[Solved]Looking original firmware for Yuncore XD6800

Dear all

I have bought a yuncore ap model XD6800
After try to flash some firmware that download on forum but it not have openwrt web access.
Unfortunately, I'm mistake backup original firmware of XD6800.
I need to flash original firmware but I can not find a firmware on openwrt download page.
Please share with me.

Did you purchase this item off alibaba?
If so, I've found it beneficial to contact the reseller of devices within the documents provided by reseller.
Ask them for link to devices firmware and instructions (In language of choice) on how to flash.

Hi Biil,
I don' purchase device in market, just receive it from my friend.
It's old and no know the source.
So, I decided find our openWrt forums.

That's about as much help I can offer. I see your problem.

To make the issue clear for others, can you add any more information?

We see you don't have LuCi, but can you use SSH, terminal into the router to gain access to command line. From there we can gain more details to assist.

cat /etc/openwrt_release

Yes. Currently, I'm using openwrt-19.07.2 with firmware version "openwrt-19.07.2-ipq40xx-generic-yuncore_xd6800-squashfs-sysupgrade.bin"
Could you guide me how to install or enable LuCI?
SSH it's ok.

Run command I previously posted into the preformatted text.

Example mine:

/$ cat /etc/openwrt_release
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='19.07.10'
DISTRIB_REVISION='r11427-9ce6aa9d8d'
DISTRIB_TARGET='ar71xx/mikrotik'
DISTRIB_ARCH='mips_24kc'
DISTRIB_DESCRIPTION='OpenWrt 19.07.10 r11427-9ce6aa9d8d'
DISTRIB_TAINTS=''

[quote="Bill, post:4, topic:129050"]
cat /etc/openwrt_release
[/quote]

Hi Bin,
I would like to show you the result after I run command 
cat /etc/openwrt_release
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='19.07.2'
DISTRIB_REVISION='r10947-65030d81f3'
DISTRIB_TARGET='ipq40xx/generic'
DISTRIB_ARCH='arm_cortex-a7_neon-vfpv4'
DISTRIB_DESCRIPTION='OpenWrt 19.07.2 r10947-65030d81f3'
DISTRIB_TAINTS='no-all'

Please help me to show web interface of AP!

type or paste code here

If you have ssh access, see this wiki article - https://openwrt.org/docs/guide-user/luci/luci.essentials#luci_essentials

Thank all. I installed successfull LuCI and set up Network interface for AP.

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.