[SOLVED] Firmware i915 error on OpenWrt boot

[JustAnotherEndUser]

@roddel007

I have same error on x86 build. If you say its internal gpu problem which is useless anyway then good.

Unless you are running on a laptop with built in display. The downside is with power managment disabled the screen stays on all the time. To workaround I use setterm in the startup on each boot with a screen blank timeout.

More details here:

Run Setterm --blank force on boot

I tried something on a hunch and was able to figure out a solution for this. You have to > redirect the command to /dev/tty0 ( console ) example: setting to blank screen after 1 minute of inactivity /usr/bin/setterm --blank 1 > /dev/tty0 I tested adding this to startup to blank the screen on an x86_64 device after 1 minute of inactivity. It works. [image] FYI @ OP Asgard11926