Well... I attached a serial cable to see the logs.
It seems that it's not the disk causing the error. The last lines are:
[ 4.738493] urandom-seed: Seeding with /etc/urandom.seed
[ 4.771441] procd: - early -
[ 4.774422] procd: - watchdog -
[ 5.317011] procd: - watchdog -
[ 5.321765] procd: - ubus -
And then reboot.
Here is the full log:
U-Boot 2009.08-svn54115 (Nov 15 2011 - 10:54:56), Build: 0.0.12
CPU: AMCC PowerPC 4APM82181 Rev. E at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
Security support
Bootstrap Option E - Boot ROM Location NOR/SRAM (8 bits)
32 kB I-Cache 32 kB D-Cache
Board: Apollo-3G - APM82181 Board, 2*SATA, 1*USB
I2C: ready
DRAM: Auto calibration - \|/-\|/-\ \|/-\|/-\256 MB
FLASH: 512 kB
DTT: 1 FAILED INIT
Net: PHY EC1 Register: 0x2c8c
ppc_4xx_eth0
Type run flash_nfs to mount root filesystem over NFS
e[44me[37mp=============================================================================q
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::WWWWWWWWW::::WWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDD::::::::::::|
|:::::::::::WWWWWWWW::::WWWWWWWW:::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDD::::::::::|
|:::::::::::WWWWWWWW:::WWWWWWWWW::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDDDD:::::::::|
|::::::::::::::::::::::::::::::::::::::::::::::::::::::::::DDDDDDDDDDD::::::::|
|:::::::::::WWWWWWW:::WWWWWWWWWW::::WWWWWWW::DDDDDDDDD:::::::DDDDDDDDD::::::::|
|:::::::::::WWWWWWW::WWWWWWWWWWW:::WWWWWWW::DDDDDDDDD::::::::DDDDDDDDD::::::::|
|:::::::::::WWWWWW::WWWWWW::WWWWW:WWWWWWW::DDDDDDDDDD:::::::DDDDDDDDDD::::::::|
|:::::::::::WWWWWWWWWWWWW:::WWWWWWWWWWWW::DDDDDDDDDD::::::DDDDDDDDDDD:::::::::|
|:::::::::::WWWWWWWWWWWW::::WWWWWWWWWWW::DDDDDDDDDDD:::DDDDDDDDDDDDD::::::::::|
|:::::::::::WWWWWWWWWWW:::::WWWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDDD::::::::::::|
|:::::::::::WWWWWWWWWW::::::WWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDD::::::::::::::|
|:::::::::::WWWWWWWWW:::::::WWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDD::::::::::::::::|
|:::::::::::WWWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDD:::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
b=============================================================================de[40m e[37m
Hit any key to stop autoboot: 1 0
USB: OTG-Controller ID(0x4F54) Version(0x290A)
Err detect usb time out hostport.d32 0x00001000
0 USB Device(s) found
scanning bus for storage devices...
0 Storage Device(s) found
** Block device usb 0 not supported
Board is not configured for test. Do normal boot.
----- Checking Boot Partitions -----
SATA DWC initialization 0
init: Waiting for device...
sata_dwc: Device found
scan: Waiting for device...
SATA DWC initialization 1
init: Waiting for device...
sata_dwc: Device found
scan: Waiting for device...
supports DRM functions and may not be fully accessable.
Loading file "/boot/boot.scr" from sata device 1:1 (hdb1)
624 bytes read
1:1
## Executing script at 00100000
SATA DWC initialization 0
init: Waiting for device...
sata_dwc: Device found
scan: Waiting for device...
SATA DWC initialization 1
init: Waiting for device...
sata_dwc: Device found
scan: Waiting for device...
supports DRM functions and may not be fully accessable.
Loading file "/boot/uImage" from sata device 1:1 (hdb1)
2738039 bytes read
Loading file "/boot/apollo3g.dtb" from sata device 1:1 (hdb1)
16384 bytes read
Loaded part 1
## Booting kernel from Legacy Image at 01000000 ...
Image Name: POWERPC OpenWrt Linux-4.14.50
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 2737975 Bytes = 2.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Uncompressing Kernel Image ... OK
Loading Device Tree to 00ff9000, end 00ffffff ... OK
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] Linux version 4.14.50 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6984-fa0275b)) #0 Fri Jun 22 10:22:57 2018
[ 0.000000] Using PowerPC 44x Platform machine description
[ 0.000000] Found legacy serial port 0 for /plb/opb/serial@ef600300
[ 0.000000] mem=4ef600300, taddr=4ef600300, irq=0, clk=7407407, speed=0
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x10000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x0000000010100040
[ 0.000000] possible = 0x0000000030100040
[ 0.000000] always = 0x0000000000100000
[ 0.000000] cpu_user_features = 0x8c008000 0x00000000
[ 0.000000] mmu_features = 0x00000008
[ 0.000000] -----------------------------------------------------
[ 0.000000] Top of RAM: 0x10000000, Total RAM: 0x10000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c055ba30, node_mem_map cfded000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/sda2 rw rootfstype=ext4 console=ttyS0,115200
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 253952K/262144K available (4584K kernel code, 208K rwdata, 572K rodata, 188K init, 243K bss, 8192K reserved, 0K cma-reserved)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffdf000..0xfffff000 : fixmap
[ 0.000000] * 0xfde00000..0xfe000000 : consistent mem
[ 0.000000] * 0xfde00000..0xfde00000 : early ioremap
[ 0.000000] * 0xd1000000..0xfde00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000000] time_init: decrementer frequency = 800.000008 MHz
[ 0.000000] time_init: processor frequency = 800.000008 MHz
[ 0.000015] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.010284] clocksource: timebase mult[1400000] shift[24] registered
[ 0.016592] clockevent: decrementer mult[ccccccef] shift[32] cpu[0]
[ 0.022858] pid_max: default: 32768 minimum: 301
[ 0.027539] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.034064] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.044084] random: get_random_u32 called from 0xc01feab8 with crng_init=0
[ 0.051161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.060829] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.067669] NET: Registered protocol family 16
[ 0.074264] PPC4XX OCM1: 32768 Bytes (enabled)
[ 0.078624] PPC4XX OCM1: 32768 Bytes (non-cached)
[ 0.083283] PPC4XX OCM1: 0 Bytes (cached)
[ 0.087318] debugfs ppc4xx ocm: failed to create file
[ 0.092450] 256k L2-cache enabled
[ 0.095766] PCIE0: Port disabled via device-tree
[ 0.100938] PCI: Probing PCI hardware
[ 0.113468] SCSI subsystem initialized
[ 0.117633] libata version 3.00 loaded.
[ 0.123020] clocksource: Switched to clocksource timebase
[ 0.128987] NET: Registered protocol family 2
[ 0.133730] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.140623] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.146911] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.153285] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.159040] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.165368] NET: Registered protocol family 1
[ 0.169668] PCI: CLS 0 bytes, default 32
[ 0.176291] dw_dmac 4bffd0800.dma: DesignWare DMA Controller, 2 channels
[ 0.187199] Crashlog allocated RAM at address 0x3f00000
[ 0.192872] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 0.203267] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.217986] io scheduler noop registered
[ 0.221831] io scheduler deadline registered (default)
[ 0.227204] GPIO line 472 (enable EMAC PHY) hogged as output/low
[ 0.233128] GPIO line 473 (Enable Reset Button, disable NOR) hogged as output/low
[ 0.240547] GPIO line 474 (Power USB Core) hogged as output/low
[ 0.246422] GPIO line 475 (Power Drive Port 1) hogged as output/low
[ 0.252643] GPIO line 479 (Power Drive Port 0) hogged as output/low
[ 0.259624] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.267636] console [ttyS0] disabled
\CA[ 0.291219] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 19, base_baud = 462962) is a U6_16550A
[ 0.300001] console [ttyS0] enabled
[ 0.300001] console [ttyS0] enabled
[ 0.306894] bootconsole [udbg0] disabled
[ 0.306894] bootconsole [udbg0] disabled
[ 0.315202] console [ttyS0] disabled
[ 0.318820] console [ttyS0] enabled
[ 0.322779] sata-dwc 4bffd1000.sata: id 0, controller version 1.91
[ 0.332723] scsi host0: sata-dwc
[ 0.336187] ata1: SATA max UDMA/133 irq 33
[ 0.340409] sata-dwc 4bffd1800.sata: id 0, controller version 1.91
[ 0.347536] scsi host1: sata-dwc
[ 0.350937] ata2: SATA max UDMA/133 irq 34
[ 0.355453] of-flash 4fff80000.nor_flash: do_map_probe() failed for type cfi_probe
[ 0.363666] of-flash 4fff80000.nor_flash: do_map_probe() failed
[ 0.370212] libphy: Fixed MDIO Bus: probed
[ 0.374310] PPC 4xx OCP EMAC driver, version 3.54
[ 0.379303] MAL v2 /plb/mcmal, 1 TX channels, 1 RX channels
[ 0.385059] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
[ 0.392204] TAH /plb/opb/emac-tah@ef601350 initialized
[ 0.397636] /plb/opb/emac-rgmii@ef601500: input 0 in rgmii mode
[ 0.403650] libphy: emac_mdio: probed
[ 0.519767] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:90:a9:3d:80:c1
[ 0.526641] eth0: found Broadcom BCM50610 PHY (0x01)
[ 0.531671] i2c /dev entries driver
[ 0.535262] booke_wdt: powerpc book-e watchdog driver loaded
[ 0.541345] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.552920] NET: Registered protocol family 10
[ 0.558864] Segment Routing with IPv6
[ 0.562610] NET: Registered protocol family 17
[ 0.567082] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.579993] 8021q: 802.1Q VLAN Support v1.8
[ 0.685793] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.694343] ata1.00: ATA-9: Samsung SSD 840 Series, DXT09B0Q, max UDMA/133
[ 0.701208] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 1/32)
[ 0.710313] ata1.00: configured for UDMA/133
[ 0.714929] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 9B0Q PQ: 0 ANSI: 5
[ 0.723079] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.730093] ata1.00: Enabling discard_zeroes_data
[ 0.735561] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 0.743187] sd 0:0:0:0: [sda] Write Protect is off
[ 0.747977] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.753051] ata2.00: supports DRM functions and may not be fully accessible
[ 0.760003] ata2.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133
[ 0.767118] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 1/32)
[ 0.773868] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.782882] sata-dwc 4bffd1800.sata: sata_dwc_isr: DMA not pending intpr=0x80000080 status=0x00000050 pending=0
[ 0.782917] sata-dwc 4bffd1800.sata: sata_dwc_clear_dmacr DMA protocol RX and TX DMA not pending tag=0x1f pending=0 dmacr: 0x00000006
[ 0.782923] sata-dwc 4bffd1800.sata: DMA not pending tag=0x1f pending=0
[ 0.782931] sata-dwc 4bffd1800.sata: sata_dwc_dma_xfer_complete DMA protocol RX and TX DMA not pending dmacr: 0x00000004
[ 0.822456] sata-dwc 4bffd1800.sata: sata_dwc_isr: DMA not pending intpr=0x80000080 status=0x00000050 pending=0
[ 0.832525] sata-dwc 4bffd1800.sata: sata_dwc_clear_dmacr DMA protocol RX and TX DMA not pending tag=0x1f pending=0 dmacr: 0x00000006
[ 0.844468] sata-dwc 4bffd1800.sata: DMA not pending tag=0x1f pending=0
[ 0.851052] sata-dwc 4bffd1800.sata: sata_dwc_dma_xfer_complete DMA protocol RX and TX DMA not pending dmacr: 0x00000004
[ 0.861976] sata-dwc 4bffd1800.sata: sata_dwc_isr: DMA not pending intpr=0x80000080 status=0x00000050 pending=0
[ 0.872042] sata-dwc 4bffd1800.sata: sata_dwc_clear_dmacr DMA protocol RX and TX DMA not pending tag=0x1f pending=0 dmacr: 0x00000006
[ 0.883988] sata-dwc 4bffd1800.sata: DMA not pending tag=0x1f pending=0
[ 0.890572] sata-dwc 4bffd1800.sata: sata_dwc_dma_xfer_complete DMA protocol RX and TX DMA not pending dmacr: 0x00000004
[ 0.901994] ata1.00: Enabling discard_zeroes_data
[ 0.906932] ata2.00: supports DRM functions and may not be fully accessible
[ 0.914278] sata-dwc 4bffd1800.sata: sata_dwc_isr: DMA not pending intpr=0x80000080 status=0x00000050 pending=0
[ 0.924357] sata-dwc 4bffd1800.sata: sata_dwc_clear_dmacr DMA protocol RX and TX DMA not pending tag=0x1f pending=0 dmacr: 0x00000006
[ 0.936303] sata-dwc 4bffd1800.sata: DMA not pending tag=0x1f pending=0
[ 0.942887] sata-dwc 4bffd1800.sata: sata_dwc_dma_xfer_complete DMA protocol RX and TX DMA not pending dmacr: 0x00000004
[ 0.953813] sata-dwc 4bffd1800.sata: sata_dwc_isr: DMA not pending intpr=0x80000080 status=0x00000050 pending=0
[ 0.963924] sata-dwc 4bffd1800.sata: sata_dwc_clear_dmacr DMA protocol RX and TX DMA not pending tag=0x1f pending=0 dmacr: 0x00000006
[ 0.975874] sata-dwc 4bffd1800.sata: DMA not pending tag=0x1f pending=0
[ 0.982458] sata-dwc 4bffd1800.sata: sata_dwc_dma_xfer_complete DMA protocol RX and TX DMA not pending dmacr: 0x00000004
[ 0.993408] sata-dwc 4bffd1800.sata: sata_dwc_isr: DMA not pending intpr=0x80000080 status=0x00000050 pending=0
[ 1.003516] sata-dwc 4bffd1800.sata: sata_dwc_clear_dmacr DMA protocol RX and TX DMA not pending tag=0x1f pending=0 dmacr: 0x00000006
[ 1.015463] sata-dwc 4bffd1800.sata: DMA not pending tag=0x1f pending=0
[ 1.022047] sata-dwc 4bffd1800.sata: sata_dwc_dma_xfer_complete DMA protocol RX and TX DMA not pending dmacr: 0x00000004
[ 1.032902] ata2.00: configured for UDMA/133
[ 1.037460] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 1.046567] sda: sda1 sda2 sda3
[ 1.050409] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.058612] ata1.00: Enabling discard_zeroes_data
[ 1.063628] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.068428] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.073973] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.078655] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.089041] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.093950] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.098643] md: Waiting for all devices to be available before autodetect
[ 1.105416] md: If you don't use raid, use raid=noautodetect
[ 1.111451] md: Autodetecting RAID arrays.
[ 1.115558] md: autorun ...
[ 1.118348] md: ... autorun DONE.
[ 1.125507] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 1.135417] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 1.142504] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 1.149105] Freeing unused kernel memory: 188K
[ 1.179642] init: Console is alive
[ 1.183205] init: - watchdog -
[ 1.206196] random: fast init done
[ 1.227511] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.247503] usbcore: registered new interface driver usbfs
[ 1.253047] usbcore: registered new interface driver hub
[ 1.258419] usbcore: registered new device driver usb
[ 1.275070] usbcore: registered new interface driver usb-storage
[ 1.281449] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 1.298966] init: - preinit -
[ 1.416769] eth0: link is down
[ 1.420303] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1.436889] random: procd: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 3.518253] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.520198] mount_root: mounting /dev/root
[ 4.526234] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 4.531385] mount_root: loading kmods from internal overlay
[ 4.549144] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 4.556862] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 4.684202] block: attempting to load /etc/config/fstab
[ 4.690718] block: extroot: not configured
[ 4.713917] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[ 4.729622] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 4.738493] urandom-seed: Seeding with /etc/urandom.seed
[ 4.771441] procd: - early -
[ 4.774422] procd: - watchdog -
[ 5.317011] procd: - watchdog -
[ 5.321765] procd: - ubus -
U-Boot 2009.08-svn54115 (Nov 15 2011 - 10:54:56), Build: 0.0.12
CPU: AMCC PowerPC 4APM82181 Rev. E at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
Security support
Bootstrap Option E - Boot ROM Location NOR/SRAM (8 bits)
32 kB I-Cache 32 kB D-Cache
Board: Apollo-3G - APM82181 Board, 2*SATA, 1*USB
I2C: ready
DRAM: Auto calibration - \|/-\|/-\ \|/-\|/-\256 MB
FLASH: 512 kB
DTT: 1 FAILED INIT
Net: PHY EC1 Register: 0x2c8c
ppc_4xx_eth0
Type run flash_nfs to mount root filesystem over NFS
e[44me[37mp=============================================================================q
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::WWWWWWWWW::::WWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDD::::::::::::|
|:::::::::::WWWWWWWW::::WWWWWWWW:::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDD::::::::::|
|:::::::::::WWWWWWWW:::WWWWWWWWW::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDDDD:::::::::|
|::::::::::::::::::::::::::::::::::::::::::::::::::::::::::DDDDDDDDDDD::::::::|
|:::::::::::WWWWWWW:::WWWWWWWWWW::::WWWWWWW::DDDDDDDDD:::::::DDDDDDDDD::::::::|
|:::::::::::WWWWWWW::WWWWWWWWWWW:::WWWWWWW::DDDDDDDDD::::::::DDDDDDDDD::::::::|
|:::::::::::WWWWWW::WWWWWW::WWWWW:WWWWWWW::DDDDDDDDDD:::::::DDDDDDDDDD::::::::|
|:::::::::::WWWWWWWWWWWWW:::WWWWWWWWWWWW::DDDDDDDDDD::::::DDDDDDDDDDD:::::::::|
|:::::::::::WWWWWWWWWWWW::::WWWWWWWWWWW::DDDDDDDDDDD:::DDDDDDDDDDDDD::::::::::|
|:::::::::::WWWWWWWWWWW:::::WWWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDDD::::::::::::|
|:::::::::::WWWWWWWWWW::::::WWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDD::::::::::::::|
|:::::::::::WWWWWWWWW:::::::WWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDD::::::::::::::::|
|:::::::::::WWWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDD:::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
|:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|
b=============================================================================de[40m e[37m
Hit any key to stop autoboot: 1 0
USB: OTG-Controller ID(0x4F54) Version(0x290A)
In case of a normal boot (with only one disk attached) it looks like this:
[ 4.380061] procd: - early -
[ 4.383014] procd: - watchdog -
[ 4.921027] procd: - watchdog -
[ 4.924369] procd: - ubus -
[ 4.934441] random: ubusd: uninitialized urandom read (4 bytes read)
[ 4.978109] random: ubusd: uninitialized urandom read (4 bytes read)
[ 4.984740] random: ubusd: uninitialized urandom read (4 bytes read)
[ 4.991693] procd: - init -
Please press Enter to activate this console.
[ 5.115854] kmodloader: loading kernel modules from /etc/modules.d/*
[ 5.142509] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.159699] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.171212] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 5.205766] xt_time: kernel timezone is -0000
[ 5.215911] PPP generic driver version 2.4.2
[ 5.221750] NET: Registered protocol family 24
[ 5.228436] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 6.432255] urandom_read: 5 callbacks suppressed
[ 6.432262] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.272376] eth0: link is up, 1000 FDX, pause enabled
[ 8.277533] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.283384] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready