Enable this
On the main router, I suppose?
Also, which zone?
The traffic flow atm:
Your pc->primary router lanint->secondary router lanint->server50 and backwards, server50->secondary router 50int->your pc.
Matti
Main router
You have wan and lan, take a wild guess...
Hey guys,
I had a simililar problem with more than one router and I think it helped to allow invalid traffic in the "LAN-Firewall-Zone". - But could you please explain it a bit more and I think my network traffic isn't opitmized. The network feels very laggy and udp-traffic is somehow not clear within the LAN.
Or Masquerade on the lan zone of the secondary router?
It won't make any difference if the initiator is the first router lan device.
One direction is:
host A -> router 1 -> router 2 -> host B
the other direction is:
host B -> router 2 -> host A
Router 1 never gets the response and believes the next packet from host A is invalid/out of order.
You are absolutely right it was late last night.
I can remember (but might be wrong) mitigating this by masquerading traffic which comes in to the router via the lan and goes out again, that is what I meant.
So traffic will not come from the client but from the router and goes back to the router.
If not it will have another address and can be classified as invalid.
1 Like