Support for AVM Fritz Repeater 1200 AX

RolandoMagico · December 5, 2022, 12:18pm

Hi,
is there any possibility to get OpenWrt running on a Fritz Repeater 1200 AX? I have a serial console and can see the boot log:

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-420817
S - IMAGE_VARIANT_STRING=MAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c5
B -       126 - PBL, Start
B -      1557 - bootable_media_detect_entry, Start
B -      3603 - bootable_media_detect_success, Start
B -      3606 - elf_loader_entry, Start
B -      4934 - auth_hash_seg_entry, Start
B -      5293 - auth_hash_seg_exit, Start
B -     96784 - elf_segs_hash_verify_entry, Start
B -    166415 - PBL, End
B -    137067 - SBL1, Start
B -    198982 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
B -    207125 - clock_init, Start
D -      7503 - clock_init, Delta
B -    214811 - boot_flash_init, Start
D -     13816 - boot_flash_init, Delta
B -    228689 - boot_config_data_table_init, Start
D -      4697 - boot_config_data_table_init, Delta - (575 Bytes)
B -    236436 - Boot Setting :  0x00033ecc
B -    242810 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:0
B -    249551 - sbl1_ddr_set_params, Start
B -    250984 - Pre_DDR_clock_init, Start
B -    256810 - Pre_DDR_clock_init, End
B -    896791 - do ddr sanity test, Start
D -        30 - do ddr sanity test, Delta
B -    901458 - Image Load, Start
D -     62799 - QSEE Image Loaded, Delta - (142584 Bytes)
B -    965172 - Image Load, Start
D -     13664 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B -    978867 - Image Load, Start
D -     72956 - APPSBL Image Loaded, Delta - (153808 Bytes)
B -   1051884 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -   1058350 - SBL1, End
D -    923936 - SBL1, Delta
S - Flash Throughput, 2240 KB/s  (310559 Bytes,  138587 us)
S - DDR Frequency, 666 MHz
S - Core 0 Frequency, 800 MHz
ATF NOTICE:  BL31: v2.1(release):6.2-avm_qca_atf-1200ax_wifi
ATF NOTICE:  BL31: Built : 15:24:59, May  6 2021
[001983cd7]QTISECLIB  Version v0.0 Built : 15:24:59, May  6 2021

[0019c0d84]QTISECLIB xPU Enabled

Building bad block table from 0 to 1024 of max blocks 2048

(AVM) EVA Revision: 1.11714 39733c1b
(C) Copyright 2018 AVM Date: Sep 28 2021 Time: 16:39:19 (0) 3 0x0-0x46409

[NAND:] 128MB WINBOND 2048 Pagesize 128k Blocksize 1024 Blocks HW
[SYSTEM:] QCA ARMv8 SOC 0x1BE Version 1.1
smem ram ptable found: ver: 1 len: 4
cmbblk is stable 5
PHY ID1: 0x4D
PHY ID2: 0xD0C0

Eva_AVM >.......................................................................

RolandoMagico · December 5, 2022, 12:20pm

Second part of boot log:

[    0.000000][0] Booting Linux on physical CPU 0x0
[    0.000000][0] Initializing cgroup subsys cpuset
[    0.000000][0] Initializing cgroup subsys cpu
[    0.000000][0] Initializing cgroup subsys cpuacct
[    0.000000][0] Linux version 4.4.60 (kbuild-team@jenkins-ci.avm.de) (gcc version 5.5.0 (Buildroot 2018.11.4) ) #1 SMP PREEMPT 2021-11-23
[    0.000000][0] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c5383d
[    0.000000][0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000][0] Machine model: AVM FRITZ!Repeater 1200 AX
[    0.000000][0] Reserved memory: OVERLAP DETECTED!
[    0.000000][0] q6_code_data@4b000000 (0x4b000000--0x4c000000) overlaps with q6_mem_regions@4b000000 (0x4b000000--0x4e000000)
[    0.000000][0] Reserved memory: OVERLAP DETECTED!
[    0.000000][0] q6_mem_regions@4b000000 (0x4b000000--0x4e000000) overlaps with q6_ipq5018_data@4c000000 (0x4c000000--0x4cd00000)
[    0.000000][0] Memory policy: Data cache writealloc
[    0.000000][0] [fw-info] Version 07.30
[    0.000000][0] [module-mem] Use 0x42000000-0x42000fff (mapped at 82000000-82000fff) for 0 modules
[    0.000000][0] [module-mem] Using whitelist, set default strict_mode=1
[    0.000000][0] psci: probing for conduit method from DT.
[    0.000000][0] psci: PSCIv1.1 detected in firmware.
[    0.000000][0] psci: Using standard PSCI v0.2 function IDs
[    0.000000][0] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000][0] PERCPU: Embedded 12 pages/cpu @8fd76000 s20172 r8192 d20788 u49152
[    0.000000][0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 49344
[    0.000000][0] Kernel command line:  swiotlb=1 slub_debug=-
[    0.000000][0] setup_slub_debug: slub_debug =
[    0.000000][0] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000][0] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000][0] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000][0] Memory: 185012K/199680K available (6654K kernel code, 864K rwdata, 2372K rodata, 1024K init, 1001K bss, 14668K reserved, 0K cma-reserved, 0K highmem)
[    0.000000][0] Virtual kernel memory layout:
[    0.000000][0]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000][0]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000][0]     vmalloc : 0x90800000 - 0xff800000   (1776 MB)
[    0.000000][0]     lowmem  : 0x80000000 - 0x90000000   ( 256 MB)
[    0.000000][0]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000][0]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000][0]       .text : 0x81208000 - 0x81bd0a30   (10019 kB)
[    0.000000][0]       .init : 0x81c00000 - 0x81d00000   (1024 kB)
[    0.000000][0]       .data : 0x81d00000 - 0x81dd8000   ( 864 kB)
[    0.000000][0]        .bss : 0x81dda000 - 0x81ed4770   (1002 kB)
[    0.000000][0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000][0] Preemptible hierarchical RCU implementation.
[    0.000000][0]       Build-time adjustment of leaf fanout to 32.
[    0.000000][0]       RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000][0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000][0] NR_IRQS:16 nr_irqs:16 16
[    0.000000][0] GICv2m: Node v2m: range[0xb00a000:0xb00affc], SPI[448:480]
[    0.000000][0] GICv2m: Node v2m: range[0xb00b000:0xb00bffc], SPI[480:512]
[    0.000000][0] Architected cp15 timer(s) running at 24.00MHz (virt).
[    0.000000][0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006][0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000019][0] Switching to timer-based delay loop, resolution 41ns
[    0.000582][0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000599][0] pid_max: default: 32768 minimum: 301
[    0.000696][0] Security Framework initialized
[    0.000723][0] AppArmor: AppArmor initialized
[    0.000761][0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000773][0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001481][0] Initializing cgroup subsys io
[    0.001507][0] Initializing cgroup subsys memory
[    0.001541][0] Initializing cgroup subsys devices
[    0.001556][0] Initializing cgroup subsys freezer
[    0.001568][0] Initializing cgroup subsys net_cls
[    0.001592][0] Initializing cgroup subsys pids
[    0.001633][0] CPU: Testing write buffer coherency: ok
[    0.002119][0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002193][0] Setting up static identity map for 0x41300000 - 0x41300058
[    0.054065][0] MSM Memory Dump base table set up
[    0.054103][0] MSM Memory Dump apps data table set up
[    0.090399][1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.090535][0] Brought up 2 CPUs
[    0.090558][0] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.090566][0] CPU: All CPU(s) started in SVC mode.
[    0.091255][0] devtmpfs: initialized
[    0.106459][0] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4
[    0.106857][0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.106895][0] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.107481][0] pinctrl core: initialized pinctrl subsystem
[    0.108960][0] NET: Registered protocol family 16
[    0.110511][0] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.111029][0] console [avm0] enabled
[    0.140310][0] cpuidle: using governor ladder
[    0.170346][0] cpuidle: using governor menu
[    0.170373][0] Creating Config Table
[    0.170982][0] NET: Registered protocol family 42
[    0.176225][0] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider
[    0.180474][0] [qcom_wdt] wdt_ipq40xx_probe ...
[    0.181122][0] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.182548][0] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.195248][0] hw-breakpoint: debug architecture 0x6 unsupported.
[    0.197363][0] CPU: IPQ5010, SoC Version: 1.1
[    0.198728][0] avm_alloc_page_extension node_extension_table[0] entries=65536 (size=262144)  alloced
[    0.198756][0] [fdt_get_reserved_mem_resource] mem_count = 15; search name = "avm_reboot_string"
[    0.198772][0] Reboot Status is: Power-On
[    0.200073][0] IPC logging disabled
[    0.200086][0] IPC logging disabled
[    0.200092][0] IPC logging disabled
[    0.200097][0] IPC logging disabled
[    0.200103][0] IPC logging disabled
[    0.200551][0] sps:sps is ready.
[    0.201512][0] console [pstore0] enabled
[    0.201775][0] pstore: Registered ramoops as persistent store backend
[    0.201791][0] ramoops: attached 0x20000@0x4a500000, ecc: 0/0
[    0.243075][0] SCSI subsystem initialized
[    0.243461][0] usbcore: registered new interface driver usbfs
[    0.243549][0] usbcore: registered new interface driver hub
[    0.243685][0] usbcore: registered new device driver usb
[    0.243804][0] pps_core: LinuxPPS API ver. 1 registered
[    0.243815][0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.243847][0] PTP clock support registered
[    0.246037][0] Advanced Linux Sound Architecture Driver Initialized.
[    0.246707][0] AVM PA for Linux version 4.4.60 (kbuild-team@jenkins-ci.avm.de) (gcc version 5.5.0 (Buildroot 2018.11.4) ) #1 SMP PREEMPT 2021-11-23
[    0.246707][0]  (early init)
[    0.246956][0] NET: Registered protocol family 8
[    0.246970][0] NET: Registered protocol family 20
[    0.247253][0] clocksource: Switched to clocksource arch_sys_counter
[    0.247904][0] AppArmor: AppArmor Filesystem Enabled
[    0.251241][0] NET: Registered protocol family 2
[    0.277465][0] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.277507][0] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.277550][0] TCP: Hash tables configured (established 2048 bind 2048)
[    0.277618][0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.277645][0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.277885][0] NET: Registered protocol family 1
[    0.278869][0] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.280277][0] audit: initializing netlink subsys (disabled)
[    0.280371][0] audit: type=2000 audit(0.270:1): initialized
[    0.293024][0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.293467][0] ANTFS Module: Version 2.46
[    0.293669][0] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.294382][0] fuse init (API version 7.23)
[    0.301515][0] Key type asymmetric registered
[    0.301542][0] Asymmetric key parser 'x509' registered
[    0.301590][0] io scheduler noop registered
[    0.301604][0] io scheduler deadline registered (default)
[    0.311551][0] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    0.312909][0] Registered Sucessfully
[    0.313831][0] ipq5018-pinctrl 1000000.pinctrl: invalid group "gpio21" for function "blsp0_uart1"
[    0.313864][0] ipq5018-pinctrl 1000000.pinctrl: invalid group "gpio20" for function "blsp0_uart1"
[    0.313916][0] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.314160][0] msm_dectuart_probe: set dectuart_port to ttyMSM0
[    0.314226][0] msm_serial 78af000.serial: uartclk = 1843199
[    0.314283][0] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 20, base_baud = 115199) is a MSM
[    0.314317][0] msm_serial: console setup on port #0
[    1.165312][0] console [ttyMSM0] enabled
[    1.170610][0] msm_serial: driver initialized
[    1.174487][0] msm_serial_hsl_init: driver initialized
[    1.178911][0] [loadcontrol] set auto - scale=1
[    1.183340] [avm] configured: watchdog event debug
[    1.192604][0] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0)
[    1.192933][0] [qcom_wdt] ar7wdt_hw_init...
[    1.200268][0] [qcom_wdt] [register_wdt_bark_irq] watchdog as irq(32) registered
[    1.203727][0] [qcom_wdt] [ar7wdt_hw_init] ERROR wdt_secure_irq not set in dt
[    1.237343][0] [qcom_wdt] [ar7wdt_hw_init] Wdt bark time: 320000, bite time: 640000
[    1.237587][0] Register push button event to receive the set_factory_kernel event
[    1.267685][0] AVM Simple Profiling enabled Version 3.0
[    1.268788][0] avm_net_trace: Up and running.
[    1.288212][0] brd: module loaded
[    1.296952][0] loop: module loaded
[    1.298095][0] zram: Added device: zram0
[    1.301316][0] qcom,phase property not found in dts
[    1.303322][0] QPIC platform data not populated
[    1.308107][0] QPIC controller hw version Major:2, Minor:1
[    1.312436][0] QPIC controller support serial nand.
[    1.318462][0] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xba
[    1.322768][0] nand: Winbond W25N01GWZEJG SPI NAND 1G 1.8V
[    1.329437][0] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.335476][0] [TFFS3_Register_Panic_CB] registering panic callback for mtd qcom_nand.0
[    1.342897][0] 5 ofpart partitions found on MTD device qcom_nand.0
[    1.350658][0] Creating 5 MTD partitions on "qcom_nand.0":
[    1.356902][0] 0x000000d40000-0x000001540000 : "fit0"
[    1.370925][0] 0x000000000000-0x000000540000 : "urlader"
[    1.377109][0] 0x000000540000-0x000000d40000 : "nand-tffs"
[    1.385570][0] 0x000001540000-0x000001d40000 : "fit1"
[    1.393857][0] 0x000001d40000-0x000008000000 : "ubi"
[    1.481591][0] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.484424][0] libphy: Fixed MDIO Bus: probed
[    1.707912][0] libphy: qca_mdio: probed
[    1.708700][0] qca-mdio 88000.mdio: qca-mdio driver was registered
[    1.820943][0] tun: Universal TUN/TAP device driver, 1.6
[    1.820970][0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.825666][0] PPP generic driver version 2.4.2
[    1.831995][0] NET: Registered protocol family 24
[    1.836046][0] PPTP driver version 0.8.5
[    1.841209][0] cnss: INFO: IPC Logging is disabled!
[    1.845576][0] cnss[2]: INFO: Platform driver probed successfully. plat 8ed30010 tgt 0xfffc
[    1.849984][0] cnss[41]: INFO: Platform driver probed successfully. plat 8ed38010 tgt 0xfffb
[    1.859594][0] i2c /dev entries driver
[    1.867811][0] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[    1.871096][0] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[    1.876956][0] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz
[    1.884881][0] sdhci: Secure Digital Host Controller Interface driver
[    1.893037][0] sdhci: Copyright(c) Pierre Ossman
[    1.899630][0] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.909747][0] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss
[    1.909998][0] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available
[    1.919054][0] q6v5_wcss_userpd1(8fd9e538) node found
[    1.926957][0] platform q6v5_wcss_userpd1: ssr registeration success q6v5_wcss_userpd1
[    1.931088][0] remoteproc remoteproc1: q6v5_wcss_userpd1 is available
[    1.938811][0] q6v5_wcss_userpd2(8fd9e7dc) node found
[    1.946386][0] platform q6v5_wcss_userpd2: ssr registeration success q6v5_wcss_userpd2
[    1.950448][0] remoteproc remoteproc2: q6v5_wcss_userpd2 is available
[    1.958729][0] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
[    1.964675][0] coresight-csr 6001000.csr: CSR initialized
[    1.972372][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
[    1.977883][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
[    1.985234][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
[    1.992950][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
[    2.000580][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
[    2.008206][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
[    2.015783][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
[    2.023497][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
[    2.031140][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
[    2.038774][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
[    2.046358][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
[    2.054108][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
[    2.061695][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
[    2.069335][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
[    2.076918][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
[    2.084591][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
[    2.092229][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
[    2.099987][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
[    2.107639][0] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
[    2.115321] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x06064000
[    2.122597][0] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x06064000
[    2.138875][0] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x06064000
[    2.153631][0] sps:BAM 0x06064000 is registered.[    2.160838][0] coresight-tmc 6048000.tmc: TMC initialized
[    2.165302][0] coresight-tmc 6047000.tmc: TMC initialized
[    2.170663][0] coresight-funnel 6041000.funnel: FUNNEL initialized
[    2.175802][0] coresight-funnel 6100000.funnel: FUNNEL initialized
[    2.181957][0] coresight-funnel 6120000.funnel: FUNNEL initialized
[    2.188128][0] coresight-funnel 6130000.funnel: FUNNEL initialized
[    2.194211][0] coresight-funnel 61a1000.funnel: FUNNEL initialized
[    2.201216][0] coresight-etm4x 619c000.etm: ETM 4.0 initialized
[    2.206966][0] coresight-etm4x 619d000.etm: ETM 4.0 initialized
[    2.212496][0] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
[    2.218645][0] coresight-stm 6002000.stm: STM initialized
[    2.227787][0] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
[    2.231558][0] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[    2.243770][0] AVM PA for Linux Linux version 4.4.60 (kbuild-team@jenkins-ci.avm.de) (gcc version 5.5.0 (Buildroot 2018.11.4) ) #1 SMP PREEMPT 2021-11-23
[    2.243770][0]  (late init)
[    2.247311][0] nf_conntrack version 0.5.0 (2890 buckets, 11560 max)
[    2.264201][0] gre: GRE over IPv4 demultiplexor driver
[    2.270635][0] NET: Registered protocol family 10
[    2.275956][0] sit: IPv6 over IPv4 tunneling driver
[    2.280978][0] NET: Registered protocol family 17
[    2.284335][0] Bridge broadcast ratelimiter registered
[    2.289174][0] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.294197][0] Bridge firewalling registered
[    2.306971][0] KOAM is loaded successfully.
[    2.311524][0] l2tp_core: L2TP core driver, V2.0
[    2.315355][0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.320232][0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    2.325180][0] l2tp_netlink: L2TP netlink interface
[    2.330963][0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    2.335648][0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    2.341960][0] 8021q: 802.1Q VLAN Support v1.8
[    2.349037][0] Registering SWP/SWPB emulation handler
[    2.353051][0] [fdt_get_reserved_mem_resource] mem_count = 15; search name = "avm_sbl_boot_string"
[    2.358187][0] [proc_sbl_boot_status] SBL Magic mismatch for avm_sbl_boot_string
[    2.368694][0] AppArmor: AppArmor sha1 policy hashing enabled
[    2.375542][0] Could not find Env 'kernel_args' in the device tree
[    2.380338][0] [TFFS3_Init] Called.
[    2.386251][0] [TFFS3_CACHE_Configure] Setting up caching for backend nand
[    2.389715][0] [TFFS3-CACHE] Caching module for TFFS 3.x
[    2.396581][0] [TFFS3-NAND] NAND storage backend for TFFS 3.x
[    2.710745][0] random: nonblocking pool is initialized
[    3.935405][0] [TFFS3-NAND] Initialisation successful, 64/64/64 NAND blocks active, fill rate 7%
[    3.935666][0] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0)
[    3.943336][0] Adam2 environment variables API installed.
[    3.954006][0] ubi0: attaching mtd4
[    4.408515][0] ubi0: scanning is finished
[    4.416352][0] ubi0: attached mtd4 (name "ubi", size 98 MiB)
[    4.416382][0] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.421129][0] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.428128][0] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.435219][0] ubi0: good PEBs: 790, bad PEBs: 0, corrupted PEBs: 0
[    4.442272][0] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
[    4.448448][0] ubi0: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 1145233528
[    4.456056][0] ubi0: available PEBs: 0, total reserved PEBs: 790, PEBs reserved for bad PEB handling: 40
[    4.465318][1] ubi0: background thread "ubi_bgt0d" started, PID 120
[    4.476317][0] mtd: device 5 (filesystem) set to be root filesystem
[    4.485086][0] hctosys: unable to open rtc device (rtc0)
[    4.495903][0] ALSA device list:
[    4.495928][0]   No soundcards found.
^@[    4.504424][0] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    4.507924][0] devtmpfs: mounted
[    4.512401][0] Freeing unused kernel memory: 1024K (81c00000 - 81d00000)
starting pid 127, tty '/dev/ttyMSM0': '/etc/boot.d/1'
[    4.996225][1] [hui] Initialize hardware user interface
[    5.008438][1] [avm_connect][state_machine_init] starting event worker thread
mknod: /dev/led: File exists
[    5.062541][1] [TFFS_Cache] Allocate segement buffer cache (size=2024)
[    5.062952][1] TFFS Name Table N
[Supervisor] Warning: ptest_release.service: could not resolve dependency voip.service
[Supervisor] Info: start disable_ipv6.service
[Supervisor] Info: start tffs.service
[Supervisor] Info: disable_ipv6.service exit success
ar7cfgctl[209]: load_config(ar7): open problem - factory default loaded
ar7cfgctl[217]: load_config(ar7): open problem - factory default loaded
P-Defaults: do nothing
[Supervisor] Info: tffs.service exit success
[Supervisor] Info: start rekey.service

Please press Enter to activate this console. firmwarecfg config_rekey: nop

RolandoMagico · December 5, 2022, 12:20pm

Third and last part of boot log:

[Supervisor] Info: rekey.service exit success
[Supervisor] Info: start environment.service
[Supervisor] Info: environment.service exit success
[Supervisor] Info: start cortexa9.service
[Supervisor] Info: start udev.service
No SBL ACK, Interface not present
[Supervisor] Info: start udevadm.service
[Supervisor] Info: cortexa9.service exit error
[    6.726156][0] udevd[342]: starting version 3.2.5
[    6.741115][0] udevd[342]: specified group 'tty' unknown
[    6.741558][0] udevd[342]: specified group 'dialout' unknown
[    6.745866][0] udevd[342]: specified group 'kmem' unknown
[    6.751580][0] udevd[342]: specified group 'input' unknown
[    6.756852][0] udevd[342]: specified group 'video' unknown
[    6.762338][0] udevd[342]: specified group 'audio' unknown
[    6.767892][0] udevd[342]: specified group 'lp' unknown
[    6.773144][0] udevd[342]: specified group 'disk' unknown
[    6.778334][0] udevd[342]: specified group 'cdrom' unknown
[    6.783830][0] udevd[342]: specified group 'tape' unknown
[    6.791067][0] udevd[342]: starting eudev-3.2.5
[    9.018304][0] [0]system-load  89% loadavg 0.24 0.5 0.2 - softirqs:3.12% (vchan_complete 35%) pgstat: sum=41879 free=36367 slab=1930 alloc=2159/s fault=1150/s (sleep 2)
[    9.050225][0] ssdk_switch_device_num_init[1322]:INFO:ess-switch dts node number: 1
[    9.050282][0] ssdk_dt_get_switch_node[1125]:INFO:ess-switch DT exist!
[    9.056695][0] ssdk_dt_parse_access_mode[1011]:INFO:switch_access_mode: local bus
[    9.077379][0] ssdk_dt_parse_access_mode[1024]:INFO:switchreg_base_addr: 0x39c00000
[    9.077413][0] ssdk_dt_parse_access_mode[1025]:INFO:switchreg_size: 0x200000
[    9.083841][0] ssdk_dt_parse_mac_mode[357]:INFO:mac mode = 0xf (PORT_WRAPPER_SGMII_CHANNEL0)
[    9.097836][0] ssdk_dt_parse_mac_mode[363]:INFO:mac mode1 doesn't exit!
[    9.099555][0] ssdk_dt_parse_mac_mode[373]:INFO:mac mode2 doesn't exit!
[    9.105928][0] ssdk_dt_parse_port_bmp[866]:INFO:port_bmp doesn't exist!
[    9.112710][0] ssdk_dt_parse_uniphy[396]:INFO:ess-uniphy DT exist!
[    9.119134][0] ssdk_dt_parse_led[1098]:INFO:current dts led_source_num is 0
[    9.125349][0] ssdk_plat_init start
[    9.967505][1] [1]system-load  75% loadavg 0.24 0.5 0.2 - task runtime:12% max:udevd 4%  pgstat: sum=41159 free=35647 slab=1930 alloc=2281/s fault=1150/s (sleep 1)
[   11.537278][0] ssdk_mp_reset_init[739]:INFO:MP reset successfully!
[   11.537346][0] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully!
[   11.654101][0] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded!
[   11.654520][0] regi_init[4100]:INFO:Initializing SCOMPHY!
[   18.897547][0] ssdk_switch_register[1957]:INFO:Chip version 0xee
[   18.897599][0] qca_link_polling_select[1556]:INFO:link-polling-required node does not exist
[   18.902614][0] ssdk_switch_register[1991]:INFO:polling is selected
[   18.910793][0] regi_init[4124]:INFO:Initializing SCOMPHY Done!!
[   18.918143][0] regi_init[4160]:INFO:qca-ssdk module init succeeded!
[   18.936513][1] scm_call failed: func id 0x2000502 ret: -1 syscall returns: 0x2, 0x193d224, 0x5050505
[   18.936549][1] nss_dp_hal_tcsr_set: SCM TCSR write error: -5
[   18.946692][1] nss-dp 39c00000.dp1 eth0: Init NSS DP GMAC1 (base = 0x39c00000)
[   18.950630][1] **********************************************************
[   18.957464][1] * NSS Data Plane driver
[   18.964234][1] **********************************************************
[   19.031743][0] [0]system-load  62% loadavg 0.51 0.11 0.4 - task runtime:33% max:udevd 33%  pgstat: sum=43056 free=37301 slab=1948 alloc=343/s (sleep 0)
[   19.106643] Set mem profile via device tree
[   19.264791][0] nss_driver - fw of size 737828  bytes copied to load addr: 40000000, nss_id : 0
[   19.266220] Supported Frequencies -
[   19.272516][0] 850 MHz 1 GHz
[   19.278374][0]
[   19.279186][0] 7f917680: set sdma 8e90ad00
[   19.281096][0] node size 2 # items 4
[   19.284781][0] memory: 40000000 268435456 (avl 203407360) items 4 active_cores 1
[   19.288581][0] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000
[   19.295894][0] 7f917680: NSS core 0 DDR from 40000000 to 40800000
[   19.303047][0] 7f917680: meminfo init succeed
[Supervisor] Info: udevadm.service exit success
[Supervisor] Info: start flash-update.service
[   19.339280][0] node size 2 # items 4
[   19.339312][0] memory: 40000000 268435456 (avl 203407360) items 4 active_cores 1
[   19.341932][0] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000
[   19.349371][0] 7f917680: nss core 0 booted successfully
[Supervisor] Info: flash-update.service exit success
[Supervisor] Info: start oemcheck.service
[Supervisor] Error: could not start: /etc/boot.d/core/oemcheck
[Supervisor] execvp returned: No such file or directory
[Supervisor] Info: oemcheck.service exit error
[Supervisor] Info: start watchdog.service
[   19.435491][0] AVM_WATCHDOG: System Init Ueberwachung 120 Sekunden
[Supervisor] Info: watchdog.service exit success
[Supervisor] Info: start capi-config.service
[Supervisor] Info: start piglet.service
[Supervisor] Info: capi-config.service exit success
[Supervisor] Info: piglet.service exit error
[Supervisor] Info: start capi.service
[Supervisor] Info: start modules-load.service
[Supervisor] Info: capi.service exit success
modprobe: FATAL: Module kdsldmod not found in directory /lib/modules/4.4.60
[ERROR] Failed to load kernel module kdsldmod
[   19.528801][0] avm_pa: try to activate hw accelaration for pid 5 (eth0) called from notifier_fn [offload_pa]
[   19.547011][0] cprocfsmod: module license 'unspecified' taints kernel.
[   19.547043][0] Disabling lock debugging due to kernel taint
[   19.556410][0] cchardevice: loaded
[   19.637059][0] krextd: Initialisation of debughandles ...
[   19.637098][0] krextd: Initialisation of debughandles [OK]
[   19.641575][0] krextd: Initialisation of procfs ...
[   19.646871][0] krextd: Initialisation of procfs [OK]
[   19.651690][0] krextd: Initialisation of kmod_debugctl ...
[   19.656852][0] krextd: Initialisation of kmod_debugctl [OK]
[   19.662168][0] krextd: Initialisation of cenv ...
[   19.667782][0] krextd: Initialisation of cenv [OK]
[   19.672467][0] krextd: Initialisation of ctimer ...
[   19.677452][0] krextd: Initialisation of ctimer [OK]
[   19.682505][0] krextd: Initialisation of kmodcmddev ...
[   19.687163][0] krextd: Initialisation of kmodcmddev [OK]
[   19.692132][0] krextd: Initialisation of packettrace ...
[   19.697781][0] krextd: Initialisation of packettrace [OK]
[   19.702951][0] krextd: Initialisation of nqos ...
[   19.709672][0] krextd: Initialisation of nqos [OK]
[   19.712926][0] krextd: Initialisation of bridgeflt ...
[   19.717703][0] krextd: Initialisation of bridgeflt [OK]
[   19.722725][0] krextd: Initialisation of timer ...
[   19.727914][0] krextd: Initialisation of timer [OK]
[   19.732698][0] krextd: Initialisation of krextd ...
[   19.737529][0] krextd: Initialisation of krextd:debughandles ...
[   19.742344][0] krextd: Initialisation of krextd:debughandles [OK]
[   19.748629][0] krextd: Initialisation of krextd:global ...
[   19.754598][0] krextd: Initialisation of krextd:global [OK]
[   19.759994][0] krextd: Initialisation of krextd:memcache ...
[   19.765512][0] krextd: Initialisation of krextd:memcache [OK]
[   19.771368][0] krextd: Initialisation of krextd:igmpcompr ...
[   19.777182][0] krextd: Initialisation of krextd:igmpcompr [OK]
[   19.782744][0] krextd: Initialisation of krextd:krextdev ...
[   19.788462][0] krextd: Initialisation of krextd:krextdev [OK]
[   19.794242][0] krextd: Initialisation of krextd:krextdev_wland ...
[   19.799935][0] krextd: Initialisation of krextd:krextdev_wland [OK]
[   19.805978][0] krextd: Initialisation of krextd:netdevice_notifier ...
[   19.812168][0] krextd: Initialisation of krextd:netdevice_notifier [OK]
[   19.818749][0] krextd: Initialisation of krextd:krextdprocfs ...
[   19.825279][0] krextd: Initialisation of krextd:krextdprocfs [OK]
[   19.831526][0] krextd: Initialisation of krextd:krextdtimer ...
[   19.837518][0] krextd: Initialisation of krextd:krextdtimer [OK]
[   19.843202][0] krextd: Initialisation of krextd [OK]
[   19.849495][0] krextd: Initialisation [OK]
[Supervisor] Info: modules-load.service exit success
[Supervisor] Info: start devnodes.service
[Supervisor] Info: devnodes.service exit success
[Supervisor] Info: start apparmor.service
[Supervisor] Info: start filesystem.service
[Supervisor] Info: start maple_eee.service
[Supervisor] Info: apparmor.service exit success
[   20.179030][1] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 494
[   20.207741][1] UBIFS (ubi0:3): recovery needed
[   20.228200][1] UBIFS (ubi0:3): recovery completed
[   20.228354][1] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "avm_update"
[   20.231883][1] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   20.239859][1] UBIFS (ubi0:3): FS size: 32378880 bytes (30 MiB, 255 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs)
[   20.250168][1] UBIFS (ubi0:3): reserved for root: 1529334 bytes (1493 KiB)
[   20.260654][1] UBIFS (ubi0:3): media format: w4/r0 (latest is w4/r0), UUID 4D982A8D-3953-4B0B-A94B-41A2A37A371A, small LPT model
tx-timer unmodified, ignoring
[Supervisor] Info: maple_eee.service exit success
[INFO] /dev/ubi0_3 mounted at /var/update
[Supervisor] Info: filesystem.service exit success
[Supervisor] Info: start default-files.service
[   20.346103][1] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
[   20.346236][1] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=82 mul=29 div=10 offset=0 NormP=290 mW -> SumNormP=290 mW
[   20.359269][1] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=1500 NormP=1500 mW -> SumNormP=1790 mW
[   20.374212][1] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=0 mul=400 div=10 offset=500 NormP=4500 mW -> SumNormP=6290 mW
[   20.389187][1] [avm_power]pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=617 act_rate=16777216 mul=1 div=1 offset=50 NormP=667 mW -> SumNormP=6957 mW
[Supervisor] Info: default-files.service exit success
[Supervisor] Info: start config.service
[Supervisor] Info: start debug.service
[Supervisor] Info: start sysctl.service
net.ipv4.tcp_min_snd_mss = 536
dev.nss.rps.enable = 1
dev.nss.general.redirect = 1
dev.nss.stats.non_zero_stats = 1
dev.nss.general.logbuf = 128
[   20.468020][0] Enabling NSS SPI Debug
dev.nss.general.debug = 1
[   20.473358][0] configuring additional NSS pbufs
[   20.484925][0] additional pbufs of size 1400832 got added to NSS
dev.nss.n2hcfg.extra_pbuf_core0 = 1400000
dev.nss.n2hcfg.n2h_high_water_core0 = 16384
kernel.panic_on_oops = 1
vm.panic_on_oom = 2
kernel.printk = 4
net.ipv4.ip_forward = 1
net.ipv4.tcp_min_tso_segs = 100
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
[Supervisor] Info: sysctl.service exit success
[   20.519299] sysrq: SysRq : Changing Loglevel
[   20.521167][1] sysrq: Loglevel set to 4
[Supervisor] Info: config.service[   20.524644][1]
[   20.524644][1] [avm_debug] redirecting kernel-messages (/dev/debug)
 exit success
[Supervisor] Info: debug.service exit success
[Supervisor] Info: start avmipcd.service
[Supervisor] Info: start boxnotify.service
[Supervisor] Info: start inetd.service
[Supervisor] Info: start psupport-init-prenet.service
[Supervisor] Info: start run_clock.service
[Supervisor] Info: start unexpected-reboot.service
[Supervisor] Info: inetd.service exit success
[Supervisor] Info: avmipcd.service exit success
[Supervisor] Info: start avmnexusd.service
[Supervisor] Info: start psetd.service
[Supervisor] Info: boxnotify.service exit success
run_clock demon started

[Supervisor] Info: run_clock.service exit success
cat: can't open '/sys/kernel/debug/qcom_debug_logs/tz_log_last': No such file or directory
[Supervisor] Info: unexpected-reboot.service exit success
[Supervisor] Info: psupport-init-prenet.service exit success
[Supervisor] Info: start net.service
/etc/ewnw_devfiles.sh: checking /dev files ....
/etc/ewnw_devfiles.sh: /dev/kdsldptrace0 already exists
/etc/ewnw_devfiles.sh: /dev/kdsldptrace1 already exists
/etc/ewnw_devfiles.sh: mknod /dev/knqos c 234 0
/etc/ewnw_devfiles.sh: mknod /dev/avmtrackd c 233 0
/etc/ewnw_devfiles.sh: mknod /dev/avmtrackdquery c 232 0
/etc/ewnw_devfiles.sh: mknod /dev/bridgeflt c 231 0
/etc/ewnw_devfiles.sh: mknod /dev/krextd c 230 0
/etc/ewnw_devfiles.sh: mknod /dev/krextd_wlan c 229 0
/etc/ewnw_devfiles.sh: /dev files checked
[Supervisor] Info: psetd.service exit success
avmnexusd[532]: starting ... (normal)
1970-01-01 01:00:21 avmnexusd[532]: ready (0sec)
[Supervisor] Info: avmnexusd.service exit success
l2tpv3d[639]: starting ... (normal)
1970-01-01 01:00:21 l2tpv3d[639]: ready (0sec)
l2tpv3d[643]: started.
l2tpv3d[643]: verbose: DISABLED
ctlmgr[648]: pcpc_create_ctx: no pcpserver found
upnpd[653]: starting ... (normal)
1970-01-01 01:00:21 upnpd[653]: ready (0sec)
sh: can't create /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state: Permission denied
rextd[719]: starting ... (normal)
1970-01-01 01:00:23 rextd[719]: ready (1sec)
rc.wlan: Start WLAN...
ctlmgr[650]: WLANLIB: wlan_plugin_init:882: prj revision 0xd31c016
ctlmgr[650]: WLANLIB: wlan_libs_nexus_init:260: Get Nexus info failed: try again later.
WLAND:[00742]:01:00.23/[0023.310]:[VER]Registered new module default, DEFAULT, 0
WLAND:[00742]:01:00.23/[0023.310]:[VER]Registered new module global, GLOBAL, 0
WLAND:[00742]:01:00.23/[0023.310]:[ALW]BUILD: Dec 15 2021, 11:37:50
deviceinfod[746]: starting ... (normal)
1970-01-01 01:00:23 deviceinfod[746]: ready (0sec)
[Supervisor] Info: net.service exit success
[Supervisor] Info: start kpid.service
[Supervisor] Info: start meshd.service
[Supervisor] Info: start ptest_release.service
kpid: Sending section usb failed with error -1:
sysfs_usb 1 {"sv":"gen/v1","kpi":{}}
kpid: Sending section hwpa failed with error -1:
sysfs_hwpa 1 {"sv":"gen/v1","kpi":{}}
kpid: Sending section system failed with error -1:
sysfs_system 1 {"sv":"gen/v1","kpi":{"temperatures":{"tsens_tz_sensor1_avg":null,"tsens_tz_sensor1_max":null,"tsens_tz_sensor1_min":null,"tsens_tz_sensor2_avg":null,"tsens_tz_sensor2_max":null,"tsens_tz_sensor2_min":null,"tsens_tz_sensor3_avg":null,"tsens_tz_sensor3_max":null,"tsens_tz_sensor3_min":null,"tsens_tz_sensor4_avg":null,"tsens_tz_sensor4_max":null,"tsens_tz_sensor4_min":null}}}
[Supervisor] Info: ptest_release.service exit success
[Supervisor] Info: start configd.service
[Supervisor] Info: configd.service exit success
ctlmgr[650]: WLANLIB: wcsi_socket_connect:313: Establishing RPC connection failed with TIMEOUT
meshd[751]: LOG: main: Hello from meshd.
meshd[751]: starting ... (normal)
meshd[770]: verbose: DISABLED
1970-01-01 01:00:24 meshd[751]: ready (0sec)
[Supervisor] Info: meshd.service exit success
[Supervisor] Info: start meshd_config.service
[Supervisor] Info: meshd_config.service exit success
[Supervisor] Info: all Services loaded.
ctlmgr[650]: /var/flash/fwupdatetrace.cfg: is empty
ctlmgr[650]: /var/flash/fwupdatetrace.cfg: is empty
ctlmgr[650]: /var/flash/fwupdatetrace.cfg: is empty
ctlmgr[650]: /var/flash/fwupdatetrace.cfg: is empty
ctlmgr[650]: /var/flash/fwupdatetrace.cfg: is empty
ctlmgr[650]: /var/flash/fwupdatetrace.cfg: is empty
meshd[770]: wlancsi_control: Request for get_roles failed. Task status is: TIMEOUT
meshd[770]: wlancsi_control: Get roles failed! (Event registration will fail as well.): task timeout: Operation timed out
l2tpv3d[808]: starting ... (normal)
l2tpv3d[810]: [810] Start failed
rc.wlan: Start WLAN...
rc.wlan start: WLAN daemon already running
Actual changes:
generic-segmentation-offload: on
----acfg_wpa_supp_add_interface ----- 1087-----
----acfg_wpa_supp_add_interface ----- 1176-----
acfg_hostapd_modify_bss: Hostapd delete error
----acfg_wpa_supp_add_interface ----- 1087-----
----acfg_wpa_supp_add_interface ----- 1176-----
acfg_hostapd_modify_bss: Hostapd delete error

andyboeh · December 5, 2022, 12:54pm

The IPQ5010 is not supported by OpenWrt so quite a lot of work would be required.

slh · December 5, 2022, 11:07pm

If I read the RAM size correctly, 256 MB RAM would be a hard no-go area (with ath11k, 512 MB RAM are already tight), beyond what andyboeh has already mentioned (there's very, very little mainline support for ipq50xx - and ipq807x && ipq60xx support would be needed to build upon first).

RolandoMagico · January 13, 2023, 7:07am

Thanks for the information. I won’t continue work on this device.
If someone wants to go on:

The case can be opened with a T6 screwdriver
UART is next to the Ethernet connector
Pin assignment (from inner to outer pin):
RX
GND
TX
VCC

system · July 9, 2023, 9:34pm

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.