Support for Mikrotik Basebox2 RB912UAG-2HPnD revision 2

Hi,
Is there possibility to make OpenWRT for second revision of Mikrotik RB912UAG-2HPnD?
Recently Mikrotik changed this hardware and any compilation for previous version of RB912UAG-2HPnD is not working any more.
As the rev. 1 hardware is not available any more and we use this model for several applications with OpenWRT on-board it is very painful for us…
As far as I know in new revision 2 boards the main chip remained the same but there are different memory chips used and - what is more important - there is a different and currently not implemented on-board wifi initialization. This problem was described few days ago by @cezary and not solved up to now…
I will be grateful for any information allowing to implement this board.

Looking forward to any solution to make OpenWRT fully working on this hardware.

Thanks in advance,
Mike

Well, it would help if you could share any details about new HW

All details about hardware were provided by @cezary in this thread: Add support for Mikrotik RB912UAG-2HPnD r2

This topic was automatically closed 24 hours after the last reply. New replies are no longer allowed.