[SOLVED] Turning a Xdsl lede router functionally into a bridged vdsl-modem

A simple bridge should working.


config dsl 'dsl'
	option annex 'A' 
	option xfer_mode 'ptm'

config device 'ptm_dev'
	option ifname 'ptm0'
	option mtu '1508'
	option mac 'XX'

config interface 'modem'
	option type 'bridge'
	option ifname 'ethX.X ptm0'
	option mtu '1508'


config zone
	option name 'modem'
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'ACCEPT'
	option network 'modem

or disable firewall

And setup config switch & config switch_vlan
i dont know the switch config for this device but default is allways eth0.1 or eth1.1 for lan.

EDIT MTU 1508 for mini jumbo frame if you provider support it.

1 Like