I'm on a Linksys WRT1900acs v2. When 19.07.1 first released, I was previously running all these packages on this device on this version with no issues. I had been playing around with different packages and finally settled on a format I wanted. At that time I chose to do an advanced reboot to the other partition which houses stock Linksys firmware. I then installed a fresh 19.07.1. on the other partition. When I attempted to install the above packages I got the following errors for each:
Collected errors:
* check_data_file_clashes: Package luci-compat wants to install file /usr/lib/lua/luci/tools/webadmin.lua
But that file is already provided by package * luci-base
* opkg_install_cmd: Cannot install package luci-app-sqm.
Collected errors:
* check_data_file_clashes: Package luci-compat wants to install file /usr/lib/lua/luci/tools/webadmin.lua
But that file is already provided by package * luci-base
* opkg_install_cmd: Cannot install package luci-app-advanced-reboot.
Collected errors:
* check_data_file_clashes: Package luci-compat wants to install file /usr/lib/lua/luci/tools/webadmin.lua
But that file is already provided by package * luci-base
* opkg_install_cmd: Cannot install package luci-app-nextdns.
Could anyone please help me to remedy this issue? Thanks in advance!
Running 19.07.2 since couple hours on a Linksys WRT32X and having same issue with installing advanced reboot:
Collected errors:
check_data_file_clashes: Package luci-compat wants to install file /usr/lib/lua/luci/tools/webadmin.lua
But that file is already provided by package * luci-base
check_data_file_clashes: Package luci-compat wants to install file /usr/lib/lua/luci/tools/webadmin.lua
But that file is already provided by package * luci-base
I mean, I'm not 100% versed in this whole thing but I think maybe building your own using the OpenWRT image builder may well alleviate these incompatibility issues - especially if you stipulate in the arguments to install advanced reboot in the build.
I stand corrected. The issues remain. For now I’ve just checked the overwrite box on packages that would not upgrade otherwise and everything seems to be working normally however the error of my screenshot below still occurs on several packages.
I noticed the same thing today on a WRT1900AC v.1 running 19.07.1. It only happened in Luci. When I ran an opkg upgrade in an SSH session it didn't have a problem.