Hello,
I am just trying to make use of my old router as a repeater but it has a custom firmware which doesn't let me configure they way i want it to. thought to leverage Openwrt for this project. PS: I do have root access to it
Would you be guys kind enough in helping me with the appropriate firmware i can use it with, that would be very helpful.
Router Details > https://www.telenetsystems.com/wifi/wifi-outdoor-cpe.htm
Router Hardware :------------------------------------------------------------------------------------------
system type : Atheros AR9330 (Hornet)
processor : 0
cpu model : MIPS 24Kc V7.4
BogoMIPS : 266.24
wait instruction : yes
microsecond timers : yes
tlb_entries : 16
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ffb]
ASEs implemented : mips16
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available
Kernel Info :-------------------------------------------------------------------------------------------------
free_area_init_node: node 0, pgdat 80215b30, node_mem_map 81000000
Normal zone: 64 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 8128 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:128k(u-boot),64k(u-boot-env),2944k(rootfs),896k(uImage),64k(NVRAM),64k(config),2944k(brootfs),896k(buImage),64k(chksm),64k(bchk
sm),64k(ART) mem=32M
PID hash table entries: 128 (order: 7, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 30156k/32768k available (1701k kernel code, 2612k reserved, 432k data, 112k init, 0k highmem)
NR_IRQS:128
plat_time_init: plat time init done
Calibrating delay loop... 266.24 BogoMIPS (lpj=532480)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
===== ar7240_platform_init: 0
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
AR7240 GPIOC major 0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 58
io scheduler noop registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
ttyS0: detected caps 00000000 should be 00000100
serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
console [ttyS0] enabled
brd: module loaded
11 cmdlinepart partitions found on MTD device ar7240-nor0
Creating 11 MTD partitions on "ar7240-nor0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000030000 : "u-boot-env"
0x000000030000-0x000000310000 : "rootfs"
0x000000310000-0x0000003f0000 : "uImage"
0x0000003f0000-0x000000400000 : "NVRAM"
0x000000400000-0x000000410000 : "config"
0x000000410000-0x0000006f0000 : "brootfs"
0x0000006f0000-0x0000007d0000 : "buImage"
0x0000007d0000-0x0000007e0000 : "chksm"
0x0000007e0000-0x0000007f0000 : "bchksm"
0x0000007f0000-0x000000800000 : "ART"
usbmon: debugfs is not available
nf_conntrack version 0.5.0 (512 buckets, 2048 max)
TCP cubic registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com
All bugs added by David S. Miller davem@redhat.com
arch/mips/ar7240/gpio.c (ar7240_simple_config_init) AP_RESET_GPIO: 12
arch/mips/ar7240/gpio.c (ar7240_simple_config_init) JUMPSTART_GPIO: 11
ar7240wdt_init: Registering WDT success
TELENET-1:calling prepare_namespace saved_root_name=31:02
TELENET-1:calling name_to_dev_t=31:02
TELENET-1:calling mount_root=31:02
TELENET-2:calling mount_block_root=root
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 112k freed
ATHR_GMAC: Length per segment 1536
ATHR_GMAC: fifo cfg 3 01f00140
ATHR_GMAC: Mac address for unit 0:bf3f0000
ATHR_GMAC: fa:f3:00:21:43:4f
ATHR_GMAC: Max segments per packet : 1
ATHR_GMAC: Max tx descriptor count : 40
ATHR_GMAC: Max rx descriptor count : 252
ATHR_GMAC: Mac capability flags : 4403
ATHR_GMAC: Mac address for unit 1:bf3f0006
ATHR_GMAC: 4e:46:49:47:5f:56
ATHR_GMAC: Max segments per packet : 1
ATHR_GMAC: Max tx descriptor count : 40
ATHR_GMAC: Max rx descriptor count : 96
ATHR_GMAC: Mac capability flags : 4D83
athr_gmac_ring_alloc Allocated 640 at 0x81cbf800
athr_gmac_ring_alloc Allocated 1536 at 0x81c52000
Setting Drop CRC Errors, Pause Frames and Length Error frames
ATHRS26: resetting s26
ATHRS26: s26 reset done
ATHRS26: Telenet : in kernel or fs Read s26---------------------------------- Telenet
ATHRS26: ADDR Telenet :108
ATHRS26: DATA_B Telenet :3e0001
ATHRS26: ADDR Telenet :208
ATHRS26: DATA_B Telenet :3d0001
ATHRS26: ADDR Telenet :308
ATHRS26: DATA_B Telenet :3b0001
ATHRS26: ADDR Telenet :408
ATHRS26: DATA_B Telenet :370001
ATHRS26: ADDR Telenet :508
ATHRS26: DATA_B Telenet :2f0001
ATHRS26: ADDR Telenet :608
ATHRS26: DATA_B Telenet :1f0001
ATHRS26Port 1: DATA_A Telenet :210001
ATHRS26Port 2: DATA_A Telenet :210001
ATHRS26Port 3: DATA_A Telenet :210001
ATHRS26Port 4: DATA_A Telenet :210001
Setting PHY...
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 0 :1000
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 1 :1000
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 2 :1000
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 3 :1000
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 4 :3100
ATHR_GMAC: Enet Unit:1 PHY:3 is UP GMii 100Mbps full duplex
ATHR_GMAC: done cfg2 0x7215 ifctl 0x0 miictrl
Setting Drop CRC Errors, Pause Frames and Length Error frames
athr_gmac_ring_alloc Allocated 640 at 0x81d20c00
athr_gmac_ring_alloc Allocated 4032 at 0x81d22000
Setting Drop CRC Errors, Pause Frames and Length Error frames
Setting PHY...
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 0 :1000
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 1 :1000
ATHRS26 **athrs26_phy_setup ATHR_PHY_CONTROL 2 :1000
ATHRS26 athrs26_phy_setup ATHR_PHY_CONTROL 3 :1000
ATHRS26 athrs26_phy_setup ATHR_PHY_CONTROL 4 :1000
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 2(eth1) entering forwarding state
**** drop_caches_sysctl_handler: all done timer added ...
ATHR_GMAC:unit 1: phy 3 not up carrier 1
br0: port 2(eth1) entering disabled state
ATHR_GMAC: Enet Unit:1 PHY:3 is UP GMii 100Mbps full duplex
ATHR_GMAC: done cfg2 0x7215 ifctl 0x0 miictrl
Setting Drop CRC Errors, Pause Frames and Length Error frames
br0: port 2(eth1) entering forwarding state
asf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
ath_hal: 0.9.17.1 (AR9380, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_ahb: 9.2.0_U10.1020 (Atheros/multi-bss)
__ath_attach: Set global_scn[0]
ACBKMinfree = 48
ACBEMinfree = 32
ACVIMinfree = 16
ACVOMinfree = 0
CABMinfree = 48
UAPSDMinfree = 0
Bootstrap clock 25MHz
ar9300RadioAttach: Need analog access recipe!!
Restoring Cal data from Flash
ath_get_caps[5199] rx chainmask mismatch actual 1 sc_chainmak 0
ath_get_caps[5174] tx chainmask mismatch actual 1 sc_chainmak 0
SC Callback Registration for wifi0
wifi0: Atheros 9380: mem=0xb8100000, irq=2
wlan_vap_create : enter. devhandle=0x81e7c2c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x81e7c2c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
VAP device ath0 created
br0: port 2(eth1) entering disabled state
br0: port 2(eth1) entering forwarding state
DES SSID SET=An0kit-ss3ccA-Eth3r_CP3
ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
VAP device ath1 created
br0: port 2(eth1) entering disabled state
br0: port 2(eth1) entering forwarding state
DES SSID SET=Atheros_XSpan_2G_AP2
ieee80211_ioctl_siwmode: imr.ifm_active=131200, new mode=2, valid=1
device ath0 entered promiscuous mode
br0: port 3(ath0) entering forwarding state
device ath1 entered promiscuous mode
br0: port 4(ath1) entering forwarding state
/ #