Hi,
I have 1000/50Mbps FTTH and I'm able to reach 950+ Mbps with my RT-AX82U.
Just for creating a guide for my readers, I bought RT-AX1800U and flashed OpenWrt 23.05.5 on it.
Tested the speeds and both on LAN and Wi-Fi, I'm unable to get past 300 Mbps.
Any advice or is this the limit of this device?
Haven't tried with stock FW.
Regards
brada4
October 28, 2024, 8:36pm
2
Enable soft offload, if you need roaming between 2 radios check here:
You should be able to get 500-600Mbps without offloads with firewall4 head.
Either try (rebuilding firewall4 package from) SNAPSHOT or download files as follows:
My result RT-AX54 (same baseboard, just one more LAN port) against 1000/500 FTTH without offload with all 5 mods:
https://www.waveform.com/tools/bufferbloat?test-id=6d1dfbe0-c7af-4954-bed6-eabf24050c44
1 Like
Thank you for the heads up. Enabling Software flow offloading
gave me 700 Mbps speeds. Enabling Hardware flow offloading
afterwards allowed me to reach 930 Mbps whick is OK. Thank you.
1 Like
brada4
October 29, 2024, 12:14pm
4
Future version will saturate gigabit cable with soft offload (gigabit up/gigabit down)
1 Like
system
Closed
November 8, 2024, 12:14pm
5
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.