I have two questions:
My first question:
Can tell me someone (maybe a tutorial) how I can go back to stock firmware
with linux OS not windows ?
My second question: Can i switch from openwrt to dd-wrt direct ? And dd-wrt to openwrt ?
Will be easier.
Thanks together
micky1067
The information in https://openwrt.org/toh/netgear/r7800 is pretty much OS agnostic.
Set static IP
Send image over TFTP using TFTP client
1 Like
hello...
can i use every tftp client in linux ?
I see can only in this way. Not direct flashing.
thanks for your fast answer.
hnyman
4
Pretty much. (Just set it to the binary mode and send the firmware)
Read advice from wiki (like frollic posted) or from
1 Like
thanks...
hope I don't brick my router.
I like to test different firmware. Right now is openwrt kong.
hnyman
6
Well, I have flashed my R7800 a bit over 900 times and used the TFTP recovery 15-20 times during the last 4 years.
1 Like
Wow...
But you use windows as OS. I use linux .. I must look how I can change to binary mode.
There is no gui.
hnyman
8
TFTP might be nowadays by default in binary mode, or you can just issue the "binary" command on tftp console, or as command-line parameter
Man page: https://linux.die.net/man/1/tftp
1 Like
You run the same commands (with diff switches perhaps), there's no difference between Win and Linux here.
2 Likes
Thanks to all...
It runs.. I am back to stock firmware.
tmomas
11
If your problem is solved, please consider marking this topic as [Solved]. See How to mark a topic as [Solved] for a short how-to.