Setup guest lan or vlan to add restricted wifi

Installing and Using OpenWrt
1

i found a couple guides on the wiki but they are in script form and im not really sure on that yet, i am comfortable ssh editing the files manually, but im not sure what it would look like.

i have a primary lan and wifi setup already on 10.x.x.1 with wifi 6 2.4 and 5ghz share name and password.

i would like to setup a guest network that will allow internet and the individual devices attached to that network to speak to eachother (no isolation) but not allow it to get back to the firewall and lan,

if i use the scripting do i enter it line by line or in a block?
what tweaks in extras would you setup on a guest network (we dont have many guests ever i just want it for family if they visit and or testing a new device before allowing on main lan

https://openwrt.org/docs/guide-user/network/wifi/guestwifi/guest-wlan
https://openwrt.org/docs/guide-user/network/wifi/guestwifi/extras

2

The first link you shared should be all you need. Did you try it? Did you run into any issues or have any questions about the process?

3

mostly curious if i just do the lines one by one or copy as a block and hit enter?

4

well i just dug a little bit, i think the direction i would rather go is to setup my 2.4 and 5ghz networks as the same name and then setup passkey vlans instead,

that way i can give the guests their own password and not polute the wifi air,
i have to dig into it a bit more now, but where could i look to determine if the gl-mt6000 supports this ability,

5

closing and moving conversation to existing thread on topic

6

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.