for 19.07 you need to delete the text in the patch file (it is a text file) openwrt/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch and replace with this
kirkwood: add nsa310b dtb, a zyxel nsa310 variant
add support to a nsa310 variant with red/green usb led
and lm85 temp/fan controller
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
NOTE: this patch can be upstreamed as-is, LEDE-specific
nand partitions are set in another patch
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -268,6 +268,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
kirkwood-nsa310a.dtb \
+ kirkwood-nsa310b.dtb \
kirkwood-nsa320.dtb \
kirkwood-nsa325.dtb \
kirkwood-openblocks_a6.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
@@ -0,0 +1,303 @@
+/*
+ * Device tree file for the Zyxel NSA 310S NAS box, hacked to disguise itself as a NSA 310b for OpenWrt
+ *
+ * Copyright (c) 2015-2016, bodhi <mibodhi@gmail.com>
+ *
+ * Based on
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "ZyXEL NSA310b";
+ compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins ; /* NA */
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins ; /* NA */
+ marvell,function = "sata1";
+ };
+
+ pmx_usb_power: pmx-usb-power {
+ marvell,pins = "mpp21"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_off: pmx-pwr-off {
+ marvell,pins = "mpp27"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp24"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_copy: pmx-btn-copy {
+ marvell,pins = "mpp25"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_power: pmx-btn-power {
+ marvell,pins = "mpp26"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_green: pmx-led-hdd2-green {
+ marvell,pins = "mpp34"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_red: pmx-led-hdd2-red {
+ marvell,pins = "mpp12"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_green: pmx-led-copy-green {
+ marvell,pins = "mpp22"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_red: pmx-led-copy-red {
+ marvell,pins = "mpp23"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_orange: pmx-led-sys-orange {
+ marvell,pins = "mpp29"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
+ marvell,pins = "mpp16"; /* OK */
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
+ marvell,pins = "mpp13"; /* OK */
+ marvell,function = "gpio";
+ };
+
+/*
+ pmx_buzzer: pmx-buzzer {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+*/
+
+ pmx_pwr_sata1: pmx-pwr-sata1 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "ok";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ status = "okay";
+ ht1382: rtc@68 {
+ compatible = "htk,ht1382";
+ reg = <0x68>;
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
+
+ usb0_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
+ button@2 {
+ label = "Copy Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+ button@3 {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+ &pmx_led_usb_green
+ &pmx_led_sys_green &pmx_led_sys_orange
+ &pmx_led_copy_green &pmx_led_copy_red
+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ pinctrl-names = "default";
+
+ green-sys {
+ label = "nsa310s:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ orange-sys {
+ label = "nsa310s:orange:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd1 {
+ label = "nsa310s:green:hdd1";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd1 {
+ label = "nsa310s:red:hdd1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd2 {
+ label = "nsa310s:green:hdd2";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd2 {
+ label = "nsa310s:red:hdd2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ green-usb {
+ label = "nsa310s:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ green-copy {
+ label = "nsa310s:green:copy";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ide-disk";
+ };
+ red-copy {
+ label = "nsa310s:red:copy";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+ chip-delay = <35>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00c0000 0x0080000>;
+ };
+ partition@140000 {
+ label = "ubi";
+ reg = <0x0140000 0x7ec0000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@1 {
+ compatible = "marvell,88e1510";
+ reg = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
when I try use is command, I have "?" - disk isnt recognized correct:
