hi,i'm new user for openwrt. i'm not setup too many. just finish PPPOE, 6in4 setup work fine. but i found my phone can't visit windows share folder
i use x-plore\solid explore both can't visit my pc share folder. i use stock\ddwrt it's work fine.
so, who can help me what can i do ?
do i need install about samba\cifs software for openwrt? but i just want phone visit pc folder
who can hlep ? sorryl my pool english
If the windows pc and the phone are connected to the same interface, lan by default, then there is no block of connections from one host to the other.
Just in case, use ssh to connect to the device and run the following commands: uci export network; uci export firewall
Use the "Preformatted text </>" button and paste here the output.
Remember to remove any sensitive data, like username, password, mac address.
1 Like
thank u for relay! here is:
package network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdxxxxxxxxxx48'
config interface 'lan'
option type 'bridge'
option ifname 'eth1.1'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option ifname 'eth0.2'
option proto 'pppoe'
option password '8xxxxx'
option ipv6 'auto'
option username '0xxxxxxxxxx'
option peerdns '0'
list dns '1.2.4.8'
list dns '119.29.29.29'
list dns '8.8.4.4'
config interface 'wan6'
option ifname 'eth0.2'
option proto '6in4'
option username 'mxxxxxxxxxxxxxxxxo'
option peeraddr '66.2xxxxxxxxxx'
option ip6addr '200xxxxxxxxxxxx'
option tunnelid '5xxxxxxxxxx'
option mtu '1480'
option password 'xxxxxxxxxxxxxdpK'
list ip6prefix '200xxxxxxxxxxxx'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '1 2 3 4 6t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '5 0t'
root@R7800:~# uci export firewall
package firewall
config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'REJECT'
config zone
option name 'lan'
list network 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
config zone
option name 'wan'
list network 'wan'
list network 'wan6'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'
config forwarding
option src 'lan'
option dest 'wan'
config rule
option name 'Allow-DHCP-Renew'
option src 'wan'
option proto 'udp'
option dest_port '68'
option target 'ACCEPT'
option family 'ipv4'
config rule
option name 'Allow-Ping'
option src 'wan'
option proto 'icmp'
option icmp_type 'echo-request'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-IGMP'
option src 'wan'
option proto 'igmp'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-DHCPv6'
option src 'wan'
option proto 'udp'
option src_ip 'fc00::/6'
option dest_ip 'fc00::/6'
option dest_port '546'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-MLD'
option src 'wan'
option proto 'icmp'
option src_ip 'fe80::/10'
list icmp_type '130/0'
list icmp_type '131/0'
list icmp_type '132/0'
list icmp_type '143/0'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Input'
option src 'wan'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
list icmp_type 'router-solicitation'
list icmp_type 'neighbour-solicitation'
list icmp_type 'router-advertisement'
list icmp_type 'neighbour-advertisement'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Forward'
option src 'wan'
option dest '*'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-IPSec-ESP'
option src 'wan'
option dest 'lan'
option proto 'esp'
option target 'ACCEPT'
config rule
option name 'Allow-ISAKMP'
option src 'wan'
option dest 'lan'
option dest_port '500'
option proto 'udp'
option target 'ACCEPT'
config include
option path '/etc/firewall.user'
config include 'miniupnpd'
option type 'script'
option path '/usr/share/miniupnpd/firewall.include'
option family 'any'
option reload '1'
There is nothing blocking intra lan traffic.
The only thing I can think of is that you are using some name to access the shares and it is not resolved internally properly. Try to use IP instead of a name to verify that.
thank you very much
now i'm reset openwrt. just only setup pppoe and wifi 6in4. but still can't phone visit windows smb
last, i tune off windows firewall control,problem is done 
but ddwrt work fine for windowfirewall
anyway ,thank you!
If your problem is solved, please consider marking this topic as [Solved]. See How to mark a topic as [Solved] for a short how-to.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.