Pilot6
July 25, 2018, 7:41pm
1
I built a DIR-825b1 image with default .config.
The router boots, but there is no forwarding from lan to wan. I can get into router from lan and can access wan from the router.
Something is broken in the firewall, but I could not find what exactly.
When you access the router, is there a forwarding rule from LAN to WAN? in the General Firewall section?
Pilot6
July 25, 2018, 8:07pm
3
Yes, the forwarding rule is there. And all firewall config looks as usual. I am not that dumb.
But I don't see something that blocks it. Maybe some package in .config is missing.
craz
July 25, 2018, 8:18pm
4
Same problem with avm 4040, 18.06 snapshot compiled today.
Pilot6
July 25, 2018, 8:34pm
5
What was the last snap that worked? Maybe we can find the wrong commit.
craz
July 26, 2018, 5:07am
6
Before updating I used OpenWrt 18.06-SNAPSHOT r7116 without problems.
Pilot6
July 26, 2018, 1:55pm
9
Now that is fixed but dhcpv6 server is broken.
craz
July 26, 2018, 2:46pm
10
It was probably solved with this
But @jow has not entered it yet in the 18.06 branch.
Pilot6
July 26, 2018, 2:57pm
11
No, it wasn't. I tested it.
jow
July 26, 2018, 3:07pm
12
I tested before the change and did get no IPv6, then I retested after the change and got IPv6. You might encounter yet another issue @Pilot6
Pilot6
July 26, 2018, 4:36pm
13
I confirm. It works on trunk.
I was doing too many things at a time.
1 Like