Seeking Guidance on Porting Spectrum SBE1V1K Router to OpenWrt

Hardware Questions and Recommendations
1

I'd like to begin working on porting the Spectrum SBE1V1K router to OpenWrt. I'm new to device porting, so I don't yet know the full process, but I'm eager to learn and put in the time to understand the required steps.

Before I start from scratch, I wanted to ask if there's any existing work, documentation, or partial support already available for this device. If not, I'd appreciate any guidance on how to get started - such as identifying the SoC, extracting firmware, or setting up a build environment.

My goal is to both get this device supported and also learn the OpenWrt porting process along the way. If anyone has experience with this hardware or can point me toward useful resources, I'd be very grateful.

Thank you!

2

There is no support. What fcc id is on the case?

3

This is the FCCID: H8NSBE1V1K

4

https://apps.fcc.gov/eas/GetApplicationAttachment.html?id=7209746

Going off the internal photos:

  • SoC: IPQ9570
  • RAM: 2GB DDR4 3200
  • Flash: 8GB eMMC
  • WLAN: QCN6214 + QCN6274 + QCN6274
  • Switch: QCA8075
  • 2.5GbE: QCA8081
  • 10GbE: RTL8261BE
6
7

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.