBUS_ONLY
[    8.412522][    T1] [aw35615] define AW_HAVE_EXT_MSG
[    8.412525][    T1] [aw35615] define AW_HAVE_VDM
[    8.412528][    T1] [aw35615] define AW_DEBUG_CODE
[    8.417842][   T37] mmcblk0boot1: mmc0:0001 YF3000 4.00 MiB
[    8.423101][    T1] [aw35615] define AW_HAVE_DP
[    8.423325][    T1] [aw35615] The port0 (0x22) address matching successful
[    8.428904][   T37] mmcblk0rpmb: mmc0:0001 YF3000 4.00 MiB, chardev (500:0)
[    8.433505][    T1] [aw35615] Device check passed chip id = 0x91 id_ret = 1
[    8.433555][    T1] aw35615 3-0022: USB3 switch enable GPIO configured: 389
[    8.482246][    T1] aw35615 3-0022: USB3 switch select GPIO configured: 396, default: 0
[    8.490483][    T1] [aw35615] INT_N GPIO initialized as pin '494'
[    8.496757][    T1] [aw35615] snk_pdo_vol[0] = 5000; snk_pdo_cur[0] = 2000
[    8.503841][    T1] [aw35615] src_pdo_vol[0] = 5000; src_pdo_cur[0] = 1000
[    8.510916][    T1] [aw35615] aw_parse_dts:aw35615,snk_tog_time, val = 54
[    8.517895][    T1] [aw35615] aw_parse_dts:aw35615,snk_tog_time, val = 54
[    8.524875][    T1] [aw35615] aw_parse_dts:aw35615,cc1_ov_th, val = 7
[    8.531502][    T1] [aw35615] aw_parse_dts:aw35615,cc2_ov_th, val = 7
[    8.538133][    T1] [aw35615] aw_parse_dts:aw35615,lpd_tim_set, val = 4
[    8.544979][    T1] aw35615 3-0022: supply vbus not found, using dummy regulator
[    8.552672][    T1] [aw35615::aw35615_init_event_handler::2208 ] init event
13 

[    8.552672][    T1] 
[    8.562217][    T1] [aw35615::aw_Sysfs_Init::1292 ] -------------chip->gpio_IntN :494
[    8.570312][    T1] [aw35615::aw_Sysfs_Init::1300 ] sys init name:AW35615-A
[    8.577749][    T1] [aw35615]  AWINIC Driver loaded successfully!
[    8.584454][    T1] @Harden Qstart_init entry !!!
[    8.584803][    T9] msm-dwc3 a600000.ssusb: IRQ hs_phy_irq not found
[    8.589410][    T1] [QL_LCD/E]ql_lcd_init:enter ql_lcd_init.
[    8.589410][    T1] 
[    8.589443][    T1] SPI driver spi_lcd has no spi_device_id for GC9307C
[    8.596908][    T9] msm-dwc3 a600000.ssusb: Nominal values not found.
[    8.604091][    T1] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.610796][    T9] msm-dwc3 a600000.ssusb: Using default bus votes
[    8.611592][    T9] msm-dwc3 a600000.ssusb: Unable to get vbus regulator err: -19
[    8.617873][    T1] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.628218][   T57] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
[    8.632972][    T1] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    8.640696][   T57] eusb2-repeater c42d000.qcom,spmi:qcom,pmx75@1:qcom,eusb2-repeater@fd00: eUSB2 repeater status:OK
[    8.647784][  T138] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    8.650118][    T1] clk: Disabling unused clocks
[    8.650480][    T1] gcc-sdxpinn 80000.clock-controller: sync-state
[    8.650662][    T1] ALSA device list:
[    8.650682][    T1]   No soundcards found.
[    8.650687][    T1] TAP version 14
[    8.650690][    T1] 1..0
[    8.657066][   T57] QL-DYNAMIC-PROP: read value of [dwc3@a600000:quectel,dynamic-props-pcie:status] failed
[    8.663871][  T138] cfg80211: failed to load regulatory.db
[    8.675110][   T57] dwc3 a600000.dwc3: Adding to iommu group 6
[    8.731480][   T57] eusb2-repeater c42d000.qcom,spmi:qcom,pmx75@1:qcom,eusb2-repeater@fd00: eUSB2 repeater status:OK
[    8.766510][   T57] msm-dwc3 a600000.ssusb: dwc3 msm iommu fault handler registered
[    8.774418][    T1] md: Waiting for all devices to be available before autodetect
[    8.782111][    T1] md: If you don't use raid, use raid=noautodetect
[    8.788645][    T1] md: Autodetecting RAID arrays.
[    8.793581][    T1] md: autorun ...
[    8.797181][    T1] md: ... autorun DONE.
[    8.816661][    T1] EXT4-fs (mmcblk0p57): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    8.827547][    T1] VFS: Mounted root (ext4 filesystem) readonly on device 259:49.
[    8.835786][    T1] Freeing unused kernel memory: 1600K
[    8.844412][    T1] [modem_cfg] filp_open sucessfully 
[    8.849996][    T1] [modem_cfg] read_buf A00101A10101A20101A30101A40101A50101A60100A70101A80101A90101AA0100AB0100AC0100AD0100AE0100AF0100B002008MMQ
[    8.849996][    T1] 
[    8.865867][    T1] [modem_cfg] smem copy length=108 
[    8.871077][    T1] [modem_cfg] smem alloc sucessfully 
[    8.876457][    T1] Run /sbin/init as init process
[    8.881408][    T1]   with arguments:
[    8.881413][    T1]     /sbin/init
[    8.881416][    T1]   with environment:
[    8.881419][    T1]     HOME=/
[    8.881422][    T1]     TERM=linux
[    8.881424][    T1]     ql_overlay_rootfs=1
[    8.881427][    T1]     data_interface=[0,0]
[    8.881431][    T1]     ql_pcie_mode=1
[    8.881433][    T1]     ql_pcie_ssc=0
[    8.881436][    T1]     ql_switch_usb=0
[    8.881439][    T1]     ql_pcie_id=[0x0000,0x0000,0x0000,0x0000,0]
[    8.881441][    T1]     ql_cdt_board_id=0x02010022
[    8.881444][    T1]     ethmac=000000000000000000000000
[    8.881447][    T1]     eipv4=
[    8.881449][    T1]     eipv6=
[    8.881452][    T1]     eqos=
[    8.922524][    T1] init: Console is alive
[    8.996077][  T233] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    9.005812][  T233] gl_sdk4_hw_info: loading out-of-tree module taints kernel.
[    9.017661][  T233] install gl_hw_info
[    9.044430][  T233] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    9.052917][  T233] kmodloader (233) used greatest stack depth: 11888 bytes left
[    9.058510][    T1] init: - preinit -
[    9.145900][  T241] /dev/mmcblk0p59: recovering journal
[    9.227459][  T241] /dev/mmcblk0p59
[    9.227479][  T241]  primary superblock features different from backup
[    9.231104][  T241] , check forced.
[    9.300995][  T241] /dev/mmcblk0p59: 
[    9.301022][  T241] Feature orphan_present is set but orphan file is clean.
[    9.312000][  T241] CLEARED.
[    9.318596][  T241] /dev/mmcblk0p59: 961/196608 files (0.3% non-contiguous), 69778/786432 blocks
[    9.392387][  T242] EXT4-fs (mmcblk0p59): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    9.416715][  T250] mount (250) used greatest stack depth: 11360 bytes left
[    9.643273][  T322] qcom-ethqos ethqos_serdes_power_saving:6645 power saving turned off
[    9.651754][  T322] qcom-ethqos ethqos_enable_power_saving:6789 EMAC = 1 Save Power = 0 ps_refcount = 0->1
[    9.661725][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_phy_soft_reset
[    9.662740][   T37] msm-dwc3 a600000.ssusb: DWC3 in low power mode
[    9.746100][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_init
[    9.761035][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_intr
[    9.770821][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_intr
[    9.780720][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_resume
[    9.789140][  T322] qcom-ethqos 22fc0000.qcom,emac1 eth0: PHY [stmmac_dev1-0:01] driver [RTL8221B-VB-CG 2.5Gbps PHY] (irq=POLL)
[    9.800929][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_intr
[    9.810709][  T322]  qcom-ethqos: stmmac_init_phy config_phy_intr successful after connect
[    9.819213][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: attached PHY driver (mii_bus:phy_addr=stmmac_dev1-0:01, irq=MAC)
[    9.831186][  T322]  qcom-ethqos: stmmac_init_phy early eth setting stmmac init
[    9.838701][  T322]  qcom-ethqos: stmmac_init_phy dev phydev = priv phydev
[    9.846420][  T322] qcom-ethqos 22fc0000.qcom,emac1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-1
[    9.855773][  T322] qcom-ethqos ethqos_serdes_power_up:2009 ethqos_serdes_power_up : speed = 10 interface = 4
[    9.855823][  T322] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1398 qcom_ethqos_serdes_update_sgmii : Serdes Speed set to 1GB speed
[    9.871102][  T322] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1413 qcom_ethqos_serdes_update_sgmii : Exit serdes speed = 1000
[    9.883375][  T322] qcom-ethqos 22fc0000.qcom,emac1 eth0: No Safety Features support found
[    9.903974][  T322] qcom-ethqos 22fc0000.qcom,emac1 eth0: configuring for phy/sgmii link mode
[    9.912767][  T322] qcom-ethqos 22fc0000.qcom,emac1 eth0: phylink_mac_config: mode=phy/sgmii/Unknown/Unknown adv=0000000,00000000,00000000 pause=00 link=0 an=0
[    9.927524][  T322] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_resume
[    9.936049][  T322] qcom-ethqos 22fc0000.qcom,emac1 eth0: OpenAVB will not work, explicitly add VLAN
[    9.945684][   T37] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_aneg,adv=128,ret=0, adver=f
[    9.950679][  T322] qcom-ethqos ethqos_serdes_power_saving:6660 power saving turned on
[    9.964717][  T322] qcom-ethqos ethqos_enable_power_saving:6789 EMAC = 1 Save Power = 1 ps_refcount = 1->0
[    9.974642][  T322] qcom-ethqos 22fc0000.qcom,emac1 eth0: stmmac_open enable power saving
[    9.983666][  T322] ip (322) used greatest stack depth: 9488 bytes left
[   11.512845][  T138] [aw35615::platform_set_pps_voltage::609 ] mv :0
[   11.519308][  T138] [aw35615::aw_driver_ctl_sgm_gpio::595 ] ev: mos2_off
[   11.534090][  T138] [aw35615::aw_driver_ctl_sgm_gpio::600 ] ctrl sgm gpio
[   11.541083][  T138] [aw35615] disable vbus current :0
[   11.541088][  T138] [aw35615] The selected pdo is not supported
[   11.552381][  T138] [aw35615::platform_set_pps_voltage::616 ] otg vbus off
[   11.560752][  T138] [aw35615::handle_core_event::2070 ] CC_NO_ORIENT=0x4
[   11.560752][  T138] 
[   11.569963][  T137] [aw35615::aw35615_report_uevent_work::1700 ] report_event :aw35615-b=cc_none
[   11.569963][  T137] 
[   11.592746][  T138] [aw35615]  Core is initialized!
[   11.597855][  T138] [aw35615]  Success: Requested INT_N IRQ: '159'
[   11.604536][  T138] [aw35615] Core is initialized!
[   11.768925][  T138] [aw35615::platform_set_pps_voltage::609 ] mv :0
[   11.775373][  T138] [aw35615::aw_driver_ctl_sgm_gpio::595 ] ev: mos1_off
[   11.790202][  T138] [aw35615::aw_driver_ctl_sgm_gpio::600 ] ctrl sgm gpio
[   11.797186][  T138] [aw35615] disable vbus current :0
[   11.797191][  T138] [aw35615] The selected pdo is not supported
[   11.808487][  T138] [aw35615::platform_set_pps_voltage::616 ] otg vbus off
[   11.816820][  T138] [aw35615::handle_core_event::2070 ] CC_NO_ORIENT=0x4
[   11.816820][  T138] 
[   11.826156][  T137] [aw35615::aw35615_report_uevent_work::1700 ] report_event :aw35615-a=cc_none
[   11.826156][  T137] 
[   11.848993][  T138] [aw35615]  Core is initialized!
[   11.854125][  T138] [aw35615]  Success: Requested INT_N IRQ: '160'
[   11.860792][  T138] [aw35615] Plug-in typec power-on interrupt detection
[   11.867697][  T138] [aw35615] Core is initialized!
[   11.868059][   T52] [aw35615] Port0 TC_ST=Unattached
[   11.877940][   T52] [aw35615] regStatus1a=  0x6
[   11.882603][   T52] [aw35615::platform_set_pps_voltage::609 ] mv :0
[   11.894267][   T52] [aw35615] Port0 TC_ST=AttachWaitSink
[   12.008187][   T52] [aw35615::platform_set_pps_voltage::609 ] mv :0
[   12.016703][   T52] [aw35615] CC Changed=0x2
[   12.021135][   T52] [aw35615] Set USB3.0 switch to CC2 path
[   12.026875][   T52] aw35615 - stop_usb_host
[   12.031189][   T52] [aw35615] stop_usb_host stop_usb_host
[   12.031194][   T52] [aw35615::start_usb_peripheral::1848 ] enter
[   12.031194][   T52] 
[   12.045165][   T52] [aw35615::start_usb_peripheral::1868 ] insert_count : 0
[   12.045165][   T52] 
[   12.054682][   T52] [aw35615::start_usb_peripheral::1876 ] 
[   12.060440][   T52] msm-dwc3 a600000.ssusb: Could not get usb psy
[   12.066741][   T52] [aw35615::start_usb_peripheral::1882 ] 
[   12.068870][   T57] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
[   12.072482][   T52] [aw35615] start_usb_peripheral
[   12.080492][   T57] eusb2-repeater c42d000.qcom,spmi:qcom,pmx75@1:qcom,eusb2-repeater@fd00: eUSB2 repeater status:OK
[   12.085679][   T37] [aw35615::aw35615_report_uevent_work::1700 ] report_event :aw35615-a=cc2_in
[   12.085679][   T37] 
[   12.108052][   T52] [aw35615] Port0 TC_ST=AttachedSink
[   12.133826][  T236] urandom-seed: Seeding with /etc/urandom.seed
[   12.348065][  T395] qcom-ethqos ethqos_phy_irq_disable:2663 disabling irq = 1
[   12.356219][  T395] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_suspend
[   12.368652][    T1] procd: - early -
[   12.945043][    T1] procd: - ubus (running as root!) -
[   13.003247][    T1] procd: - init -
[   13.042122][   T66] monitor work
[   13.046391][   T66] sgm41542S_dump_register,[0x0]=0x4 
[   13.046596][   T66] sgm41542S_dump_register,[0x1]=0x8a 
[   13.052126][   T66] sgm41542S_dump_register,[0x2]=0x8 
[   13.058000][   T66] sgm41542S_dump_register,[0x3]=0x22 
[   13.063693][   T66] sgm41542S_dump_register,[0x4]=0xb4 
[   13.069495][   T66] sgm41542S_dump_register,[0x5]=0xaf 
[   13.075347][   T66] sgm41542S_dump_register,[0x6]=0x96 
[   13.081165][   T66] sgm41542S_dump_register,[0x7]=0x44 
[   13.087728][   T66] sgm41542S_dump_register,[0x8]=0xa4 
[   13.094955][   T66] sgm41542S_dump_register,[0x9]=0x0 
[   13.100943][   T66] sgm41542S_dump_register,[0xa]=0x83 
[   13.107754][   T66] sgm41542S_dump_register,[0xb]=0x54 
[   13.114767][   T66] sgm41542S_dump_register,[0xc]=0x75 
[   13.120586][   T66] sgm41542S_dump_register,[0xd]=0x0 
[   13.126307][   T66] sgm41542S_dump_register,[0xe]=0x80 
[   13.131890][   T66] sgm41542S_dump_register,[0xf]=0x20 
[   13.137550][   T66] sgm41542S_dump_register,[0x10]=0xda 
[   13.143165][   T66] sgm41542S_dump_register,[0x11]=0xb1 
[   13.148918][   T66] sgm41542S_dump_register,[0x12]=0x4 
[   13.154659][   T66] sgm41542S_dump_register,[0x13]=0x8b 
[   13.160308][   T66] sgm41542S_dump_register,[0x14]=0x8f 
[   13.166018][   T66] sgm41542S_dump_register,[0x15]=0x36 
[   13.171820][   T66] sgm41542S_dump_register,[0x16]=0x32 
[   13.177579][   T66] sgm41542S_dump_register,[0x17]=0x0 
[   13.183359][   T66] sgm41542S_dump_register,[0x18]=0x7 
[   13.188984][   T66] sgm41542S_dump_register,[0x19]=0x0 
[   13.194638][   T66] sgm41542S_dump_register,[0x1a]=0x0 
[   13.201215][   T66] sgm41542S_dump_register,[0x1b]=0x0 
[   13.206869][   T66] sgm41542S_dump_register,[0x1c]=0x0 
[   13.610162][  T680] urngd: v1.0.2 started.
[   14.522762][ T1701] nss_macsec_init done!
[   14.623072][ T1782] Current running slot is :_a
[   15.709697][   T52] [aw35615] pd connect typec only snk
[   15.749504][ T2605] /dev/mmcblk0p60: clean, 13/12824 files, 8396/51200 blocks
[   15.749529][ T2605] 
[   15.777075][ T2618] EXT4-fs (mmcblk0p60): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   15.788404][ T1782] Mount /dev/mmcblk0p60 on /cache successfully!
[   15.813805][ T2667] /dev/mmcblk0p61: clean, 30/3072 files, 2987/12288 blocks
[   15.813831][ T2667] 
[   15.841630][ T2680] EXT4-fs (mmcblk0p61): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
14 
[   15.852938][ T1782] Mount /dev/mmcblk0p61 on /persist successfully!
[   15.879140][ T2727] /dev/mmcblk0p66: clean, 197/92160 files, 59976/368310 blocks
[   15.879165][ T2727]
[   15.928405][ T2741] EXT4-fs (mmcblk0p66): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   15.939732][ T1782] Mount /dev/mmcblk0p66 on /usrdata successfully!
[   15.975803][ T2810] irq: IRQ161: trimming hierarchy from :soc:interrupt-controller@b220000-9
[   16.087035][ T2810] /data/esim_flag exists
[   16.164168][   T52] [aw35615] pd connect typec only snk
[   16.171139][   T52] [aw35615] pd connect typec only snk
[   16.178134][   T52] [aw35615] pd connect typec only snk
[   16.185105][   T52] [aw35615] pd connect typec only snk
[   16.191976][   T52] [aw35615] pd connect typec only snk
[   16.198876][   T52] [aw35615] pd connect typec only snk
[   16.246024][ T2836] ipa:start/load
[   16.272906][ T2989] (NULL device ): msm_gsi_probe:6366 No MSIs configured
[   16.400173][ T3013] ipa get_ipa_dts_configuration:13386 No gunyah-label info
[   16.410935][ T3013] ipa 3e00000.qcom,ipa:ipa_smmu_ap: Adding to iommu group 7
[   16.422538][ T3013] ipa 3e00000.qcom,ipa:ipa_smmu_wlan: Adding to iommu group 8
[   16.431303][ T3013] ipa 3e00000.qcom,ipa:ipa_smmu_uc: Adding to iommu group 9
[   16.440160][ T3013] ipa 3e00000.qcom,ipa:ipa_smmu_wlan1: Adding to iommu group 8
[   16.448848][ T3013] ipa 3e00000.qcom,ipa:ipa_smmu_wlan2: Adding to iommu group 8
[   16.457739][ T3013] ipa 3e00000.qcom,ipa:ipa_smmu_eth: Adding to iommu group 10
[   16.468340][ T3013] ipa 3e00000.qcom,ipa:ipa_smmu_eth1: Adding to iommu group 4
[   16.477177][ T3013] ipa ipa_smmu_update_fw_loader:14868 Using XBL boot load for IPA FW
[   16.485469][ T3013] ipa ipa_smmu_11ad_cb_probe:14574 11AD SMMU is disabled
[   16.487278][ T3013] gsi soc:qcom,msm_gsi: gsi_register_device:1576 GSI irq is wake enabled 35
[   16.507989][ T3013] ipa ipa3_get_smmu_domain_by_type:983 cb_type(5) not valid
[   16.516276][ T3013] ipa-lnx-stats ipa_tlpd_stats_ioctl_init:3771 IPA ipa_lnx_stats_ioctl major(485) initial ok :>>>>
[   16.527382][ T3013] ipa-lnx-stats ipa_tlpd_stats_init:3794 IPA_LNX_STATS_IOCTL init success
[   16.535986][ T3013] IPA driver initialization was successful.
[   16.549143][ T3013] insmod (3013) used greatest stack depth: 9280 bytes left
[   16.562706][ T3079] rmnet_ipa3 started initialization
[   16.567986][ T3079] IPA SSR support = True
[   16.572230][ T3079] IPA SG support = True
[   16.576382][ T3079] IPA Napi Enable = True
[   16.580616][ T3079] using default for wan-rx-desc-size = 256
[   16.587363][ T3079] ipa-wan ipa3_wwan_register_netdev_pm_client:5267 rmnet_ipa%d register done
[   16.596873][ T3079] ipa-wan ipa3_wwan_probe:5504 rmnet_ipa completed initialization
[   16.610350][ T3102] RNDIS_IPA module is loaded.
[   16.619509][ T3113] ecm driver init
[   16.640104][ T3121] IPA clients manager init
[   16.644561][ T3121] ipa_usb driver init
[   16.648769][ T3121] ipa_usb registered successfully
[   16.653824][ T3121] exit: IPA_USB init success!
[   16.658501][ T3121] ipa_wdi3 registered successfully
[   16.663609][ T3121] ipa_gsb registered successfully
[   16.668663][ T3121] ipa_uc_offload registered successfully
[   16.674332][ T3121] ipa_mhi registered successfully
[   16.679368][ T3121] ipa_wigig registered successfully
[   16.684597][ T3121] ipa_eth registered successfully
[   16.689655][ T3121] IPA driver is now in ready state
[   16.694786][ T3121] ipa_qdss registered successfully
[   16.754255][ T3211] ipa ipa_ipsec_fnr_init:2879 decap_no_policy_rt[IPv4] = 17
[   16.761942][ T3211] ipa ipa_ipsec_fnr_init:2879 decap_no_policy_rt[IPv6] = 19
[   16.769305][ T3211] ipa __ipa_add_flt_get_ep_idx:1262 ep not connected ep_idx=13
[   16.854190][ T3291] SMEM MAILBOX:start/load
[   16.861374][ T3296] read_client_info_map: smem qcom_smem_get fail.
[   16.896498][ T3307] tftp-server: start/load...
[   17.108410][ T3528] Mass Storage Function, version: 2009/09/11
[   17.114576][ T3528] LUN: removable file: (no medium)
[   17.114633][ T3529] [guangwei.li] recv uevent ACTION=add SUBSYSTEM=android_usb USB_STATE=
[   17.121318][ T3530] Mass Storage Function, version: 2009/09/11
[   17.134277][ T3530] LUN: removable file: (no medium)
[   17.140832][ T3531] file system registered
[   17.149605][ T3534] f_cdev_alloc: port_name:at_usb0 (00000000510a8de6) portno:(0)
[   17.159201][ T3536] f_cdev_alloc: port_name:at_usb1 (000000008872cd62) portno:(1)
[   17.168736][ T3538] f_cdev_alloc: port_name:at_usb2 (00000000f715a0b1) portno:(2)
[   17.200113][ T3555] gsi_set_inst_name: prot_id = 2, prev inst do not freed yet
[   17.213031][ T3562] using random self ethernet address
[   17.218746][ T3562] using random host ethernet address
[   17.255020][ T3577] using random self ethernet address
[   17.260331][ T3577] using random host ethernet address
[   17.279091][ T3580] using random self ethernet address
[   17.284567][ T3580] using random host ethernet address
[   17.341720][ T3598] Switching to composition Quectel
[   17.373494][ T3605] [quce_flash] quec flash open [rawdata]
[   17.379216][ T3605] [quec_flash] quec flash emmc
[   17.384031][ T3605] [quec_flash] blkpath [/dev/mmcblk0p4]
[   17.409613][ T3613] [j_gadget] symlink = f2, target = ffs.diag, interface_num = 2, interface_count = 1
[   17.420727][ T3614] [j_gadget] symlink = f3, target = gser.0, interface_num = 3, interface_count = 1
[   17.431794][ T3615] [j_gadget] symlink = f4, target = cser.dun.0, interface_num = 4, interface_count = 1
[   17.443082][ T3616] [j_gadget] symlink = f5, target = cser.dun.2, interface_num = 5, interface_count = 1
[   17.454367][ T3617] [j_gadget] symlink = f0, target = gsi.rndis, interface_num = 0, interface_count = 2
[   17.465863][ T3598] [j_gadget] assign id 0 to function gsi.rndis
[   17.472075][ T3598] [j_gadget] assign id 1 to function gsi.rndis
[   17.479799][ T3598] RNDIS_IPA NetDev was initialized
[   17.510188][ T3598] RNDIS_IPA NetDev was cleaned
[   17.522400][ T3598] udc a600000.dwc3: failed to start g1: -19
[   17.632754][ T3727] read descriptors
[   17.636611][ T3727] read strings
[   17.695949][ T3805] capability: warning: `msm-irqbalance' uses 32-bit capabilities (legacy support in use)
[   17.772029][    T9] tz_log_dlkm:[tzdbg_get_tz_version][1755]: tz diag version is 2404000
[   17.780527][    T9] tz_log_dlkm:[tzdbg_query_encrypted_log][1789]: encrypted qseelog enabled is 0
[   17.790274][    T9] tz_log_dlkm:[tzdbg_init_tme_log][1443]: Tme Crashdump address offset need to be defined!
[   17.800037][ T3971] Creating MBIM LICENSE STORE : /persist/data/pfm/licenses/
[   17.801160][    T9] tz_log_dlkm:[tz_log_probe][1911]: Tme log initialization failed!
[   17.906800][ T4026] qbi:MBIM Process Started
[   17.912392][ T4026] qbi: Wakelock support is enabled
[   17.931981][ T4026] qbi:android_mbim node is up for I/O
[   17.956577][ T4152] qce 1de0000.qcedev: Adding to iommu group 11
[   17.969726][ T4152] qcedev_probe_device: No icc avg BW set, using default
[   17.978391][ T4152] qcedev_probe_device: No icc peak BW set, using default
[   17.986184][ T4152] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ
[   17.997992][ T4152] qce 1de0000.qcedev: QTI Crypto 5.7.0 device found @0x1de0000
[   18.000798][ T4207] SFS configuration started.
[   18.005977][ T4152] sps_register_bam_device: sps:BAM 0x0000000001dc4000 is registered
[   18.020397][ T4207] SFS configuration completed.
[   18.020415][ T4152] sps_bam_enable: sps:BAM 0x0000000001dc4000 (va:0x0000000097b24894) enabled: ver:0x28, number of pipes:20
[   18.038567][ T4152] QCE50: qce_sps_init:  QTI MSM CE-BAM at 0x0000000001dc4000 irq 21
[   18.048810][ T4152] qce 1de0000.qcedev:qcom_cedev_ns_cb: Adding to iommu group 11
[   18.072633][ T4274] kmodloader: loading kernel modules from /etc/modules.d/
[   18.100241][ T4274] NET: Registered PF_ALG protocol family
[   18.122997][ T4274] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   18.133184][ T4274] DNS Mark module loaded
[   18.142649][ T4274] OpenVPN data channel offload (ovpn-dco) 2.0.0 -- (C) 2020- OpenVPN, Inc.
[   18.174929][ T4274] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   18.223665][ T4274] ntfs3: Enabled Linux POSIX ACLs support
[   18.251176][ T4274] usbcore: registered new interface driver ax_usb_nic
[   18.259929][ T4274] can: broadcast manager protocol
[   18.266846][ T4274] CAN device driver interface
[   18.272929][ T4274] can: netlink gateway - max_hops=1
[   18.279859][ T4274] can: raw protocol
[   18.285772][ T4274] usbcore: registered new interface driver cdc_wdm
[   18.293806][ T4274] usbcore: registered new interface driver ipheth
[   18.318176][ T4274] usbcore: registered new device driver r8152-cfgselector
[   18.325463][ T4274] usbcore: registered new interface driver r8152
[   18.338639][ T4274] usbcore: registered new device driver r8157-cfgselector
[   18.346159][ T4274] usbcore: registered new interface driver r8157
[   18.367659][ T4274] usbcore: registered new interface driver cdc_ether
[   18.376860][ T4274] usbcore: registered new interface driver cdc_ncm
[   18.386795][ T4274] usbcore: registered new interface driver huawei_cdc_ncm
[   18.396217][ T4274] usbcore: registered new interface driver qmi_wwan
[   18.406635][ T4274] usbcore: registered new interface driver rndis_host
[   18.418660][ T4274] usbcore: registered new interface driver option
[   18.425465][ T4274] usbserial: USB Serial support registered for GSM modem (1-port)
[   18.434544][ T4274] kmodloader: done loading kernel modules from /etc/modules.d/*
[   19.044435][ T4906] Creating QWES LICENSE STORE : /persist/data/pfm/licenses/
[   19.060349][ T4920] Creating qwes_ipc
[   19.600081][ T5456] rmnet_eth: Unknown symbol rmnet_module_hook_register (err -2)
[   19.607893][ T5456] rmnet_eth: Unknown symbol rmnet_module_hook_unregister_no_sync (err -2)
[   19.616650][ T5456] rmnet_eth: Unknown symbol rmnet_is_real_dev_registered (err -2)
[   20.065107][ T5918] pcie-diag is invoked
[   20.149024][ T6021] /dev/at_usb0--1-/dev/at_mdm0--1
[   20.149963][ T6046] r8125:start/load
[   20.153595][ T6052] [murphy]:args :0
[   20.185125][ T6077] rtl8251:start/load
[   20.207413][ T6088] rtl8367:start/load
[   20.315917][ T6160] wlan cnss:start/load
[   20.332316][ T6192] CLD80211: Initializing
[   20.337595][ T6160] irq: IRQ163: trimming hierarchy from :soc:interrupt-controller@b220000-9
[   20.866708][  T225] cnss_plat: CNSS Platform IPC QMI Service is started
[   20.909926][ T6372] cnss_utils: cnss_utils: device type:0
[   20.915627][ T6372] cnss_utils: cnss_utils: set device type:0
[   20.921616][ T6372] cnss_prealloc: assign cnss pool for device id 0x1107
[   20.921747][ T6372] cnss_prealloc: created mempool cnss-pool-8k of min size 16 * 8192
[   20.936937][ T6372] cnss_prealloc: created mempool cnss-pool-16k of min size 16 * 16384
[   20.945456][ T6372] cnss_prealloc: created mempool cnss-pool-32k of min size 22 * 32768
[   20.954359][ T6372] cnss_prealloc: created mempool cnss-pool-64k of min size 38 * 65536
[   20.963007][ T6372] cnss_prealloc: created mempool cnss-pool-128k of min size 10 * 131072
[   20.981220][ T6372] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   20.992555][ T6372] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202
[   21.002766][ T6372] pcie_phy_init: PCIe RC0 PHY is ready!
[   21.018406][ T6372] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   21.042410][ T6372] msm_pcie_link_train: PCIe RC0 link initialized
[   21.048966][ T6372] pci-msm 1bf0000.qcom,pcie: host bridge /soc/qcom,pcie@1bf0000 ranges:
[   21.057398][ T6372] pci-msm 1bf0000.qcom,pcie:   No bus range found for /soc/qcom,pcie@1bf0000, using [bus 00-ff]
[   21.067971][ T6372] pci-msm 1bf0000.qcom,pcie:       IO 0x0048200000..0x00482fffff -> 0x0048200000
[   21.077200][ T6372] pci-msm 1bf0000.qcom,pcie:      MEM 0x0048300000..0x004bffffff -> 0x0048300000
[   21.086529][ T6372] pci-msm 1bf0000.qcom,pcie: MSI: synopsys controller is present
[   21.094696][ T6372] QL-DYNAMIC-PROP: device[qcom,pcie@1bf0000] property[status] changed [string:okay]
[   21.094823][ T6372] pci-msm 1bf0000.qcom,pcie: PCI host bridge to bus 0000:00
[   21.111689][ T6372] pci_bus 0000:00: root bus resource [bus 00-ff]
[   21.118087][ T6372] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0x48200000-0x482fffff])
[   21.128661][ T6372] pci_bus 0000:00: root bus resource [mem 0x48300000-0x4bffffff]
[   21.136587][ T6372] pci 0000:00:00.0: [17cb:0309] type 01 class 0x060400
[   21.143530][ T6372] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[   21.150732][ T6372] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[   21.158256][ T6372] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[   21.182696][ T6372] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   21.192327][ T6372] pci 0000:01:00.0: [17cb:1107] type 00 class 0x028000
[   21.199379][ T6372] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[   21.207546][ T6372] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[   21.233470][ T6372] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   21.241079][ T6372] pci 0000:00:00.0: BAR 14: assigned [mem 0x48400000-0x485fffff]
[   21.248908][ T6372] pci 0000:00:00.0: BAR 15: assigned [mem 0x48600000-0x487fffff 64bit pref]
[   21.257705][ T6372] pci 0000:00:00.0: BAR 1: assigned [mem 0x48300000-0x4830ffff]
[   21.265433][ T6372] pci 0000:00:00.0: BAR 0: assigned [mem 0x48310000-0x48310fff]
[   21.273158][ T6372] pci 0000:00:00.0: BAR 13: assigned [io  0x1000-0x1fff]
[   21.280263][ T6372] pci 0000:01:00.0: BAR 0: assigned [mem 0x48400000-0x485fffff 64bit]
[   21.288583][ T6372] pci 0000:00:00.0: PCI bridge to [bus 01]
[   21.294437][ T6372] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
[   21.301454][ T6372] pci 0000:00:00.0:   bridge window [mem 0x48400000-0x485fffff]
[   21.309180][ T6372] pci 0000:00:00.0:   bridge window [mem 0x48600000-0x487fffff 64bit pref]
[   21.317918][ T6372] pci 0000:00:00.0: Max Payload Size set to  128/ 256 (was  128), Max Read Rq 4096
[   21.327358][ T6372] pci 0000:01:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  512
[   21.337871][   T65] msm_pcie_enumerate: PCIe: RC0: has already been enumerated.
[   21.338292][ T6372] cnss_pci 0000:01:00.0: Adding to iommu group 12
[   21.353704][ T6372] cnss_pci 0000:01:00.0: assigned reserved memory node cnss_wlan_region
[   21.362203][ T6372] cnss_pci 0000:01:00.0: BAR 0: assigned [mem 0x48400000-0x485fffff 64bit]
[   21.370957][ T6372] pci 0000:00:00.0: enabling device (0006 -> 0007)
15 
[   21.377610][ T6372] cnss_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   21.506138][ T6372] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   21.514788][ T6372] cnss: Platform driver probed successfully.
[   21.526341][ T6160] done loading wlan cnss modules
[   22.085613][ T7123] Starting/Loading bluetooth modules
[   22.099586][ T7134] bt_dt_parse_vreg_info: qcom,bt-vdd-rfacmn is not provided in device tree
[   22.108874][ T7134] bt_dt_parse_vreg_info: qcom,bt-vdd-ipa-2p2 is not provided in device tree
[   22.117971][ T7134] bt-debug-gpio not provided in devicetree
[   22.123943][ T7134] xo-clk-gpio not provided in devicetree
[   22.129719][ T7134] bt_dt_parse_clk_info: clocks is not provided in device tree
[   22.137292][ T7134] bt_power_populate_dt_pinfo: clock not provided in device tree
[   22.145290][ T7134] PDC Init table configured
[   22.149853][ T7134] btpower_aop_mbox_init: vreg for iPA not configured
[   22.159665][ T7123] insmod extra btpower.ko Done
[   22.164499][ T7123] done loading bluetooth module
[   23.787672][ T7645] wlan: Loading driver v5.2.1.110D; cld:; cmn:; dev:wlan
[   23.801249][    T9] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   23.812373][    T9] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202
[   23.822571][    T9] pcie_phy_init: PCIe RC0 PHY is ready!
[   23.838223][    T9] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   23.862270][    T9] msm_pcie_link_train: PCIe RC0 link initialized
[   24.410293][ T7645] wlan_hdd_state wlan major(478) initialized
[   24.419448][    T9] cnss: QMI WLFW service connected, state: 0x4c00011
[   24.456215][    T9] cnss: serial id  0x0 0xacb4b404
[   24.514383][    T9] cnss: Host BDF config: HW_XPA: 1 CalDB: 0
[   24.543244][    T9] cnss: DMS QMI connection not established
[   24.620652][    T9] wlan_pld:pld_is_ipa_offload_disabled:2812:: Not supported on type 0
[   24.629224][    T9] cnss: CNSS and IPA do not share IOMMU group
[   24.629319][    T9] [kworke][0x226186a2][15:30:38.224804] wlan: [9:E:QDF] __cds_get_context: Module ID 53 context is Null (via wlan_mlme_set_epcs_capability)
[   24.650006][    T9] [kworke][0x22679612][15:30:38.245490] wlan: [9:I:PMO] wlan_pmo_init_cfg: ipa is enabled and hence disable sap/go d3 wow
[   24.662891][    T9] [kworke][0x226b5c75][15:30:38.258375] wlan: [9:E:POLICY_MGR] policy_mgr_init_cfg: max_conc_cxns 6 non-nan
[   24.674733][    T9] [kworke][0x226ed49d][15:30:38.270217] wlan: [9:E:QDF] __cds_get_context: Module ID 66 context is Null (via hdd_update_ol_config)
[   24.688770][    T9] [kworke][0x2272f156][15:30:38.284253] wlan: [9:E:QDF] __cds_get_context: Module ID 66 context is Null (via cds_open)
[   24.702322][    T9] [kworke][0x2276e9c3][15:30:38.297806] wlan: [9:I:QDF] wlan_son_register_rx_ops:
[   24.702322][    T9] ***** SON MODULE NOT LOADED *****
[   24.702322][    T9]
[   24.719591][    T9] [kworke][0x227bf8cd][15:30:38.315073] wlan: [9:I:WMA] wma_open: WMA --> wmi_unified_attach - success
[   24.733406][    T9] [kworke][0x228004d1][15:30:38.328887] wlan: [9:E:QDF] htc_wait_target: Target Ready! TX resource : 1 size:2176, MaxMsgsPerHTCBundle = 1
[   24.747741][    T9] [kworke][0x22843820][15:30:38.343224] wlan: [9:E:QDF] htc_setup_target_buffer_assignments: SVS Index : 1 TX : 0x100 : alloc:1
[   24.774864][    T9] [kworke][0x228c2a6a][15:30:38.370348] wlan: [9:I:scan] scm_channel_list_db_init: min_freq 5935 max_freq 7115
[   24.786820][    T9] [kworke][0x228fab36][15:30:38.382305] wlan: [9:I:SPECTRAL] wlan_spectral_psoc_open: Spectral feature is disabled
[   24.808966][   T57] [kworke][0x22962821][15:30:38.404451] wlan: [57:I:WMA] wma_rx_service_ready_event: Firmware build version : 201501a6
[   24.821620][   T57] [kworke][0x2299dd1e][15:30:38.417104] wlan: [57:I:WMA] wma_rx_service_ready_event: Board id: 0, Board version: 8 0 0 0 1
[   24.836179][   T57] [kworke][0x229e211f][15:30:38.431664] wlan: [57:E:WMA] wma_update_supported_bands: wrong supported band
[   24.847658][   T57] [kworke][0x22a17e01][15:30:38.443142] wlan: [57:E:WMA] wma_update_supported_bands: wrong supported band
[   24.859192][   T57] [kworke][0x22a4df10][15:30:38.454677] wlan: [57:I:POLICY_MGR] policy_mgr_modify_sbs_freq: Invalid SBS range with all 5Ghz shared
[   24.873063][   T57] [kworke][0x22a8ef66][15:30:38.468548] wlan: [57:I:WMI] extract_hw_bdf_status: BDF VER is 0, FW and BDF ver check skipped
[   24.886096][   T57] [kworke][0x22acc0e5][15:30:38.481581] wlan: [57:E:TIF] get_sar_flag: failed to parse sar flag
[   24.897416][   T57] [kworke][0x22b011e9][15:30:38.492901] wlan: [57:E:TIF] tgt_if_set_reg_afc_configure: service afc support not enable
[   25.021177][   T57] [kworke][0x22d453e6][15:30:38.616661] wlan: [57:I:WMI] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   25.033948][   T57] [kworke][0x22d811c1][15:30:38.629432] wlan: [57:E:QDF] __cds_get_context: Module ID 65 context is Null (via wma_set_tx_partition_base)
[   25.048158][   T57] [kworke][0x22dc3b85][15:30:38.643643] wlan: [57:F:DP] cdp_ipa_set_uc_tx_partition_base invalid instance
[   25.060846][   T57] [kworke][0x22dff308][15:30:38.656330] wlan: [57:E:REGULATORY] reg_set_keep_6ghz_sta_cli_connection: pdev reg component is NULL
[   25.074389][   T57] [kworke][0x22e3ea2f][15:30:38.669865] wlan: [57:E:REGULATORY] reg_is_afc_power_event_received: pdev reg component is NULL
[   25.087480][   T57] [kworke][0x22e7c0aa][15:30:38.682964] wlan: [57:I:REGULATORY] reg_append_mas_chan_list_for_6g_vlp: No VLP reg rules
[   25.100205][   T57] [kworke][0x22eb7af2][15:30:38.695688] wlan: [57:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   25.114757][   T57] [kworke][0x22efbe85][15:30:38.710243] wlan: [57:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   25.129320][   T57] [kworke][0x22f402b4][15:30:38.724805] wlan: [57:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   25.145315][   T57] [kworke][0x22f8b234][15:30:38.740799] wlan: [57:E:REGULATORY] reg_send_scheduler_msg_nb: hlos not initialized
[   25.157329][   T57] [kworke][0x22fc3762][15:30:38.752814] wlan: [57:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: dfs_bangradar_320_support 0
[   25.172533][   T57] [kworke][0x2300ab98][15:30:38.768017] wlan: [57:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_set_nol_subchannel_marking: NOL subchannel marking is disabled
[   25.187845][   T57] [kworke][0x230527f0][15:30:38.783328] wlan: [57:I:SPECTRAL] wlan_spectral_pdev_obj_create_handler: Spectral feature is disabled
[   25.201495][   T57] [kworke][0x230927ab][15:30:38.796978] wlan: [57:I:GREEN_AP] wlan_green_ap_pdev_obj_create_notification: Green AP creation successful, green ap ctx: 00000000879bbf41, pdev: 0000000026e9b8e0
[   25.220855][   T57] [kworke][0x230ed3bf][15:30:38.816339] wlan: [57:I:REGULATORY] reg_set_band: same band 7
[   25.230901][   T57] [kworke][0x2311c539][15:30:38.826385] wlan: [57:I:HDD] hdd_intersect_igmp_offload_setting: fw cap to handle igmp 1 igmp_offload_enable ini 0
[   25.245928][   T57] [kworke][0x23162c4b][15:30:38.841413] wlan: [57:I:GREEN_AP] target_if_green_ap_register_egap_event_handler: Set the Enhance Green AP event handler
[   25.261366][    T9] [kworke][0x231ab1e8][15:30:38.856848] wlan: [9:I:WMA] wma_wait_for_ready_event: FW ready event received
[   25.273226][    T9] [kworke][0x231e2b89][15:30:38.868710] wlan: [9:I:SPECTRAL] spectral_pdev_open: Spectral feature is disabled
[   25.285679][    T9] [kworke][0x2321d19d][15:30:38.881164] wlan: [9:I:IPA] ipa_register_is_ipa_ready: IPA is ready, invoke callback
[   25.298000][    T9] [kworke][0x23256da4][15:30:38.893484] wlan: [9:I:IPA] ipa_register_ready_cb: IPA ready callback invoked: ipa_register_ready_cb
[   25.311805][    T9] ipa ipa3_uc_state_check:752 uC is not loaded
[   25.318329][    T9] [kworke][0x232b6220][15:30:38.913811] wlan: [9:I:IPA] wlan_ipa_wdi_init: ipa_over_gsi: 1, is_smmu_enabled: 1, handle: 0
[   25.331486][    T9] [kworke][0x232f3cf4][15:30:38.926969] wlan: [9:I:IPA] wlan_ipa_wdi_init: IPA uc not ready
[   25.341934][    T9] [kworke][0x23324cbd][15:30:38.937419] wlan: [9:I:IPA] ipa_register_ready_cb: No. of instances added for IPA is 1
[   25.354408][    T9] [kworke][0x2335f457][15:30:38.949894] wlan: [9:I:SPECTRAL] wlan_register_spectral_wmi_ops: Spectral feature is disabled
[   25.367679][    T9] [kworke][0x2339d798][15:30:38.963164] wlan: [9:I:SYS] Creating periodic timer for OLBC UPDATE CACHE TIMEOUT
[   25.367679][    T9]
[   25.382173][    T9] [kworke][0x233e16a6][15:30:38.977658] wlan: [9:I:SPECTRAL] spectral_register_legacy_cb: Spectral feature is disabled
[   25.396401][    T9] [kworke][0x234241ae][15:30:38.991885] wlan: [9:I:DIRECT_BUF_RX] target_if_direct_buf_rx_register_events: DBR Handler Context 1
[   25.410302][    T9] [kworke][0x2346545d][15:30:39.005787] wlan: [9:I:SPECTRAL] wlan_spectral_psoc_enable: Spectral feature is disabled
[   25.427395][    T9] [kworke][0x234b563a][15:30:39.022879] wlan: [9:I:SME] sme_set_auto_shutdown_cb: Plug in Auto shutdown event callback
[   25.446999][    T9] [kworke][0x2351148b][15:30:39.042483] wlan: [9:I:HDD] ql_get_mac_addr: Got  mac addres
 from RAWDATA
[   25.450034][ T7765] [kworke][0x2351f836][15:30:39.045518] wlan: [7765:E:REGULATORY] reg_run_11d_state_machine: Invalid vdev
[   25.458287][    T9] cnss_utils: WLAN MAC address is not set, type 0
[   25.458311][    T9] [kworke][0x23546513][15:30:39.053797] wlan: [9:I:HDD] hdd_initialize_mac_address: using default MAC address
[   25.470008][ T7765] [kworke][0x2357d226][15:30:39.065491] wlan: [7765:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   25.479661][    T9] cnss: Failed to get cooling device node
[   25.488621][ T7765] [kworke][0x235d44e1][15:30:39.084087] wlan: [7765:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   25.523440][ T7765] [kworke][0x2367799c][15:30:39.118924] wlan: [7765:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   25.533893][ T7858] [ifconf][0x236a899a][15:30:39.129377] wlan: [7858:E:MLO_MGR] mlo_mgr_ml_peer_exist_on_diff_ml_ctx: MLD ID 0 exists with mac 00:03:7f:::25
[   25.747762][ T7964] [iw][0x23a931ca][15:30:39.343246] wlan: [7964:E:SON] wlan_son_cbs_disable: vdev null
[   25.758596][ T7701] [schedu][0x23ac5e51][15:30:39.354080] wlan: [7701:E:DP] dp_tx_flow_pool_unmap_handler: flow pool id: 0 is inactive, ignore unmap
[   25.787685][ T7964] [iw][0x23b4e3ec][15:30:39.383168] wlan: [7964:I:HDD] vdev 0 destroyed successfully
[   25.797498][ T7964] [iw][0x23b7c3fc][15:30:39.392982] wlan: [7964:E:HDD] wlan_hdd_is_mlo_connection: invalid vdev
[   25.808552][ T7964] [iw][0x23bb011a][15:30:39.404037] wlan: [7964:E:SON] wlan_son_cbs_disable: vdev null
[   25.819581][ T7701] [schedu][0x23be3bff][15:30:39.415063] wlan: [7701:E:WMA] Peer 00:03:7f:::25 not found
[   25.829850][ T7701] [schedu][0x23c13e71][15:30:39.425335] wlan: [7701:E:DP] dp_tx_flow_pool_unmap_handler: flow pool id: 1 is inactive, ignore unmap
[   25.856549][ T7964] [iw][0x23c910ba][15:30:39.452032] wlan: [7964:I:HDD] vdev 1 destroyed successfully
[   26.095651][ T8115] [iwpriv][0x240f1d78][15:30:39.691135] wlan: [8115:E:HDD] __iw_softap_setparam: ifname:wlan1,adapter->band:2
[   26.117481][ T8131] [ifconf][0x241582a9][15:30:39.712964] wlan: [8131:E:SON] wlan_son_cbs_disable: vdev null
[   26.128257][ T7701] [schedu][0x2418aaeb][15:30:39.723741] wlan: [7701:E:DP] dp_tx_flow_pool_unmap_handler: flow pool id: 1 is inactive, ignore unmap
[   26.142134][ T7701] [schedu][0x241cbbb0][15:30:39.737618] wlan: [7701:E:MLO_MGR] wlan_mlo_vdev_aid_mgr_deinit: ID 0, doesn't have associated AID mgr
[   26.155816][ T7701] [schedu][0x2420bde1][15:30:39.751301] wlan: [7701:E:MLO_MGR] wlan_mlo_vdev_aid_mgr_deinit: ID 1, doesn't have associated AID mgr
[   26.176160][    C0] [soft_i][0x2426b3a0][15:30:39.771644] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 0 ranges
[   26.190026][    C0] [soft_i][0x242ac394][15:30:39.785510] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 0
[   26.201447][    C0] [soft_i][0x242e1c34][15:30:39.796932] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   26.215857][    C0] [soft_i][0x243254f2][15:30:39.811342] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   26.230267][    C0] [soft_i][0x24368db8][15:30:39.825752] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   26.246647][ T8131] [ifconf][0x243b5a14][15:30:39.842130] wlan: [8131:I:HDD] vdev 1 destroyed successfully
[   26.256670][ T8131] [ifconf][0x243e49ec][15:30:39.852155] wlan: [8131:E:SAP] sap_clear_session_param: Set sapCtxList null for session 1
[   26.273558][ T8139] [ifconf][0x24433c76][15:30:39.869042] wlan: [8139:E:DP] dp_get_vdev_priv_obj: vdev is null
[   26.428411][ T8192] hostapd-daemon: restart
[   26.437829][ T8192] hostapd-daemon: stop wlan1
[   26.442613][ T8192] hostapd-daemon: delete hostapd.wlan1
[   26.449914][ T8211] uci: Entry not found
[   26.459840][ T8214] { "name": "hostapd-daemon.init", "instance": "wlan1" }
[   26.472481][ T8217] Command failed: ubus call
[   26.472505][ T8217] service
[   26.477121][ T8217] delete
[   26.480113][ T8217] { "name": "hostapd-daemon.init", "instance": "wlan1" }
[   26.483028][ T8217] (Not found)
[   26.499811][ T8192] hostapd-daemon: start on wlan1
[   26.522525][ T8192] hostapd-daemon: store log in /data/vendor/wifi/hostapd-wlan1.log
[   26.532677][ T8192] The ctrl_interface_folder is
[   26.543116][ T8192] hostapd-daemon: triggers
[   26.559490][ T8192] hostapd-daemon: add interface trigger for wlan1
[   26.571201][ T8237] { "name": "hostapd-daemon.init", "script": "/etc/init.d/hostapd-daemon.init", "instances": { "wlan1": { "command": [ "/usr/sbin/hostapd", "-P", "/data/vendor/wifi/hostapd-wlan1.pid", "-f", "/data/vendor/wifi/hostapd-wlan1.log", "-d", "/data/vendor/wifi/hostapd-wlan1.conf" ], "file": [ "/etc/config/hostapd" ], "pidfile": "/data/vendor/wifi/hostapd-wlan1.pid", "stdout": true, "stderr": true, "jail": { "name": "wlan1", "mount": { } }, "user": "wifi", "group": "wifi", "capabilities": "/etc/capabilities/hostapd-daemon.json", "no_new_privs": true } }, "triggers": [ [ "config.change", [ "if", [ "eq", "package", "hostapd" ], [ "run_script", "/etc/init.d/hostapd-daemon.init", "reload" ] ], 1000 ], [ "interface.down", [ "if", [ "eq", "interface", "wlan1" ], [ "run_script", "/etc/init.d/hostapd-daemon.init", "stop", "wlan1", "ifdown" ] ], 1000 ] ], "data": { } }
[   26.718155][ T8245] [hostap][0x24c57d38][15:30:40.313639] wlan: [8245:I:HDD] ACS request vid 1 hw mode 2
[   26.993272][ T8327] CDI: Init func for CDI
[   26.997794][ T7701] [schedu][0x25176a2a][15:30:40.593278] wlan: [7701:I:HDD] Vdev 1 ACS Completed freq 5240 BW 2 flag 0x1 ACS in progress 1
[   27.014052][ T8332] QCMAP:Fusion Found
[   27.015313][   T65] [kworke][0x251c8bdb][15:30:40.610794] wlan: [65:E:HDD] wlan_hdd_cfg80211_scan_block: Vendor scan aborted. Null result sent
[   27.031341][   T65] [kworke][0x25213e26][15:30:40.626824] wlan: [65:I:HDD] hdd_vendor_scan_callback: scan complete event sent to NL
[   27.045359][ T8334] netlink: 8 bytes leftover after parsing attributes in process QCMAP_Connectio'. [   27.056657][ T8343] QCMAP:Netlink Query to Kernel Success [   27.115574][ T8245] [hostap][0x2539ebad][15:30:40.711058] wlan: [8245:E:HDD] hdd_config_power: power attr and opm attr is null [   27.128572][ T8245] [hostap][0x253dba77][15:30:40.724055] wlan: [8245:I:HDD] wlan1(vdevid-1): START AP: mode SAP(1) 5240 bw 3 (5MHz 0 10MHz 0) [   27.142198][ T8245] [hostap][0x2541b884][15:30:40.737683] wlan: [8245:W:SME] csr_save_to_channel_power2_g_5_g: Invalid Channel freq 5955 Present in Country IE [   27.160489][ T8245] [hostap][0x2547144d][15:30:40.755973] wlan: [8245:W:DP] dp_txrx_set_vdev_param_be: invalid param 11 [   27.161019][    T9] [kworke][0x25473c15][15:30:40.756503] wlan: [9:E:OSIF] osif_twt_enable_complete_cb: obsolete request [   27.171741][ T8245] [hostap][0x254a6034][15:30:40.767225] wlan: [8245:W:SME] csr_save_to_channel_power2_g_5_g: Invalid Channel freq 5955 Present in Country IE [   27.176216][ T5359] netlink: 4 bytes leftover after parsing attributes in process QCMAP_Connectio'.
[   27.183355][    T9] [kworke][0x254dc743][15:30:40.778839] wlan: [9:E:OSIF] osif_twt_enable_complete_cb: obsolete request
[   27.198477][ T7701] [schedu][0x2552356a][15:30:40.793961] wlan: [7701:E:OBJMGR] wlan_vdev_get_bss_peer_mld_mac: not able to find bss peer for vdev 1
[   27.231971][ T7701] [schedu][0x255c0579][15:30:40.827455] wlan: [7701:E:MLO_MGR] mlo_mgr_ml_peer_exist_on_diff_ml_ctx: MLD ID 0 exists with mac ae:7f:99:::b4
[   27.247261][ T7701] [schedu][0x2560802e][15:30:40.842745] wlan: [7701:E:DP] dp_peer_setup_be: Unable to dp peer setup
[   27.258525][ T7701] [schedu][0x2563cd11][15:30:40.854010] wlan: [7701:I:WMI] vdev_start_add_mlo_params: mlo_flags 0x0 emlsr_support 0 link id 0x0
[   27.271940][ T7701] [schedu][0x2567bb2d][15:30:40.867425] wlan: [7701:I:WMI] send_vdev_start_cmd_tlv: vdev_id 1 freq 5240 chanmode 26 ch_info: 0x1a is_dfs 0 beacon interval 100 dtim 1 center_chan 5210 center_freq2 0 reg_info_1: 0x170000 reg_info_2: 0x1700, req->max_txpow: 0x17 Tx SS 2, Rx SS 2, ldpc_rx: 0, cac 0, regd 2, HE ops: 16793584req->dis_hw_ack: 0 target_tsf_us_lo 0l target_tsf_us_hi 0l
[   27.307767][ T7701] [schedu][0x25723a37][15:30:40.903252] wlan: [7701:I:WMI] vdev_start_cmd_fill_11be: EHT ops: 0 puncture_bitmap 0 wmi cmd puncture bitmap ffffffff
[   27.520762][ T7701] [schedu][0x25b0a0c9][15:30:41.116246] wlan: [7701:E:CMN_MLME] mlme_sr_update: Spatial Reuse disabled for vdev_id: 1
[   27.533468][ T7701] [schedu][0x25b459cd][15:30:41.128953] wlan: [7701:I:HDD] AP started vid 1 freq 5240 BW 2
[   27.543724][ T7701] [schedu][0x25b75aff][15:30:41.139209] wlan: [7701:E:HDD] hdd_son_deliver_peer_authorize_event: ALD ASSOCIATED Event failed forae:7f:99:::b4
[   27.558786][ T7701] [schedu][0x25bbc4ab][15:30:41.154271] wlan: [7701:E:TWT] wlan_twt_init_context: Peer object not found ff:ff:ff:::ff
[   27.571698][ T7701] [schedu][0x25bf8d0d][15:30:41.167183] wlan: [7701:E:IPA] wlan_ipa_setup_iface: net:00000000b63de7bf mode:1 MAC:ae:7f:99:::b4 id:1
[   27.585827][ T7701] [schedu][0x25c3b0b8][15:30:41.181312] wlan: [7701:I:IPA] wlan_ipa_uc_offload_enable_disable: offload_type=0, session_id=1, enable=1
[   27.600135][ T7701] [schedu][0x25c7e1bf][15:30:41.195619] wlan: [7701:E:WMA] wma_tbttoffset_update_event_handler: Update beacon template for vdev 1 due to TBTT offset update
[   27.600179][ T8245] [hostap][0x25c7e51a][15:30:41.195664] wlan: [8245:I:IPA] wlan_ipa_set_perf_level_bw: current bw level 0
[   27.629740][ T7765] [kworke][0x25d08e1e][15:30:41.225224] wlan: [7765:E:OSIF] osif_twt_enable_complete_cb: obsolete request
[   27.630023][ T8365] QCMAP:Netlink Query to Kernel Success
[   27.641709][ T7765] [kworke][0x25d40fd3][15:30:41.237193] wlan: [7765:E:OSIF] osif_twt_enable_complete_cb: obsolete request
[   27.660371][ T8245] [hostap][0x25d98467][15:30:41.255814] wlan: [8245:W:DP] dp_txrx_set_vdev_param_be: invalid param 8
[   27.675596][ T7701] [schedu][0x25ddfd54][15:30:41.271080] wlan: [7701:E:HDD] hdd_son_deliver_peer_authorize_event: ALD ASSOCIATED Event failed forae:7f:99:::b4
[   27.698669][ T7701] [schedu][0x25e4bfbe][15:30:41.294152] wlan: [7701:E:HDD] hdd_son_deliver_peer_authorize_event: ALD ASSOCIATED Event failed forae:7f:99:::b4
[   28.014212][ T8612] afc: start
[   28.501959][ T8404] qcom-ethqos ethqos_serdes_power_saving:6645 power saving turned off
[   28.509403][ T8818] QCMAP: HW Address for dev br-lan: 94:83:c4:cb:47:bc
[   28.510942][ T8404] qcom-ethqos ethqos_enable_power_saving:6789 EMAC = 1 Save Power = 0 ps_refcount = 0->1
[   28.528179][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_phy_soft_reset
[   28.614137][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_init
[   28.626181][  T225] [kworke][0x26f47a27][15:30:42.221651] wlan: [225:W:OSIF] osif_twt_requestor_disable: TWT Requestor disable timedout ret:-110
[   28.631450][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_intr
[   28.651580][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_intr
[   28.661737][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_resume
[   28.670390][ T8404] qcom-ethqos 22fc0000.qcom,emac1 eth0: PHY [stmmac_dev1-0:01] driver [RTL8221B-VB-CG 2.5Gbps PHY] (irq=MAC)
[   28.682230][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_intr
[   28.692038][ T8404]  qcom-ethqos: stmmac_init_phy config_phy_intr successful after connect
[   28.700560][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: attached PHY driver (mii_bus:phy_addr=stmmac_dev1-0:01, irq=MAC)
[   28.712536][ T8404]  qcom-ethqos: stmmac_init_phy early eth setting stmmac init
[   28.720052][ T8404]  qcom-ethqos: stmmac_init_phy dev phydev = priv phydev
[   28.727660][ T8404] qcom-ethqos 22fc0000.qcom,emac1 eth0: Register MEM_TYPE_PAGE_POOL RxQ-1
[   28.737073][ T8404] qcom-ethqos ethqos_serdes_power_up:2009 ethqos_serdes_power_up : speed = 10 interface = 4
[   28.737116][ T8404] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1398 qcom_ethqos_serdes_update_sgmii : Serdes Speed set to 1GB speed
[   28.751984][ T8404] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1413 qcom_ethqos_serdes_update_sgmii : Exit serdes speed = 1000
[   28.764317][ T8404] qcom-ethqos 22fc0000.qcom,emac1 eth0: No Safety Features support found
[   28.784666][ T8404] qcom-ethqos 22fc0000.qcom,emac1 eth0: configuring for phy/sgmii link mode
[   28.793453][ T8404] qcom-ethqos 22fc0000.qcom,emac1 eth0: phylink_mac_config: mode=phy/sgmii/Unknown/Unknown adv=0000000,00000000,00000000 pause=00 link=0 an=0
[   28.808241][ T8404] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_resume
[   28.816673][ T8404] qcom-ethqos ethqos_phy_irq_enable:2627 enabling irq = 0
[   28.823991][ T8404] qcom-ethqos 22fc0000.qcom,emac1 eth0: OpenAVB will not work, explicitly add VLAN
[   28.833516][  T179] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_config_aneg,adv=128,ret=0, adver=f
[   28.842774][ T8404] qcom-ethqos ethqos_serdes_power_saving:6660 power saving turned on
[   28.852670][ T8404] qcom-ethqos ethqos_enable_power_saving:6789 EMAC = 1 Save Power = 1 ps_refcount = 1->0
[   28.862821][ T8404] qcom-ethqos 22fc0000.qcom,emac1 eth0: stmmac_open enable power saving
[   28.873007][ T8404] br-lan: port 1(eth0) entered blocking state
[   28.879257][ T8404] br-lan: port 1(eth0) entered disabled state
[   28.886054][ T8404] device eth0 entered promiscuous mode
[   28.909014][ T8404] br-lan: port 2(wlan1) entered blocking state
[   28.915600][ T8404] br-lan: port 2(wlan1) entered disabled state
[   28.922532][ T8404] device wlan1 entered promiscuous mode
[   28.930055][ T8404] br-lan: port 2(wlan1) entered blocking state
16 
[   28.936319][ T8404] br-lan: port 2(wlan1) entered forwarding state
[   28.969822][ T8969] remoteproc remoteproc0: powering up 4080000.remoteproc-mss
[   28.978931][ T8969] remoteproc remoteproc0: Booting fw image modem.mdt, size 8212
[   29.000643][ T8969] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:6159 IPA received MPSS BEFORE_POWERUP
[   29.011968][ T8969] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:6174 IPA BEFORE_POWERUP handling is complete
[   29.138631][ T9124] QCMAP: HW Address for dev br-lan: 94:83:c4:cb:47:bc
[   29.166881][ T9139] QCMAP: HW Address for dev br-lan: 94:83:c4:cb:47:bc
[   29.173900][ T6052] [murphy]:port_bridge 0 :23
[   29.178874][ T6052] qfile_client_socket_init,sockfd=24
[   29.178874][ T6052]
[   29.187769][ T6052] [murphy] out ops_fd:24
[   29.467376][ T9348] QCMAP: Interface Up for eth0
[   29.595198][ T9454] read descriptors
[   29.599260][ T9454] read strings
[   29.603349][ T9454] [j_gadget] assign id 0 to function gsi.rndis
[   29.612431][ T9454] [j_gadget] assign id 1 to function gsi.rndis
[   29.628012][ T9454] RNDIS_IPA NetDev was initialized
[   29.633266][ T9454] [j_gadget] assign id 2 to function ffs.diag
[   29.641329][ T9454] [j_gadget] assign id 3 to function gser.0
[   29.659925][ T8404] RNDIS_IPA NetDev was opened
[   29.661536][ T9454] [j_gadget] assign id 4 to function cser.dun.0
[   29.675492][ T9454] [j_gadget] assign id 5 to function cser.dun.2
[   29.710319][ T9454] dwc3 a600000.dwc3: Set IRQ thread:irq/157-dwc3 pid:9512 to SCHED_NORMAL prio
[   29.834220][   T65] msm_eusb2_phy ff4000.hsphy: Could not get usb psy
[   29.877318][ T9664] QCMAP: HW Address for dev wlan1: ae:7f:99:c2:c9:b4
[   30.013201][ T9781] QCMAP: Interface Up for rndis0
[   30.026033][   T65] android_work: sent uevent USB_STATE=CONNECTED
[   30.225848][   T65] msm_eusb2_phy ff4000.hsphy: Could not get usb psy
[   30.233359][   T65] android_work: sent uevent USB_STATE=CONFIGURED
[   30.304237][ T9512] [rnids_mac] RNDIS_OID_802_3_CURRENT_ADDRESS 6c:c8:a6:d2:34:5f
[   30.316293][ T9512] [rnids_mac] RNDIS_OID_802_3_PERMANENT_ADDRESS 6c:c8:a6:d2:34:5f
[   30.337125][ T7765] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
[   30.337176][    T9] dwc3 a600000.dwc3: Clr_TRB ring of ep1in
[   30.350186][  T179] RNDIS_IPA@rndis_ipa_start_xmit@1040@ctx:kworker/3:41: Missing pipe connected and/or iface up
[   30.352996][    T9] dwc3 a600000.dwc3: Clr_TRB ring of ep1out
[   30.368317][T10022] QCAMP: rndis0 mode
[   30.374246][T10024] QCMAP:Enable mobileap
[   30.379783][    T9] ipa ipa3_uc_state_check:752 uC is not loaded
[   30.382859][T10029] QCMAP: LINK_UP message posted
[   30.392684][    T9] ipa ipa3_uc_debug_stats_alloc:1721 fail to alloc offload stats
[   30.403358][T10036] QCMAP:Enable mobileap done
[   30.408072][    T9] ipa ipa3_uc_state_check:752 uC is not loaded
[   30.408091][    T9] ipa ipa3_uc_debug_stats_alloc:1721 fail to alloc offload stats
[   30.409089][    T9] ipa_usb_notify_cb: Set net_ready_trigger
[   30.418387][T10055] QCMAP:Start initing COEX qmi client with timeout
[   30.422643][    T9] RNDIS_IPA NetDev pipes were connected
[   30.500615][ T8404] br-lan: port 3(rndis0) entered blocking state
[   30.507101][ T8404] br-lan: port 3(rndis0) entered disabled state
[   30.516215][ T8404] device rndis0 entered promiscuous mode
[   30.525803][ T8404] br-lan: port 3(rndis0) entered blocking state
[   30.532153][ T8404] br-lan: port 3(rndis0) entered forwarding state
[   30.559302][T10177] QCMAP: HW Address for dev rndis0: 9a:1f:9d:b6:4c:d2
[   30.721663][T10312] [guangwei.li] recv uevent ACTION=change SUBSYSTEM=android_usb USB_STATE=CONNECTED
[   30.739850][T10324] [guangwei.li] recv uevent ACTION=change SUBSYSTEM=android_usb USB_STATE=CONFIGURED
[   30.753227][T10324] [guangwei.li] this script only for rndis and ecm function switch.
[   30.859491][T10398] QCMAP: HW Address for dev rndis0: 9a:1f:9d:b6:4c:d2
[   32.269743][ T8969] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:6191 IPA received MPSS AFTER_POWERUP
[   32.278553][ T8969] ipa ipa3_odl_pipe_open:371 adpl pipe not configured
[   32.285432][ T8969] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:6204 IPA AFTER_POWERUP handling is complete
[   32.289051][   T55] qcom_smd_qrtr_probe:SMD QRTR driver probed
[   32.294998][ T8969] remoteproc remoteproc0: remote processor 4080000.remoteproc-mss is now up
[   32.301587][    C0] qrtr: Modem QMI Readiness TX cmd:0x2 node[0x3]
[   32.316096][    C0] qrtr: Modem QMI Readiness RX cmd:0x2 node[0x3]
[   32.490410][   T74] ql_qup_power_qmi_send_active_ind() qup power state active ind result: 0
[   32.490540][   T52] coresight-remote-etm soc:modem2_etm0: Connection established between QMI handle and 11 service
[   32.509964][   T52] coresight-remote-etm soc:modem_etm0: Connection established between QMI handle and 2 service
[   32.571533][    T9] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
[   32.596818][ T7765] ipa ipa3_uc_wdi_event_log_info_handler:399 WDI stats ofst=0x141100
[   32.605324][ T7765] ipa ipa3_uc_ntn_event_log_info_handler:19 NTN protocol missing 0x9
[   32.607784][    T9] ipa-wan ipa3_q6_clnt_svc_arrive:1936 send ipa3_qmi_init_modem_send_sync_msg to modem rc:0
[   32.624350][  T138] [kworke][0x2b87d1dc][15:30:46.219834] wlan: [138:I:IPA] wlan_ipa_uc_loaded_handler: UC READY
[   32.647567][T11514] QCMAP:COEX NR qmi client is inited with handle
[   32.650323][  T138] [kworke][0x2b8f6d8c][15:30:46.245803] wlan: [138:I:IPA] wlan_ipa_uc_loaded_handler: TX buffers mapped to IPA
[   32.685246][T11457] input: aw_sar0_ch0d as /devices/platform/soc/9c0000.qcom,qupv3_0_geni_se/998000.i2c/i2c-3/3-0012/input/input3
[   32.697741][T11457] input: aw_sar0_ch1d as /devices/platform/soc/9c0000.qcom,qupv3_0_geni_se/998000.i2c/i2c-3/3-0012/input/input4
[   32.933436][T11754] [murphy] enter thread_msg_rev_port_bridge
[   32.935458][T11723] send linux version to modem start
[   32.935458][T11723]
[   32.939598][T11754] [murphy]:rev_port_bridge_fd :4
[   32.952766][T11754] qfile_client_socket_init,sockfd=11
[   32.952766][T11754]
[   32.960588][T11754] [murphy] out qfile_sock_fd: 11
[   32.965684][T11754] qfile_client_socket_init,sockfd=12
[   32.965684][T11754]
[   32.973521][T11754] [murphy] out qfile_sock_fd: 12
[   33.771687][T12310] QCMAP:COEX NR indication registration success
[   33.910794][T12382] QCMAP: Receive QMI_COEX_NR_STATUS_IND_V01
[   33.920963][T12391] QCMAP: Received N79 disable flag
[   34.029357][T12470] QCMAP: rndis0 Client IP Addr 10.10.0.10
[   34.144896][T12547] smcinvoke: process_accept_req: Setting pid:12547, server id : 25 state to defunct
[   34.152384][T11437] ql_atcop_uci_config(): success to execute command: uci get ql_cust_config.@atcop_configs[0].log_config, ATCOP_UCI_CONFIG_LOG: 1
[   34.152384][T11437]
[   34.152384][T11437]
[   34.172827][   T52] cnss: QMI DMS service connected, state: 0x4d06107
[   34.194508][T11437] [QUEC][THERM1]
[   34.194508][T11437]
[   34.202652][T11437] [QUEC][THERM] file == NULL !
[   34.202652][T11437]
[   34.256688][T12624] [QSCLK] Get the sclk value is 0
[   34.256688][T12624]
[   34.268542][T12556] ql_uim_qmi_client_init: uim qmi client init success
[   34.268542][T12556]
[   34.278594][T12556] ql_register_at_commands(): 1 : cmd_name  : +QBLKERASE
[   34.289841][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.305818][T12556] ql_register_at_commands(): 1 : cmd_name  : +QFTEST
[   34.322877][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.334957][T12556] ql_register_at_commands(): 1 : cmd_name  : +QFOTAPID
[   34.342321][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.349711][T12556] ql_register_at_commands(): 1 : cmd_name  : +QCFG
[   34.357090][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.364489][T12556] ql_register_at_commands(): 1 : cmd_name  : +QPCIE
[   34.372275][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.379751][T12556] ql_register_at_commands(): 1 : cmd_name  : +QFASTBOOT
[   34.387543][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.394849][T12556] ql_register_at_commands(): 1 : cmd_name  : +QPOWD
[   34.403170][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.410798][T12556] ql_register_at_commands(): 1 : cmd_name  : +QPRFMOD
[   34.418150][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   34.656340][T12909] QCMAP: DSD service available
[   35.545935][T12556] ql_register_at_commands(): 1 : cmd_name  : +QSCLK
[   35.552808][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.560098][T12556] ql_register_at_commands(): 1 : cmd_name  : +QNAND
[   35.567206][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.575091][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPS
[   35.581887][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.589141][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSLOC
[   35.596708][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.604029][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSCFG
[   35.611056][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.618413][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSGNMEA
[   35.625682][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.632791][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSDEL
[   35.640106][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.647519][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSEND
[   35.654626][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.661711][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSXTRA
[   35.669069][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.676093][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSXTRATIME
[   35.683499][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.690487][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSXTRADATA
[   35.697988][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.705068][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSSUPLURL
[   35.712453][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.719637][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSSUPLCA
[   35.727115][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.734285][T12556] ql_register_at_commands(): 1 : cmd_name  : +QGPSLOCK
[   35.741433][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.748563][T12556] ql_register_at_commands(): 1 : cmd_name  : +QFCT
[   35.755583][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.762814][T12556] ql_register_at_commands(): 1 : cmd_name  : +QETH
[   35.769555][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.776838][T12556] ql_register_at_commands(): 1 : cmd_name  : +QMAP
[   35.783597][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.790597][T12556] ql_register_at_commands(): 1 : cmd_name  : +QMAPWAC
[   35.798849][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.806336][T12556] ql_register_at_commands(): 1 : cmd_name  : +QRNRU
[   35.813414][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.820926][T12556] ql_register_at_commands(): 1 : cmd_name  : +QTEMP
[   35.829232][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.837467][T12556] ql_register_at_commands(): 1 : cmd_name  : +QCUSTAT
[   35.844904][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.852277][T12556] ql_register_at_commands(): 1 : cmd_name  : +QADC
[   35.860159][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.867449][T12556] ql_register_at_commands(): 1 : cmd_name  : +QWSETMAC
[   35.874865][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.882398][T12556] ql_register_at_commands(): 1 : cmd_name  : +QDMSG
[   35.890303][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.897623][T12556] ql_register_at_commands(): 1 : cmd_name  : +QABFOTA
[   35.905078][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.912391][T12556] ql_register_at_commands(): 1 : cmd_name  : +QTEST
[   35.919199][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.926291][T12556] ql_register_at_commands(): 1 : cmd_name  : +QAGPIO
[   35.933332][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.940729][T12556] ql_register_at_commands(): 1 : cmd_name  : +CBC
[   35.947455][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.954487][T12556] ql_register_at_commands(): 1 : cmd_name  : +QLLM
[   35.961323][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.968355][T12556] ql_register_at_commands(): 1 : cmd_name  : +QHWV
[   35.975536][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.983143][T12556] ql_register_at_commands(): 1 : cmd_name  : +QFTCMD
[   35.990262][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   35.997354][T12556] ql_register_at_commands(): 1 : cmd_name  : +QTHERMAL
[   36.004969][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.012542][T12556] ql_register_at_commands(): 1 : cmd_name  : +QSECBOOT
[   36.020626][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.027959][T12556] ql_register_at_commands(): 1 : cmd_name  : +QMBIM
[   36.034969][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.042599][T12556] ql_register_at_commands(): 1 : cmd_name  : +QUPTIME
[   36.049830][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.058707][T12556] ql_register_at_commands(): 1 : cmd_name  : +QIP6CFG
[   36.066662][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.074386][T12556] ql_register_at_commands(): 1 : cmd_name  : +QPLATCFG
[   36.082240][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.090520][T12556] ql_register_at_commands(): 1 : cmd_name  : +QSECCFG
[   36.098592][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.105618][T12556] ql_register_at_commands(): 1 : cmd_name  : +QFUSE
[   36.112578][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.119653][T12556] ql_register_at_commands(): 1 : cmd_name  : +QLWFOTA
[   36.126725][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.133908][T12556] ql_register_at_commands(): 1 : cmd_name  : +QLOG
17 

[   36.140690][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.148515][T12556] ql_register_at_commands(): 1 : cmd_name  : +QASDIVCFG
[   36.155614][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.162615][T12556] ql_register_at_commands(): 1 : cmd_name  : +QADBAUTH
[   36.169825][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.176799][T12556] ql_register_at_commands(): 1 : cmd_name  : +QSIMTYPE
[   36.183823][T12556] sending QMI_AT_REG_AT_CMD_FWD_EX_REQ_V01 message
[   36.191209][T12556] ql_register_oem_at_commands: no_of_commands=52
[   36.191209][T12556] 
[   36.241074][T13648] kmwan: sensitivity and mode are set.
[   36.655141][T14004] sch: init (2.0)
[   36.877551][T14242] HM: DMS Service Available
[   36.882405][T14186] provisioning_test_app: start
[   36.922526][T14283] QCMAP: DSI Init Callback Received dsi_mode:0
[   36.938806][T14295] r8152:start/load
[   36.980320][T14312] r8152_rtl: exports duplicate symbol rtl8152_get_version (owned by r8152)
[   37.028854][T14414] r8168:start/load
[   37.135083][T13806] ipa ipa3_set_aggr_limit:6093 set rx_buff_sz config from netmngr 8192
[   37.163863][T13806] ipa ipa3_set_aggr_limit:6093 set rx_buff_sz config from netmngr 4096
[   37.182465][T13806] ipa-wan ipa3_wwan_ioctl:4498 dev(rmnet_data0) register to IPA
[   37.479133][T14775] QCMAP: DSI Init Callback Received dsi_mode:1
[   37.619366][ T7701] [schedu][0x313f33c5][15:30:51.214846] wlan: [7701:E:QDF] qdf_mc_timer_start: Cannot start timer in state = 21 tx_main_timer_func [wlan]
[   38.536812][T16060] pairing_client_app: start
[   39.719051][T16920] tertf: br-lan registered, add it
[   41.409873][T18205] IOSS:start/load
[   41.437449][T18214] (NULL device *): ioss:cfg:IOSS version 0x2000000, API version 9
[   41.439824][T18214] (NULL device *): ioss:cfg:Root device probe completed
[   41.440073][T11507] (NULL device *): ioss:cfg:IPA is ready
[   41.440089][T11507] (NULL device *): ioss:cfg:Starting PCI
[   41.440108][T11507] (NULL device *): ioss:cfg:Adding device 0000:01:00.0
[   41.440130][T11507] ioss 0000:01:00.0-ioss: ioss:ERR:(0000:01:00.0) Failed to register device with ioss bus
[   41.453951][T18237] (NULL device *): ioss:cfg:Registering Platform driver qcom-ethqos_ioss
[   41.455807][T18237] qcom-ethqos_ioss 22fc0000.qcom,emac1-ioss: ioss:cfg:(eth0) addr: , driver: st_xgmac Jan_2016, firmware: , erom: 
[   41.456628][T18237] RTL8221B-VB-CG 2.5Gbps PHY stmmac_dev1-0:01: [wtr_eth] rtl822x_set_wol
[   41.457660][T18237] qcom-ethqos ethqos_enable_wol:5930 Enabled WoL
[   48.937312][    C2] [soft_i][0x3e330210][15:31:02.532796] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 1 ranges
[   48.951003][    C2] [soft_i][0x3e3704d5][15:31:02.546487] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2412, end freq 2452
[   48.965758][    C2] [soft_i][0x3e3b576d][15:31:02.561241] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 1
[   48.977053][    C2] [soft_i][0x3e3ea6a6][15:31:02.572538] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2412, ch 1, end: freq 2452, ch 9
[   48.991220][    C2] [soft_i][0x3e42cd09][15:31:02.586703] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   49.003593][    C2] [soft_i][0x3e466d07][15:31:02.599076] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   49.015955][    C2] [soft_i][0x3e4a0c2a][15:31:02.611438] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   49.031006][    C2] [soft_i][0x3e4e7509][15:31:02.626490] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2412
[   49.042575][    C2] [soft_i][0x3e51d841][15:31:02.638052] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2417
[   49.054145][    C2] [soft_i][0x3e553c76][15:31:02.649629] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2422
[   49.065718][    C2] [soft_i][0x3e58a07a][15:31:02.661202] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2427
[   49.077280][    C2] [soft_i][0x3e5c03a6][15:31:02.672765] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2432
[   49.088820][    C2] [soft_i][0x3e5f6526][15:31:02.684304] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2437
[   49.100359][    C2] [soft_i][0x3e62c6a5][15:31:02.695844] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2442
[   49.111883][    C2] [soft_i][0x3e6626e3][15:31:02.707368] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2447
[   49.123420][    C2] [soft_i][0x3e698832][15:31:02.718905] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2452
[   49.135154][    C2] [soft_i][0x3e6cf827][15:31:02.730638] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   49.149588][    C2] [soft_i][0x3e7132cd][15:31:02.745073] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   49.164033][    C2] [soft_i][0x3e756e2e][15:31:02.759518] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   51.053947][    C2] [soft_i][0x409f1dab][15:31:04.649431] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 1 ranges
[   51.067622][    C2] [soft_i][0x40a31f4e][15:31:04.663106] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2457, end freq 2472
[   51.082363][    C2] [soft_i][0x40a770d7][15:31:04.677847] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 1
[   51.093628][    C2] [soft_i][0x40aabdb2][15:31:04.689112] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2457, ch 10, end: freq 2472, ch 13
[   51.107819][    C2] [soft_i][0x40aee61c][15:31:04.703304] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   51.120141][    C2] [soft_i][0x40b28246][15:31:04.715626] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   51.132458][    C2] [soft_i][0x40b61e06][15:31:04.727943] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   51.147445][    C2] [soft_i][0x40ba820d][15:31:04.742930] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2457
[   51.159065][    C2] [soft_i][0x40bde985][15:31:04.754549] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2462
[   51.170611][    C2] [soft_i][0x40c14ae8][15:31:04.766088] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2467
[   51.182137][    C2] [soft_i][0x40c4abdb][15:31:04.777620] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2472
[   51.193838][    C2] [soft_i][0x40c8195d][15:31:04.789321] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   51.208264][    C2] [soft_i][0x40cc5384][15:31:04.803749] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   51.222675][    C2] [soft_i][0x40d08c58][15:31:04.818160] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   51.773766][T20140] r8168_ioss:start/load
[   51.784570][T20158] (NULL device *): ioss:cfg:Registering PCI driver r8168_ioss
[   51.811904][T20171] QTI: DPM Init cb
[   51.827521][T20184] QTI: Modem is up
[   53.496456][T20939] aqc_ioss:start/load
[   53.505941][T20941] (NULL device *): ioss:cfg:Registering PCI driver aqc-ioss
[   53.534348][T20960] r8125_ioss:start/load
[   53.542003][T20961] (NULL device *): ioss:cfg:Registering PCI driver r8125_ioss
[   57.085859][T22525] active_slot[0] inactive_slot[1]
[   57.691275][T23006] ++++ /etc/scripts/init.post_boot.sh -> done sched settings
[   57.755939][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> START qdssconfig for SDXPINN
[   57.765050][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> enable_sdxpinn_debug START
[   57.773986][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> adjust_permission START
[   57.795239][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> adjust_permission END
[   57.803663][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> create_stp_policy START
[   57.820400][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> create_stp_policy END
[   57.828793][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> enable_stm_events START
[   57.837527][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> enable_cti_flush_for_etf START
[   57.846914][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> START dcc settings
[   57.948768][T23056] msm-dcc 240ff000.dcc_v2: DCC list passed 4
[   57.955873][T23056] msm-dcc 240ff000.dcc_v2: All values written to enable.
[   57.962983][T23056] msm-dcc 240ff000.dcc_v2: DCC list passed 6
[   57.969221][T23056] msm-dcc 240ff000.dcc_v2: All values written to enable.
[   57.976445][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> END dcc settings
[   57.984401][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> ENABLE-FTRACE START
[   57.992606][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> enable_sdxpinn_debug END
[   58.001184][T23056] ++++ /etc/scripts/init.qti.kernel.debug.sh -> END qdssconfig for SDXPINN
[   58.106717][T23132] Try to start wlan_services based on procd
[   58.648800][T23587] [iwpriv][0x49502b9b][15:31:12.244284] wlan: [23587:E:SAP] wlansap_set_dfs_nol: clear the DFS NOL
[   58.734577][T23598] qcom rproc: 4080000.remoteproc-mss: recovery enabled
[   59.863130][T24090] QCMAP: Modem in service NAS indication received on sub0
[   63.391642][T24386] QCMAP:bringup v4
[   63.418260][T24390] QCMAP:bringup v6
[   63.632497][T24401] QCMAP:WAN connected v4 on sub id:0profile:1
[   63.665802][T24414] QCMAP:WAN connected v6 on sub id:0profile:1
[   63.834834][T24443] [iwpriv][0x4f3f8423][15:31:17.430317] wlan: [24443:E:SAP] wlansap_set_dfs_nol: clear the DFS NOL
[   66.866270][ T7605] ipa-wan ipa3_wwan_set_modem_state:5031 nlmsg: <ALERT_NAME=upstreamEvent> <UPSTREAM=rmnet_data0> <STATE=UP>
[   66.906889][ T7605] ipa-wan ipa3_wwan_set_modem_state:5031 nlmsg: <ALERT_NAME=upstreamEvent> <UPSTREAM=rmnet_data0> <STATE=UP>
[   67.143577][T25651] [add_dev_config 319]add node success. iface:modem_cpu, dev:rmnet_data0, ifindex:21
[   67.946014][    C0] [soft_i][0x53f3f69b][15:31:21.541497] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 2 ranges
[   67.959725][    C0] [soft_i][0x53f7fadf][15:31:21.555208] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2422, end freq 2472
[   67.974524][    C0] [soft_i][0x53fc50dd][15:31:21.570007] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 1 tlv id 4718600, start freq 5825, end freq 5825
[   67.989287][    C0] [soft_i][0x5400a406][15:31:21.584769] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 2
[   68.000605][    C0] [soft_i][0x5403f506][15:31:21.596089] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2422, ch 3, end: freq 2472, ch 13
[   68.014882][    C0] [soft_i][0x540823b4][15:31:21.610365] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   68.027239][    C0] [soft_i][0x540bc277][15:31:21.622722] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   68.039585][    C0] [soft_i][0x540f606f][15:31:21.635068] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   68.054615][    C0] [soft_i][0x5413c7ba][15:31:21.650099] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 5825, ch 165, end: freq 5825, ch 165
[   68.069016][    C0] [soft_i][0x5417ffc9][15:31:21.664500] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   68.081369][    C0] [soft_i][0x541b9e3e][15:31:21.676852] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   68.093744][    C0] [soft_i][0x541f3e48][15:31:21.689226] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: beacause clean_unsafechan is:1,No retreat
[   68.107780][    C0] [soft_i][0x54235b03][15:31:21.703263] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   68.122233][    C0] [soft_i][0x54279729][15:31:21.717718] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   68.136698][    C0] [soft_i][0x542bd40a][15:31:21.732183] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   69.904816][T27062] conntrack (27062) used greatest stack depth: 8688 bytes left
[   70.093423][T27122] conntrack (27122) used greatest stack depth: 8608 bytes left
[   71.716877][T27774] [iwpriv][0x5844b552][15:31:25.312360] wlan: [27774:E:SAP] wlansap_set_dfs_nol: clear the DFS NOL
[   76.693982][T29945] [iwpriv][0x5df6d841][15:31:30.289466] wlan: [29945:E:SAP] wlansap_set_dfs_nol: clear the DFS NOL
[   80.193768][    C3] [soft_i][0x61f82bbc][15:31:58.290556] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 1 ranges
[   80.207520][    C3] [soft_i][0x61fc3346][15:31:58.304309] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2457, end freq 2472
[   80.222314][    C3] [soft_i][0x620088d2][15:31:58.319103] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 1
[   80.233619][    C3] [soft_i][0x6203d8bc][15:31:58.330408] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2457, ch 10, end: freq 2472, ch 13
[   80.247917][    C3] [soft_i][0x6208090d][15:31:58.344705] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   80.260301][    C3] [soft_i][0x620ba9e3][15:31:58.357089] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   80.272676][    C3] [soft_i][0x620f4a06][15:31:58.369464] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   80.287731][    C3] [soft_i][0x6213b329][15:31:58.384519] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2457
[   80.299288][    C3] [soft_i][0x621715e8][15:31:58.396075] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2462
[   80.310840][    C3] [soft_i][0x621a7860][15:31:58.407627] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2467
[   80.322392][    C3] [soft_i][0x621ddabb][15:31:58.419179] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2472
[   80.334319][    C3] [soft_i][0x6221592a][15:31:58.431104] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   80.348845][    C3] [soft_i][0x62259ac5][15:31:58.445631] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   80.363499][    C3] [soft_i][0x6229e5d3][15:31:58.460285] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   84.083056][    C3] [soft_i][0x666b9c53][15:32:02.179721] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 2 ranges
[   84.096812][    C3] [soft_i][0x666fa30a][15:32:02.193464] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2422, end freq 2472
[   84.111595][    C3] [soft_i][0x6673f8ea][15:32:02.208262] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 1 tlv id 4718600, start freq 5825, end freq 5825
[   84.126382][    C3] [soft_i][0x66784dfc][15:32:02.223049] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 2
[   84.137700][    C3] [soft_i][0x667b9ec8][15:32:02.234366] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2422, ch 3, end: freq 2472, ch 13
[   84.151852][    C3] [soft_i][0x667fc432][15:32:02.248518] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   84.164227][    C3] [soft_i][0x66836451][15:32:02.260892] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   84.176589][    C3] [soft_i][0x6687037d][15:32:02.273255] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   84.191630][    C3] [soft_i][0x668b6b90][15:32:02.288295] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 5825, ch 165, end: freq 5825, ch 165
[   84.206021][    C3] [soft_i][0x668fa2ec][15:32:02.302686] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   84.218369][    C3] [soft_i][0x669340f4][15:32:02.315033] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   84.230712][    C3] [soft_i][0x6696deba][15:32:02.327376] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: beacause clean_unsafechan is:1,No retreat
[   84.244866][    C3] [soft_i][0x669b0432][15:32:02.341528] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   84.259390][    C3] [soft_i][0x669f458d][15:32:02.356052] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   84.273889][    C3] [soft_i][0x66a38515][15:32:02.370552] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   85.366316][    C3] [soft_i][0x67e39132][15:32:03.462946] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 1 ranges
[   85.380022][    C3] [soft_i][0x67e7953a][15:32:03.476653] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2457, end freq 2472
[   85.394760][    C3] [soft_i][0x67ebe6aa][15:32:03.491391] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 1
[   85.406032][    C3] [soft_i][0x67ef340c][15:32:03.502663] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2457, ch 10, end: freq 2472, ch 13
[   85.420236][    C3] [soft_i][0x67f35d65][15:32:03.516867] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   85.432563][    C3] [soft_i][0x67f6f9d6][15:32:03.529193] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   85.444898][    C3] [soft_i][0x67fa9706][15:32:03.541528] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   85.459896][    C3] [soft_i][0x67fefb53][15:32:03.556518] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2457
[   85.471418][    C3] [soft_i][0x68025bff][15:32:03.568047] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2462
[   85.482949][    C3] [soft_i][0x6805bcdc][15:32:03.579578] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2467
[   85.494491][    C3] [soft_i][0x68091e73][15:32:03.591119] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2472
[   85.506189][    C3] [soft_i][0x680c8bbe][15:32:03.602816] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   85.520593][    C3] [soft_i][0x6810c435][15:32:03.617221] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   85.535009][    C3] [soft_i][0x6814fd57][15:32:03.631636] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   87.113091][    C3] [soft_i][0x69e35163][15:32:05.209716] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 2 ranges
[   87.126812][    C3] [soft_i][0x69e7567c][15:32:05.223438] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2422, end freq 2472
[   87.141552][    C3] [soft_i][0x69eba810][15:32:05.238179] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 1 tlv id 4718600, start freq 5825, end freq 5825
[   87.156286][    C3] [soft_i][0x69eff91a][15:32:05.252913] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 2
[   87.167542][    C3] [soft_i][0x69f34554][15:32:05.264169] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2422, ch 3, end: freq 2472, ch 13
[   87.181640][    C3] [soft_i][0x69f766b9][15:32:05.278267] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   87.193955][    C3] [soft_i][0x69fb024b][15:32:05.290582] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   87.206285][    C3] [soft_i][0x69fe9f18][15:32:05.302912] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   87.221276][    C3] [soft_i][0x6a030366][15:32:05.317903] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 5825, ch 165, end: freq 5825, ch 165
[   87.235645][    C3] [soft_i][0x6a073910][15:32:05.332272] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   87.247979][    C3] [soft_i][0x6a0ad59c][15:32:05.344599] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   87.260306][    C3] [soft_i][0x6a0e7292][15:32:05.356932] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: beacause clean_unsafechan is:1,No retreat
[   87.274271][    C3] [soft_i][0x6a1289e2][15:32:05.370896] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   87.288691][    C3] [soft_i][0x6a16c391][15:32:05.385318] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   87.303103][    C3] [soft_i][0x6a1afc72][15:32:05.399730] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   88.397079][    C3] [soft_i][0x6b5b7b90][15:32:06.493692] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 1 ranges
[   88.410849][    C3] [soft_i][0x6b5f8516][15:32:06.507473] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2457, end freq 2472
[   88.425681][    C3] [soft_i][0x6b63dd82][15:32:06.522305] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 1
[   88.429715][T30484] [iwpriv][0x6b650c47][15:32:06.526341] wlan: [30484:E:SAP] wlansap_set_dfs_nol: clear the DFS NOL
[   88.437000][    C3] [soft_i][0x6b672e90][15:32:06.533625] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2457, ch 10, end: freq 2472, ch 13
[   88.462036][    C3] [soft_i][0x6b6e840d][15:32:06.558659] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   88.474427][    C3] [soft_i][0x6b722584][15:32:06.571052] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   88.486795][    C3] [soft_i][0x6b75c523][15:32:06.583420] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   88.501834][    C3] [soft_i][0x6b7a2c52][15:32:06.598449] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2457
[   88.513397][    C3] [soft_i][0x6b7d9056][15:32:06.610022] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2462
[   88.524950][    C3] [soft_i][0x6b80f2d6][15:32:06.621576] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2467
[   88.536501][    C3] [soft_i][0x6b845533][15:32:06.633127] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2472
[   88.548234][    C3] [soft_i][0x6b87c52a][15:32:06.644860] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   88.562725][    C3] [soft_i][0x6b8c0413][15:32:06.659352] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   88.577147][    C3] [soft_i][0x6b903dae][15:32:06.673773] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   93.088203][T30521] [iwpriv][0x70b9d6cf][15:32:11.184828] wlan: [30521:E:SAP] wlansap_set_dfs_nol: clear the DFS NOL
18 
[   93.655083][    C3] [soft_i][0x715fead9][15:32:11.751709] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 2 ranges
[   93.668778][    C3] [soft_i][0x7163ee00][15:32:11.765404] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2422, end freq 2472
[   93.683557][    C3] [soft_i][0x716841bf][15:32:11.780174] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 1 tlv id 4718600, start freq 5825, end freq 5825
[   93.698318][    C3] [soft_i][0x716c9572][15:32:11.794944] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 2
[   93.709618][    C3] [soft_i][0x716fe4ec][15:32:11.806243] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2422, ch 3, end: freq 2472, ch 13
[   93.723730][    C3] [soft_i][0x71740769][15:32:11.820357] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   93.736059][    C3] [soft_i][0x7177a415][15:32:11.832686] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   93.748380][    C3] [soft_i][0x717b402a][15:32:11.845007] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   93.763370][    C3] [soft_i][0x717fa46d][15:32:11.859997] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 5825, ch 165, end: freq 5825, ch 165
[   93.777737][    C3] [soft_i][0x7183d9ec][15:32:11.874363] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   93.790056][    C3] [soft_i][0x718775eb][15:32:11.886683] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   93.802374][    C3] [soft_i][0x718b11b2][15:32:11.899000] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: beacause clean_unsafechan is:1,No retreat
[   93.816343][    C3] [soft_i][0x718f2935][15:32:11.912967] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   93.830758][    C3] [soft_i][0x7193621f][15:32:11.927379] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   93.845170][    C3] [soft_i][0x71979b6a][15:32:11.941796] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
[   96.246954][    C3] [soft_i][0x745740b9][15:32:14.343574] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: Channel avoid event received with 1 ranges
[   96.260860][    C3] [soft_i][0x745b53b0][15:32:14.357480] wlan: [0:I:WMI] extract_reg_ch_avoid_event_tlv: range 0 tlv id 4718600, start freq 2457, end freq 2472
[   96.275630][    C3] [soft_i][0x745fa792][15:32:14.372252] wlan: [0:I:REGULATORY] reg_process_ch_avoid_event: band count 1
[   96.286931][    C3] [soft_i][0x7462f72d][15:32:14.383554] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: start: freq 2457, ch 10, end: freq 2472, ch 13
[   96.301166][    C3] [soft_i][0x746722cd][15:32:14.397789] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan0, band:0, unsafe:0
[   96.313554][    C3] [soft_i][0x746ac326][15:32:14.410166] wlan: [0:E:REGULATORY] hdd_get_band_adapter: ifname:wlan1, band:2, unsafe:1
[   96.325907][    C3] [soft_i][0x746e625d][15:32:14.422529] wlan: [0:E:REGULATORY] reg_process_ch_avoid_freq: this adapter is null or  adapter->clean_unsafechan is 0
[   96.340936][    C3] [soft_i][0x7472c989][15:32:14.437558] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2457
[   96.352484][    C3] [soft_i][0x74762bb0][15:32:14.449107] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2462
[   96.364030][    C3] [soft_i][0x74798da0][15:32:14.460653] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2467
[   96.375576][    C3] [soft_i][0x747cef98][15:32:14.472199] wlan: [0:I:REGULATORY] reg_process_ch_avoid_freq: Unsafe freq 2472
[   96.387504][    C3] [soft_i][0x74806e0a][15:32:14.484125] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sta freq:state:ispsd:pwr:psd:flags(hex):
[   96.402009][    C3] [soft_i][0x7484ae0f][15:32:14.498632] wlan: [0:I:REGULATORY] reg_dump_valid_6ghz_cur_chan_list: sap freq:state:ispsd:pwr:psd:flags(hex):
[   96.416518][    C3] [soft_i][0x7488ee3a][15:32:14.513141] wlan: [0:I:REGULATORY] reg_modify_chan_list_for_avoid_chan_ext: Don't disable reg channels for Coex unsafe channels
20

yes that is correct. Qualcomm, Quad-core @2.2GHz.
I am crossing my fingers for 2028, but that probably would be without any UI.
Yes I bought the flint 2 instead of the newer models but there is no hotspot like this I could find.
The mudi v2 is to old for me.

21 
[    0.000000][    T0] cgroup: Disabling pressure control group feature
[    0.000000][    T0] [rootwait_setup:325]*str=
[    0.000000][    T0] [rootwait_setup:325]*str=
[    0.000000][    T0] init_pcie_mode: pcie_mode =1
[    0.000000][    T0] [John]init_get_cdt_board_id 0x02010022
[    0.000000][    T0] qcom-ethqos ql_set_early_ethernet_mac:684 Mac address programmed: 000000000000000000000000
[    0.000000][    T0] qcom-ethqos ql_set_early_ethernet_mac:697 Invalid eamc0 address programmed: 00:00:00:00:00:00
[    0.000000][    T0] qcom-ethqos ql_set_early_ethernet_mac:703 Invalid eamc1 address programmed: 00:00:00:00:00:00
[    0.000000][    T0] qcom-ethqos set_early_ethernet_ipv4:618 Invalid ipv4 address programmed:
[    0.000000][    T0] qcom-ethqos set_early_ethernet_ipv6:643 Invalid ipv6 address programmed:
[    0.000000][    T0] qcom-ethqos set_early_ethernet_mac:671 Invalid Mac address programmed:
[    0.000000][    T0] qcom-ethqos set_ethernet_phyaddr:721 Invalid phy addr programmed:
[    0.000000][    T0] qcom-ethqos set_ethernet_speed:782 Invalid link speed programmed: 0
[    0.000000][    T0] Unknown kernel command line parameters "ql_overlay_rootfs=1 data_interface=[0,0] ql_pcie_mode=1 ql_pcie_ssc=0 ql_switch_usb=0 ql_pcie_id=[0x0000,0x0000,0x0000,0x0000,0] ql_cdt_board_id=0x02010022 ethmac=000000000000000000000000 eipv4= eipv6= eqos=", will be passed to user space.
[    0.000000][    T0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000][    T0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000][    T0] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.000000][    T0] Memory: 1520400K/1715756K available (20800K kernel code, 2776K rwdata, 12236K rodata, 1600K init, 1697K bss, 80668K reserved, 114688K cma-reserved)
[    0.000000][    T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000][    T0] trace event string verifier disabled
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0] rcu: 	RCU event tracing is enabled.
[    0.000000][    T0] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000][    T0] rcu: 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000][    T0] 	Trampoline variant of Tasks RCU enabled.
[    0.000000][    T0] 	Tracing variant of Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000][    T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000][    T0] GICv3: 988 SPIs implemented
[    0.000000][    T0] GICv3: 0 Extended SPIs implemented
[    0.000000][    T0] GICv3: Distributor has no Range Selector support
[    0.000000][    T0] Root IRQ handler: gic_handle_irq
[    0.000000][    T0] GICv3: 16 PPIs implemented
[    0.000000][    T0] GICv3: CPU0: found redistributor 0 region 0:0x0000000017260000
[    0.000000][    T0] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.000000][    T0] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000][    T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000000][    T0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.001640][    T0] arm-pv: using stolen time PV
[    0.001716][    T0] random: crng init done
[    0.001863][    T0] Console: colour dummy device 80x25
[    0.002012][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.002022][    T0] pid_max: default: 32768 minimum: 301
[    0.002092][    T0] LSM: Security Framework initializing
[    0.002126][    T0] SELinux:  Initializing.
[    0.002246][    T0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.002259][    T0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.003578][    T1] rcu: Hierarchical SRCU implementation.
[    0.003889][    T1] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.005159][    T1] EFI services will not be available.
[    0.005634][    T1] smp: Bringing up secondary CPUs ...
[    0.006260][    T0] Detected VIPT I-cache on CPU1
[    0.006301][    T0] GICv3: CPU1: found redistributor 100 region 0:0x0000000017280000
[    0.006405][    T0] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.007288][    T0] Detected VIPT I-cache on CPU2
[    0.007319][    T0] GICv3: CPU2: found redistributor 200 region 0:0x00000000172a0000
[    0.007406][    T0] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.008278][    T0] Detected VIPT I-cache on CPU3
[    0.008304][    T0] GICv3: CPU3: found redistributor 300 region 0:0x00000000172c0000
[    0.008385][    T0] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.008507][    T1] smp: Brought up 1 node, 4 CPUs
[    0.008534][    T1] SMP: Total of 4 processors activated.
[    0.008539][    T1] CPU features: detected: 32-bit EL0 Support
[    0.008543][    T1] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.008547][    T1] CPU features: detected: Common not Private translations
[    0.008551][    T1] CPU features: detected: CRC32 instructions
[    0.008556][    T1] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.008560][    T1] CPU features: detected: LSE atomic instructions
[    0.008564][    T1] CPU features: detected: Privileged Access Never
[    0.008568][    T1] CPU features: detected: RAS Extension Support
[    0.008572][    T1] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.137615][    T1] CPU: All CPU(s) started at EL1
[    0.137668][   T15] alternatives: patching kernel code
[    0.151488][    T1] devtmpfs: initialized
[    0.180793][    T1] KASLR enabled
[    0.181004][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.181029][    T1] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.182545][    T1] pinctrl core: initialized pinctrl subsystem
[    0.183481][    T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.185500][    T1] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.185678][    T1] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.185741][    T1] audit: initializing netlink subsys (disabled)
[    0.185883][   T38] audit: type=2000 audit(0.172:1): state=initialized audit_enabled=0 res=1
[    0.186353][    T1] thermal_sys: Registered thermal governor 'step_wise'
[    0.191296][    T1] cpuidle: using governor menu
[    0.191972][    T1] NET: Registered PF_QIPCRTR protocol family
[    0.191994][    T1] Minidump: Minidump driver hasn't probe, add region to pending list
[    0.192566][    T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.192705][    T1] ASID allocator initialised with 65536 entries
[    0.193260][    T1] Serial: AMBA PL011 UART driver
[    0.194234][    T1] pstore: Registered ramoops as persistent store backend
[    0.194243][    T1] ramoops: using 0x200000@0xffe00000, ecc: 0
[    0.195883][    T1] qcom-scm: __get_convention: qcom_scm: convention: smc arm 64
[    0.196193][    T1] qcom-scm: qcom_scm_query_wq_queue_info: WQ Info, feature: 1 call_ctx_cnt: 2 irq: 962
[    0.196384][    T1] qtee shmbridge registered default bridge with size 4194304 bytes
[    0.199691][    T1] shmbridge is enabled
[    0.199827][    T1] qcom-scm: scm_mem_protection_init_do: SCM call failed -5, resp 0
[    0.199834][    T1] MEM protection Not enabled, -5
[    0.222710][    T1] CPUidle PSCI: Initialized CPU PM domain topology
[    0.250348][    T1] rpmh_regulator_probe: smpk1: could not find RPMh address for resource
[    0.251661][    T1] qcom-memlat soc:qcom,memlat: Failure to probe memlat device: -517
[    0.256620][    T1] gcc-sdxpinn 80000.clock-controller: Registered GCC clocks
[    0.259887][    T1] QL-DYNAMIC-PROP: read value of [qcom,msm-eud@ff0000:quectel,dynamic-props-pcie:status] failed
[    0.263599][    T1] QL-DYNAMIC-PROP: device[qcom,pcie@0x48000000] property[status] changed [string:disabled]
[    0.263697][    T1] QL-DYNAMIC-PROP: device[mhi_dev@1bf4000] property[status] changed [string:disabled]
[    0.263730][    T1] QL-DYNAMIC-PROP: device[qcom,mhi_net_dev] property[status] changed [string:disabled]
[    0.264005][    T1] msm_sps_probe: sps:sps is ready
[    0.264811][    T1] qnoc-sdxpinn soc:interconnect@0: Registered SDXPINN ICC
[    0.265202][    T1] qnoc-sdxpinn soc:interconnect@1: Registered SDXPINN ICC
[    0.265424][    T1] qnoc-sdxpinn 190e0000.interconnect: Registered SDXPINN ICC
[    0.265903][    T1] qnoc-sdxpinn 19100000.interconnect: Registered SDXPINN ICC
[    0.266271][    T1] qnoc-sdxpinn 16c0000.interconnect: Registered SDXPINN ICC
[    0.267081][    T1] qnoc-sdxpinn 1640000.interconnect: Registered SDXPINN ICC
[    0.270761][    T1] amba 24d22000.funnel: Fixing up cyclic dependency with 24d20000.tpdm
[    0.271107][    T1] amba 24d03000.funnel: Fixing up cyclic dependency with 24d0a000.funnel
[    0.271151][    T1] amba 24d03000.funnel: Fixing up cyclic dependency with 24d22000.funnel
[    0.271339][    T1] amba 2480d000.funnel: Fixing up cyclic dependency with soc:modem_etm0
[    0.271569][    T1] amba 2480c000.funnel: Fixing up cyclic dependency with soc:modem_diag
[    0.271612][    T1] amba 2480c000.funnel: Fixing up cyclic dependency with 2480d000.funnel
[    0.271836][    T1] amba 24804000.funnel: Fixing up cyclic dependency with 2480c000.funnel
[    0.271876][    T1] amba 24804000.funnel: Fixing up cyclic dependency with soc:modem2_etm0
[    0.272093][    T1] amba 24803000.tpda: Fixing up cyclic dependency with 24804000.funnel
[    0.272135][    T1] amba 24803000.tpda: Fixing up cyclic dependency with 24800000.tpdm
[    0.272324][    T1] amba 2480e000.tpda: Fixing up cyclic dependency with 2480c000.funnel
[    0.272558][    T1] amba 24cc4000.tpda: Fixing up cyclic dependency with 24cc1000.tpdm
[    0.272600][    T1] amba 24cc4000.tpda: Fixing up cyclic dependency with 24cc0000.tpdm
[    0.272787][    T1] amba 24cc5000.funnel: Fixing up cyclic dependency with 24cc4000.tpda
[    0.273020][    T1] amba 26863000.tpda: Fixing up cyclic dependency with 26860000.tpdm
[    0.273058][    T1] amba 26863000.tpda: Fixing up cyclic dependency with 268a0000.tpdm
[    0.274147][    T1] amba 26810000.funnel: Fixing up cyclic dependency with 26863000.tpda
[    0.274188][    T1] amba 26810000.funnel: Fixing up cyclic dependency with 26340000.etm3
[    0.274229][    T1] amba 26810000.funnel: Fixing up cyclic dependency with 26240000.etm2
[    0.274279][    T1] amba 26810000.funnel: Fixing up cyclic dependency with 26140000.etm1
[    0.274317][    T1] amba 26810000.funnel: Fixing up cyclic dependency with 26040000.etm0
[    0.274695][    T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c29000.tpdm
[    0.274738][    T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c28000.tpdm
[    0.274776][    T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c00000.tpdm
[    0.274813][    T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24840000.tpdm
[    0.274854][    T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24854000.tpdm
[    0.274892][    T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24d03000.funnel
[    0.275123][    T1] amba 24c2c000.funnel: Fixing up cyclic dependency with 24d03000.funnel
[    0.275172][    T1] amba 24c2c000.funnel: Fixing up cyclic dependency with 24c2b000.tpda
[    0.275391][    T1] amba 24d09000.tpda: Fixing up cyclic dependency with 24d0a000.funnel
[    0.275430][    T1] amba 24d09000.tpda: Fixing up cyclic dependency with 24d40000.tpdm
[    0.275649][    T1] amba 24004000.tpda: Fixing up cyclic dependency with 24003000.tpdm
[    0.275693][    T1] amba 24004000.tpda: Fixing up cyclic dependency with 2400f000.tpdm
[    0.275952][    T1] amba 24041000.funnel: Fixing up cyclic dependency with 24002000.stm
[    0.275994][    T1] amba 24041000.funnel: Fixing up cyclic dependency with 24004000.tpda
[    0.276034][    T1] amba 24041000.funnel: Fixing up cyclic dependency with soc:snoc
[    0.276328][    T1] amba 24042000.funnel: Fixing up cyclic dependency with 24c2c000.funnel
[    0.276371][    T1] amba 24042000.funnel: Fixing up cyclic dependency with 26810000.funnel
[    0.276414][    T1] amba 24042000.funnel: Fixing up cyclic dependency with 24804000.funnel
[    0.276452][    T1] amba 24042000.funnel: Fixing up cyclic dependency with 24cc5000.funnel
[    0.276675][    T1] amba 24045000.funnel: Fixing up cyclic dependency with 24041000.funnel
[    0.276721][    T1] amba 24045000.funnel: Fixing up cyclic dependency with 24042000.funnel
[    0.277045][    T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0d000.tpdm
[    0.277088][    T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0b000.tpdm
[    0.277146][    T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0c000.tpdm
[    0.277184][    T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b09000.tpdm
[    0.277227][    T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0a000.tpdm
[    0.277449][    T1] amba 24b04000.funnel: Fixing up cyclic dependency with 24b08000.tpda
[    0.277488][    T1] amba 24b04000.funnel: Fixing up cyclic dependency with 24045000.funnel
[    0.277793][    T1] amba 24b05000.tmc: Fixing up cyclic dependency with 24b04000.funnel
[    0.278012][    T1] amba 24b06000.replicator: Fixing up cyclic dependency with soc:dummy_sink
[    0.278063][    T1] amba 24b06000.replicator: Fixing up cyclic dependency with 24b05000.tmc
[    0.278279][    T1] amba 24046000.replicator: Fixing up cyclic dependency with 24b06000.replicator
[    0.278472][    T1] amba 2404e000.replicator: Fixing up cyclic dependency with 24046000.replicator
[    0.278650][    T1] platform soc:dummy_replicator: Fixing up cyclic dependency with 2404e000.replicator
[    0.278826][    T1] platform soc:tmc_modem: Fixing up cyclic dependency with soc:dummy_replicator
[    0.279095][    T1] amba 24048000.tmc: Fixing up cyclic dependency with 2404e000.replicator
[    0.279313][    T1] amba 2404f000.tmc: Fixing up cyclic dependency with soc:dummy_replicator
[    0.281705][    T1] QL-DYNAMIC-PROP: device[qcom,pcie@1bf0000] property[status] changed [string:okay]
[    0.282789][    T1] QL-DYNAMIC-PROP: device[qcom,pcie0_msi@a0000000] property[status] changed [string:okay]
[    0.283545][    T1] QL-DYNAMIC-PROP: read value of [ssusb@a600000:quectel,dynamic-props-pcie:status] failed
[    0.283955][    T1] QL-DYNAMIC-PROP: read value of [hsphy@ff4000:quectel,dynamic-props-pcie:status] failed
[    0.284211][    T1] QL-DYNAMIC-PROP: read value of [ssphy@ff6000:quectel,dynamic-props-pcie:status] failed
[    0.286696][    T1] qcom_dma_iommu soc:dma_dev: assigned reserved memory node linux,cma
[    0.287023][    T1] DMA preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.296346][    T1] gh-watchdog hypervisor:qcom,gh-watchdog: QCOM Apps Watchdog Initialized
[    0.296365][    T1] Minidump: Minidump driver hasn't probe, add region to pending list
[    0.306266][    T1] gcc_emac0_gdsc: supplied by pmx75_s5_level
[    0.306612][    T1] gcc_emac1_gdsc: supplied by pmx75_s5_level
[    0.306863][    T1] gcc_pcie_1_gdsc: supplied by pmx75_s5_level
[    0.307088][    T1] gcc_pcie_1_phy_gdsc: supplied by pmx75_l17_level
[    0.307311][    T1] gcc_pcie_2_gdsc: supplied by pmx75_s5_level
[    0.307533][    T1] gcc_pcie_2_phy_gdsc: supplied by pmx75_l17_level
[    0.307755][    T1] gcc_pcie_gdsc: supplied by pmx75_l17_level
[    0.307965][    T1] gcc_pcie_phy_gdsc: supplied by pmx75_l17_level
[    0.308183][    T1] gcc_usb30_gdsc: supplied by pmx75_l17_level
[    0.308402][    T1] gcc_usb3_phy_gdsc: supplied by pmx75_s5_level
[    0.309180][    T1] Minidump: Enabled with max number of regions 200
[    0.310904][    T1] qsmmuv500-tbu 1680000.anoc_1_qtb: Unable to get the transactiontracker-base
[    0.311076][    T1] qsmmuv500-tbu 1688000.ipa_qtb: Unable to get the transactiontracker-base
[    0.311234][    T1] qsmmuv500-tbu 16d0000.pcie_qtb: Unable to get the transactiontracker-base
[    0.311444][    T1] arm-smmu 15000000.apps-smmu: probing hardware configuration...
[    0.311450][    T1] arm-smmu 15000000.apps-smmu: SMMUv2 with:
[    0.311471][    T1] arm-smmu 15000000.apps-smmu: 	stage 1 translation
[    0.311476][    T1] arm-smmu 15000000.apps-smmu: 	coherent table walk
[    0.311482][    T1] arm-smmu 15000000.apps-smmu: 	stream matching with 57 register groups
22

Hi, I tried to open this in the weekend but I need another screwdriver. My bits are to big for reaching the screw in the hole. I will try again later. In the meantime could you put back the "For Devolopers" categories? With the FCC ban for software updates coming October 27 this is important for the future.

23

Thank you for contacting GL.iNet Support.

Here is a quick update regarding your concerns:

Our firmware is based on OpenWrt; however, "Stock" support depends on chipset manufacturers releasing open-source drivers. While we support the community, we cannot guarantee specific dates for official OpenWrt upstream merging.

The October 2027 date refers to FCC regulatory deadlines for new certifications, not the end of support. We will continue to provide security patches and firmware updates for our devices well beyond that date.
We remain committed to keeping our hardware as open as possible for developers while complying with mandatory radio frequency regulations.