I have a problem with my PRO version.
When i update with tftp i get.
tftp 13960232 192.168.0.249 /root/tftp/uploadfile
but after it has altered white/red and reset it goes into some mode where plc is solid red and i cant do anything.
if i have the network cable in is requests another image.
dnsmasq-tftp: file /root/tftp/BE00A8C0.img not found for 192.168.0.190
I now try to install firmware-delos-dlan-pro-1200-ac-v4.0.1_2017-10-20.bin.
If i rename it to BE00A8C0.img it uploads and the device reboots and seems to start wifi but when i reset it goes back to PLC is solid red and i can not access it.
If I then attach network kabel it tftp download the image again and seems to be ok.
dnsmasq-dhcp: DHCPOFFER(enp2s0) 192.168.0.190 00:03:7f:09:0b:ad
dnsmasq-dhcp: DHCPREQUEST(enp2s0) 192.168.0.190 00:03:7f:09:0b:ad
dnsmasq-dhcp: DHCPACK(enp2s0) 192.168.0.190 00:03:7f:09:0b:ad
old 00:03:7f:09:0b:ad 192.168.0.190
dnsmasq-tftp: sent /root/tftp/BE00A8C0.img to 192.168.0.190
tftp 7602278 192.168.0.190 /root/tftp/BE00A8C0.img
dnsmasq-dhcp: DHCPDISCOVER(enp2s0) f4:06:8d:8f:d1:07
dnsmasq-dhcp: DHCPOFFER(enp2s0) 192.168.0.233 f4:06:8d:8f:d1:07
dnsmasq-dhcp: DHCPREQUEST(enp2s0) 192.168.0.233 f4:06:8d:8f:d1:07
dnsmasq-dhcp: DHCPACK(enp2s0) 192.168.0.233 f4:06:8d:8f:d1:07 devolo-334
old f4:06:8d:8f:d1:07 192.168.0.233 devolo-334
but then back to PLC solid red after reset.
When it seems ok I can connect to wifi with key, but i do not get any ip from dhcp and even if i set a static 192.168.0.100 i can not connect to in on any ip.
same behavior with openwrt-23.05.5-ath79-generic-devolo_dlan-pro-1200plus-ac-squashfs-sysupgrade.bin.