Stuck on "jumping AARCH64 kernel to via monitor"

testing a dr6018 board, manuaylly flashing

tftpboot openwrt-dr6018.itb
bootm 0x44000000

It always stuck on "jumping AARCH64 kernel to via monitor"

any ideas?

Did you talk to your supplier?
OpenWrt does not support this device yet (and ipq60xx support in general is still rather early/ source-only).

It appears you are using firmware that is not from the official OpenWrt project.

When using forks/offshoots/vendor-specific builds that are "based on OpenWrt", there may be many differences compared to the official versions (hosted by Some of these customizations may fundamentally change the way that OpenWrt works. You might need help from people with specific/specialized knowledge about the firmware you are using, so it is possible that advice you get here may not be useful.

You may find that the best options are:

  1. Install an official version of OpenWrt, if your device is supported (see
  2. Ask for help from the maintainer(s) or user community of the specific firmware that you are using.
  3. Provide the source code for the firmware so that users on this forum can understand how your firmware works (OpenWrt forum users are volunteers, so somebody might look at the code if they have time and are interested in your issue).

If you believe that this specific issue is common to generic/official OpenWrt and/or the maintainers of your build have indicated as such, please feel free to clarify.

yeah in moving it to openwrt, vendor said it was config-3.5, where its actually config-cp.3.1 issue resolved now. moving forward

This topic was automatically closed after 22 hours. New replies are no longer allowed.