donh
July 21, 2023, 9:30pm
1
I have wrt1900acs acting as an access point. On the wired side it gets good speed. Well as good as the connection is rated by the isp.
Hostname
OpenWrt
Model
Linksys WRT1900ACS
Architecture
ARMv7 Processor rev 1 (v7l)
Target Platform
mvebu/cortexa9
Firmware Version
OpenWrt 23.05.0-rc2 r23228-cd17d8df2a
It is probably a setting I am missing somewhere. What files should I post to help?
Thanks
I uploaded a couple of screenshots but I don't see them. Basically wired is 60 x5 and wireless is 15 x 3.
The speed of wifi connections depends on various factors
What wifi speed are you currently getting?
Wi-Fi (/ˈwaɪfaɪ/)[a] is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. These are the most widely used computer networks in the world, used globally in home and small office networks to link devices together and to a wireless router to connect them to the Internet, and in wireless access points in public places ...
donh
July 21, 2023, 10:41pm
3
Thanks for the reply.https://www.waveform.com/tools/bufferbloat?test-id=6aae9927-65d6-4fda-9c8c-62981cf393ae
Wifi speedhttps://www.waveform.com/tools/bufferbloat?test-id=289add32-adb2-4cb2-8292-06b54d9be2c6
All the stuff listed in the other link is good. I have seen screen shots of the same hardware with 300+ scores so I think it must be a setting. I have reset with no improvement so I think it is something I am missing.
donh
July 21, 2023, 10:56pm
4
does it occur only on 2.4GHz or also on 5GHz?
donh
July 22, 2023, 1:33pm
6
My laptop is only 2.4. I will test with phone later.
Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
Phone looks good so seems only 2.4.
donh
July 25, 2023, 8:57pm
7
Tried snapshot this morning. No change. Any config I should upload?