[Dynalink DL-WRX36 Front] [Dynalink DL-WRX36 Back] OpenWRT entry for the Dynalink dl-wrx36 https://openwrt.org/toh/dynalink/dl-wrx36 Link to the Backup Configuration File That has SSH enabled as per the guide. If you are going to use the pre-configured router config file that enables SSH (r…

Read and understand what it's telling you. There's also a link to the very detailed how to forum post, on the wiki page. [image] Dynalink DL-WRX36 Install Installing and Using OpenWrt Dynalink dl-wrx36 Detailed Install Guide (Using SSH 'option A') Adapted fro…

I am stuck at this part of the guide. 8b. I am installing the latest snapshot due to the device still kinda being under development, according to the guide on it's OpenWRT device page I provided in the previous post. Change the boot command so it loads the initramfs image on next boot (fallback t…

[image] Oliumen: Could use some clarification and help to move forward. What is the full name of the file you put on the USB? How is the USB formatted and what size is it?

Part 0 - Prerequisites Before beginning, make sure to get a USB flash drive that you can format (you will lose all data on the flash drive). It will only need ~12MB of total space, so any flash drive should do. [USB Flash Drive] [PINK Has Files and Is Fat32] Plug the USB flash drive into y…

My recent previous post has all that information for you to look over and get your bearings as to where I am at. Thank you for posting and trying to help. It is appreciated. I await your reply. Thank you!

[screen grab 5] This is the message I get when attempting to SSH back in on 192.168.1.1 on the router.

Is this why we are scp'ing files? But doesn't that mean I need to have them on the host machine I am using with the router to copy them over shh? Does me copying over these files to the router provide a proper key which then allows me to ssh in again? Sorry just trying to understand what it is I am …

The key will change again, since you'll be booting a new image, and each image generate a new set of keys. The warning will be pop up when an old (already cached) IP receives a new key. This isn't really Openwrt related though, but ssh 101.

[image] frollic: There's also a link to the very detailed how to forum post, on the wiki page. Ah there it is. Thank you. I hate that the required information isn't on a single page and is instead spread across several different posts and pages and places, etc. Very disorganized in my opinion…

[SOLVED] Installing OpenWRT on the Dynalink DL-WRX36

Installing and Using OpenWrt

frollic October 17, 2024, 10:07pm 7

Read and understand what it's telling you.

There's also a link to the very detailed how to forum post, on the wiki page.

1 Like