Sangoma PBXact UC 40 hardware discovery

I recently bought a used Sangoma box on ebay UK. The device has a Celeron J1900 processor, 2GB of DDR3L ram, 4 x GB ethernet ports, a console port, a VGA port, 3 USB ports and 2 mini pci-e slots. The motherboard contains a SIM card slot so one of the mini pci-e slots could possibly be used for a 4G / LTE connection.

Writing the x64 efi openwrt image to a sata ssd makes it boot into OpenWrt without any issues. The bootlog and some images are included below. The device is fanless and uses the aluminium housing to dissipate the heat so it is completely silent.

Koen



1 Like
root@OpenWrt:~# dmesg
[    0.000000] Linux version 5.10.146 (builder@buildhost) (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19803-9a599fee93) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Fri Oct 14 22:44:41 2022
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=c120d9f5-d6f9-d15b-05a7-0d348f8a4b02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000793e6fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000793e7000-0x0000000079416fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079417000-0x0000000079426fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000079427000-0x0000000079929fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007992a000-0x0000000079baefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079baf000-0x0000000079c04fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000079c05000-0x0000000079c05fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079c06000-0x0000000079c47fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079c48000-0x0000000079dbcfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079dbd000-0x0000000079ff9fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi: ESRT=0x79bab298 ACPI=0x7941a000 ACPI 2.0=0x7941a000 SMBIOS=0xf05b0 SMBIOS 3.0=0x79ad2000
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: baytrail baytrail/STX-R19F VER:1.1, BIOS 5.6.5 11/01/2016
[    0.000000] tsc: Detected 2000.000 MHz processor
[    0.001742] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001750] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001768] last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.001774] MTRR default type: uncachable
[    0.001776] MTRR fixed ranges enabled:
[    0.001779]   00000-9FFFF write-back
[    0.001781]   A0000-BFFFF uncachable
[    0.001784]   C0000-FFFFF write-protect
[    0.001786] MTRR variable ranges enabled:
[    0.001789]   0 base 000000000 mask F80000000 write-back
[    0.001792]   1 base 07A000000 mask FFE000000 uncachable
[    0.001794]   2 base 07C000000 mask FFC000000 uncachable
[    0.001796]   3 disabled
[    0.001798]   4 disabled
[    0.001799]   5 disabled
[    0.001801]   6 disabled
[    0.001802]   7 disabled
[    0.001977] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.008038] found SMP MP-table at [mem 0x000fd930-0x000fd93f]
[    0.008059] esrt: Reserving ESRT space from 0x0000000079bab298 to 0x0000000079bab2d0.
[    0.010415] Secure boot disabled
[    0.010422] ACPI: Early table checksum verification disabled
[    0.010430] ACPI: RSDP 0x000000007941A000 000024 (v02 ALASKA)
[    0.010441] ACPI: XSDT 0x000000007941A080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010455] ACPI: FACP 0x0000000079425E78 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.010467] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20200925/tbfadt-564)
[    0.010478] ACPI: DSDT 0x000000007941A188 00BCE9 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.010489] ACPI: FACS 0x0000000079929F80 000040
[    0.010498] ACPI: APIC 0x0000000079425F88 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.010508] ACPI: FPDT 0x0000000079426010 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010519] ACPI: FIDT 0x0000000079426058 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.010529] ACPI: MCFG 0x00000000794260F8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.010539] ACPI: LPIT 0x0000000079426138 000104 (v01 ALASKA A M I    00000003 VLV2 0100000D)
[    0.010550] ACPI: HPET 0x0000000079426240 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.010560] ACPI: SSDT 0x0000000079426278 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.010571] ACPI: SSDT 0x00000000794269E0 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.010581] ACPI: SSDT 0x0000000079426C70 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.010591] ACPI: UEFI 0x0000000079426DF0 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.010602] ACPI: Reserving FACP table memory at [mem 0x79425e78-0x79425f83]
[    0.010606] ACPI: Reserving DSDT table memory at [mem 0x7941a188-0x79425e70]
[    0.010610] ACPI: Reserving FACS table memory at [mem 0x79929f80-0x79929fbf]
[    0.010614] ACPI: Reserving APIC table memory at [mem 0x79425f88-0x7942600b]
[    0.010617] ACPI: Reserving FPDT table memory at [mem 0x79426010-0x79426053]
[    0.010621] ACPI: Reserving FIDT table memory at [mem 0x79426058-0x794260f3]
[    0.010625] ACPI: Reserving MCFG table memory at [mem 0x794260f8-0x79426133]
[    0.010629] ACPI: Reserving LPIT table memory at [mem 0x79426138-0x7942623b]
[    0.010633] ACPI: Reserving HPET table memory at [mem 0x79426240-0x79426277]
[    0.010636] ACPI: Reserving SSDT table memory at [mem 0x79426278-0x794269da]
[    0.010640] ACPI: Reserving SSDT table memory at [mem 0x794269e0-0x79426c6f]
[    0.010644] ACPI: Reserving SSDT table memory at [mem 0x79426c70-0x79426de9]
[    0.010648] ACPI: Reserving UEFI table memory at [mem 0x79426df0-0x79426e31]
[    0.010664] ACPI: Local APIC address 0xfee00000
[    0.010695] Zone ranges:
[    0.010699]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010704]   DMA32    [mem 0x0000000001000000-0x0000000079ffffff]
[    0.010709]   Normal   empty
[    0.010713] Movable zone start for each node
[    0.010716] Early memory node ranges
[    0.010719]   node   0: [mem 0x0000000000001000-0x000000000003efff]
[    0.010723]   node   0: [mem 0x0000000000040000-0x000000000009ffff]
[    0.010726]   node   0: [mem 0x0000000000100000-0x000000001effffff]
[    0.010729]   node   0: [mem 0x000000001f100000-0x000000001fffffff]
[    0.010733]   node   0: [mem 0x0000000020100000-0x00000000793e6fff]
[    0.010736]   node   0: [mem 0x0000000079c05000-0x0000000079c05fff]
[    0.010739]   node   0: [mem 0x0000000079c48000-0x0000000079dbcfff]
[    0.010742]   node   0: [mem 0x0000000079ffa000-0x0000000079ffffff]
[    0.010747] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
[    0.010752] On node 0 totalpages: 496385
[    0.010754]   DMA zone: 64 pages used for memmap
[    0.010756]   DMA zone: 30 pages reserved
[    0.010759]   DMA zone: 3998 pages, LIFO batch:0
[    0.010761]   DMA32 zone: 7744 pages used for memmap
[    0.010764]   DMA32 zone: 492387 pages, LIFO batch:63
[    0.010769] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010774] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010853] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.013587] On node 0, zone DMA32: 256 pages in unavailable ranges
[    0.021669] On node 0, zone DMA32: 256 pages in unavailable ranges
[    0.021740] On node 0, zone DMA32: 2078 pages in unavailable ranges
[    0.021755] On node 0, zone DMA32: 66 pages in unavailable ranges
[    0.021776] On node 0, zone DMA32: 573 pages in unavailable ranges
[    0.022542] On node 0, zone DMA32: 24576 pages in unavailable ranges
[    0.022550] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.022561] Reserving Intel graphics memory at [mem 0x7b000000-0x7effffff]
[    0.022736] ACPI: PM-Timer IO Port: 0x408
[    0.022743] ACPI: Local APIC address 0xfee00000
[    0.022757] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.022761] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.022765] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.022768] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.022784] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[    0.022790] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.022796] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.022800] ACPI: IRQ0 used by override.
[    0.022803] ACPI: IRQ9 used by override.
[    0.022807] Using ACPI (MADT) for SMP configuration information
[    0.022812] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.022822] TSC deadline timer available
[    0.022826] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.022879] [mem 0x7f000000-0xe00f7fff] available for PCI devices
[    0.022884] Booting paravirtualized kernel on bare hardware
[    0.022892] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.022905] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.023804] percpu: Embedded 48 pages/cpu s156696 r8192 d31720 u524288
[    0.023824] pcpu-alloc: s156696 r8192 d31720 u524288 alloc=1*2097152
[    0.023828] pcpu-alloc: [0] 0 1 2 3
[    0.023881] Built 1 zonelists, mobility grouping on.  Total pages: 488547
[    0.023888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=c120d9f5-d6f9-d15b-05a7-0d348f8a4b02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[    0.024630] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.024983] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.025054] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.039779] Memory: 1879072K/1985540K available (14338K kernel code, 1123K rwdata, 2076K rodata, 1464K init, 1396K bss, 106212K reserved, 0K cma-reserved)
[    0.039886] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.039900] Kernel/User page tables isolation: enabled
[    0.040028] rcu: Hierarchical RCU implementation.
[    0.040034] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.040038]  Tracing variant of Tasks RCU enabled.
[    0.040041] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.040045] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.040064] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[    0.040503] Console: colour dummy device 80x25
[    0.040983] printk: console [tty0] enabled
[    0.893120] printk: console [ttyS0] enabled
[    0.897317] ACPI: Core revision 20200925
[    0.901406] APIC: Switch to symmetric I/O mode setup
[    0.906986] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a85c9bff6, max_idle_ns: 881590591483 ns
[    0.917505] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.00 BogoMIPS (lpj=20000000)
[    0.927503] pid_max: default: 32768 minimum: 301
[    0.927503] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.927503] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.927503] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.927503] process: using mwait in idle threads
[    0.927503] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.927503] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.927503] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.927503] Spectre V2 : Mitigation: Retpolines
[    0.927503] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.927503] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.927503] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.927503] MMIO Stale Data: Unknown: No mitigations
[    0.927503] Freeing SMP alternatives memory: 40K
[    0.927503] smpboot: CPU0: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.927846] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.937509] ... version:                3
[    0.941522] ... bit width:              40
[    0.945620] ... generic registers:      2
[    0.947507] ... value mask:             000000ffffffffff
[    0.952825] ... max period:             0000007fffffffff
[    0.957506] ... fixed-purpose events:   3
[    0.961515] ... event mask:             0000000700000003
[    0.967062] rcu: Hierarchical SRCU implementation.
[    0.967605] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.975399] smp: Bringing up secondary CPUs ...
[    0.977762] x86: Booting SMP configuration:
[    0.981949] .... node  #0, CPUs:      #1 #2 #3
[    0.983094] smp: Brought up 1 node, 4 CPUs
[    0.991610] smpboot: Max logical packages: 1
[    0.995885] smpboot: Total of 4 processors activated (16000.00 BogoMIPS)
[    0.998226] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.007518] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    1.014452] pinctrl core: initialized pinctrl subsystem
[    1.018057] NET: Registered protocol family 16
[    1.022920] thermal_sys: Registered thermal governor 'step_wise'
[    1.022923] thermal_sys: Registered thermal governor 'user_space'
[    1.032031] cpuidle: using governor ladder
[    1.037630] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    1.045200] ACPI: bus type PCI registered
[    1.047508] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.060495] PCI: Using configuration type 1 for base access
[    1.066449] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.078881] cryptd: max_cpu_qlen set to 1000
[    1.083819] ACPI: Added _OSI(Module Device)
[    1.083819] ACPI: Added _OSI(Processor Device)
[    1.086890] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.087514] ACPI: Added _OSI(Processor Aggregator Device)
[    1.092912] ACPI: Added _OSI(Linux-Dell-Video)
[    1.097358] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.107509] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    1.127012] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    1.144108] ACPI: Interpreter enabled
[    1.147527] ACPI: (supports S0 S5)
[    1.150933] ACPI: Using IOAPIC for interrupt routing
[    1.155974] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.158446] ACPI: Enabled 9 GPEs in block 00 to 3F
[    1.182440] ACPI: Power Resource [USBC] (on)
[    1.188642] ACPI: Power Resource [PLPE] (on)
[    1.193395] ACPI: Power Resource [PLPE] (on)
[    1.205528] ACPI: Power Resource [CLK0] (on)
[    1.207603] ACPI: Power Resource [CLK1] (on)
[    1.333581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.337519] acpi PNP0A08:00: _OSC: OS supports [Segments MSI HPX-Type3]
[    1.344293] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    1.348098] PCI host bridge to bus 0000:00
[    1.352203] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    1.367511] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    1.374300] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    1.377509] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.384298] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.387513] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    1.394992] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    1.407509] pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0a15fff window]
[    1.414994] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.417527] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    1.430068] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    1.430068] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    1.433795] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    1.447522] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
[    1.453113] pci 0000:00:02.0: BAR 2: assigned to efifb
[    1.460038] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[    1.463783] pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
[    1.467517] pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
[    1.473102] pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
[    1.477515] pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
[    1.483100] pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
[    1.487516] pci 0000:00:13.0: reg 0x24: [mem 0xd0a15000-0xd0a157ff]
[    1.493833] pci 0000:00:13.0: PME# supported from D3hot
[    1.505776] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
1 Like
[    1.505776] pci 0000:00:14.0: reg 0x10: [mem 0xd0a00000-0xd0a0ffff 64bit]
[    1.517573] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.524699] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    1.527530] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[    1.533815] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[    1.537611] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    1.549163] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    1.549163] pci 0000:00:1b.0: reg 0x10: [mem 0xd0a10000-0xd0a13fff 64bit]
[    1.554389] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.567730] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    1.573809] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.580787] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    1.583809] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.593183] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[    1.593811] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.605577] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    1.605577] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.617961] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    1.624257] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    1.627543] pci 0000:00:1f.3: reg 0x10: [mem 0xd0a14000-0xd0a1401f]
[    1.633883] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    1.642602] pci 0000:01:00.0: [8086:150c] type 00 class 0x020000
[    1.643955] pci 0000:01:00.0: reg 0x10: [mem 0xd0900000-0xd091ffff]
[    1.647540] pci 0000:01:00.0: reg 0x18: [io  0xe000-0xe01f]
[    1.653133] pci 0000:01:00.0: reg 0x1c: [mem 0xd0920000-0xd0923fff]
[    1.657650] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.673241] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.677511] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    1.683607] pci 0000:00:1c.0:   bridge window [mem 0xd0900000-0xd09fffff]
[    1.687611] pci 0000:02:00.0: [8086:150c] type 00 class 0x020000
[    1.693650] pci 0000:02:00.0: reg 0x10: [mem 0xd0800000-0xd081ffff]
[    1.697544] pci 0000:02:00.0: reg 0x18: [io  0xd000-0xd01f]
[    1.703135] pci 0000:02:00.0: reg 0x1c: [mem 0xd0820000-0xd0823fff]
[    1.707651] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.721786] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.721786] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    1.723609] pci 0000:00:1c.1:   bridge window [mem 0xd0800000-0xd08fffff]
[    1.737605] pci 0000:03:00.0: [8086:150c] type 00 class 0x020000
[    1.743642] pci 0000:03:00.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
[    1.747539] pci 0000:03:00.0: reg 0x18: [io  0xc000-0xc01f]
[    1.753125] pci 0000:03:00.0: reg 0x1c: [mem 0xd0720000-0xd0723fff]
[    1.757655] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.770319] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.770319] pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
[    1.773609] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    1.787608] pci 0000:04:00.0: [8086:150c] type 00 class 0x020000
[    1.793644] pci 0000:04:00.0: reg 0x10: [mem 0xd0600000-0xd061ffff]
[    1.797540] pci 0000:04:00.0: reg 0x18: [io  0xb000-0xb01f]
[    1.803134] pci 0000:04:00.0: reg 0x1c: [mem 0xd0620000-0xd0623fff]
[    1.807654] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    1.818867] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    1.818867] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    1.823616] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.827529] pci_bus 0000:00: on NUMA node 0
[    1.836849] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.836849] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.847638] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.854652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.857639] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.864653] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.877642] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.884659] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.898208] SCSI subsystem initialized
[    1.902082] libata version 3.00 loaded.
[    1.902082] ACPI: bus type USB registered
[    1.906220] usbcore: registered new interface driver usbfs
[    1.907505] usbcore: registered new interface driver hub
[    1.911797] usbcore: registered new device driver usb
[    1.917516] Registered efivars operations
[    1.926512] PCI: Using ACPI for IRQ routing
[    1.927513] PCI: pci_cache_line_size set to 64 bytes
[    1.927579] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[    1.927582] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[    1.927585] e820: reserve RAM buffer [mem 0x793e7000-0x7bffffff]
[    1.927588] e820: reserve RAM buffer [mem 0x79c06000-0x7bffffff]
[    1.927591] e820: reserve RAM buffer [mem 0x79dbd000-0x7bffffff]
[    1.927593] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    1.931216] clocksource: Switched to clocksource tsc-early
[    1.933460] pnp: PnP ACPI init
[    1.936936] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.936936] system 00:01: [io  0x0680-0x069f] has been reserved
[    1.942521] system 00:01: [io  0x0400-0x047f] has been reserved
[    1.948447] system 00:01: [io  0x0500-0x05fe] has been reserved
[    1.954369] system 00:01: [io  0x0600-0x061f] has been reserved
[    1.960306] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.960650] system 00:02: [io  0x0a00-0x0a2f] has been reserved
[    1.966575] system 00:02: [io  0x0a30-0x0a3f] has been reserved
[    1.972506] system 00:02: [io  0x0a40-0x0a4f] has been reserved
[    1.978445] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.978522] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.978633] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.979167] pnp 00:05: [dma 0 disabled]
[    1.979260] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.979781] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.986752] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.993377] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
[    2.000001] system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
[    2.006622] system 00:06: [mem 0xfed0c000-0xfed0ffff] has been reserved
[    2.013240] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
[    2.019862] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    2.026477] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    2.033096] system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved
[    2.039730] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.042164] pnp: PnP ACPI: found 7 devices
[    2.052808] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.061757] NET: Registered protocol family 2
[    2.066253] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    2.074388] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    2.082942] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.090918] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    2.098319] TCP: Hash tables configured (established 16384 bind 16384)
[    2.104921] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.111643] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.118888] NET: Registered protocol family 1
[    2.123274] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    2.134754] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    2.146235] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    2.157713] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    2.169213] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    2.177053] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    2.184899] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    2.192745] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    2.200585] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    2.205552] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    2.211650] pci 0000:00:1c.0:   bridge window [mem 0xd0900000-0xd09fffff]
[    2.218446] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    2.226190] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    2.231165] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    2.237264] pci 0000:00:1c.1:   bridge window [mem 0xd0800000-0xd08fffff]
[    2.244060] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    2.251815] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    2.256781] pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
[    2.262879] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    2.269674] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    2.277420] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    2.282399] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    2.288502] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    2.295290] pci 0000:00:1c.3:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    2.303049] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    2.308630] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    2.314814] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    2.320997] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    2.327180] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    2.334057] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    2.340941] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    2.347906] pci_bus 0000:00: resource 11 [mem 0x80000000-0xd0a15fff window]
[    2.354872] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    2.360454] pci_bus 0000:01: resource 1 [mem 0xd0900000-0xd09fffff]
[    2.366719] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    2.373944] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    2.379524] pci_bus 0000:02: resource 1 [mem 0xd0800000-0xd08fffff]
[    2.385795] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    2.393019] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    2.398604] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
[    2.404869] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    2.412093] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    2.417678] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff]
[    2.423946] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    2.431308] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.440173] PCI: CLS 64 bytes, default 64
[    2.444444] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85c9bff6, max_idle_ns: 881590591483 ns
[    2.454516] clocksource: Switched to clocksource tsc
[    2.460239] simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0x1d5000 bytes, mapped to 0x00000000dbb8e96b
[    2.471473] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
[    2.483938] Console: switching to colour frame buffer device 100x37
[    2.493296] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    2.501606] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    2.509886] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.516083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.524926] hv_vmbus: registering driver hyperv_fb
[    2.529838] intel_idle: MWAIT substates: 0x33000020
[    2.529840] intel_idle: v0.5.1 model 0x37
[    2.530528] intel_idle: Local APIC timer is reliable in all C-states
[    2.530801] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.539311] ACPI: Sleep Button [SLPB]
[    2.543107] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.550679] ACPI: Power Button [PWRF]
[    2.556748] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    2.583934] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.592582] hpet: number irqs doesn't agree with number of timers
[    2.600670] Non-volatile memory driver v1.3
[    2.606816] Linux agpgart interface v0.103
[    2.613475] checking generic (c0000000 1d5000) vs hw (d0000000 400000)
[    2.613479] checking generic (c0000000 1d5000) vs hw (c0000000 10000000)
[    2.613482] fb0: switching to inteldrmfb from simple
[    2.620396] Console: switching to colour dummy device 80x25
[    2.645950] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[    2.654735] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.662090] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    2.673806] loop: module loaded
[    2.677026] Guest personality initialized and is inactive
[    2.682487] VMCI host device registered (name=vmci, major=10, minor=63)
[    2.689126] Initialized host personality
[    2.693297] Loading iSCSI transport class v2.0-870.
[    2.698727] VMware PVSCSI driver - version 1.0.7.0-k
[    2.703754] hv_vmbus: registering driver hv_storvsc
[    2.709107] ahci 0000:00:13.0: version 3.0
[    2.709321] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[    2.726013] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.734121] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
[    2.741898] scsi host0: ahci
[    2.745102] scsi host1: ahci
[    2.748122] ata1: SATA max UDMA/133 abar m2048@0xd0a15000 port 0xd0a15100 irq 92
[    2.755521] ata2: SATA max UDMA/133 abar m2048@0xd0a15000 port 0xd0a15180 irq 92
[    2.763195] VMware vmxnet3 virtual NIC driver - version 1.5.0.0-k-NAPI
[    2.769757] hv_vmbus: registering driver hv_netvsc
[    2.774551] Fusion MPT base driver 3.04.20
[    2.778655] Copyright (c) 1999-2008 LSI Corporation
[    2.783547] Fusion MPT SPI Host driver 3.04.20
[    2.788023] Fusion MPT SAS Host driver 3.04.20
[    2.792508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.799047] ehci-pci: EHCI PCI platform driver
[    2.803519] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.809720] ohci-pci: OHCI PCI platform driver
[    2.814190] ohci-platform: OHCI generic platform driver
[    2.819447] uhci_hcd: USB Universal Host Controller Interface driver
[    2.826086] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.831334] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.839812] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    2.848950] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.856199] hub 1-0:1.0: USB hub found
[    2.859991] hub 1-0:1.0: 6 ports detected
[    2.864855] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.870108] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.877525] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.884116] hub 2-0:1.0: USB hub found
[    2.887910] hub 2-0:1.0: 1 port detected
[    2.892167] usbcore: registered new interface driver usb-storage
[    2.898274] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.906931] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.911923] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.916999] hv_vmbus: registering driver hyperv_keyboard
[    2.922400] rtc_cmos 00:00: RTC can wake from S4
[    2.927307] rtc_cmos 00:00: registered as rtc0
[    2.928578] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[    2.937959] rtc_cmos 00:00: setting system clock to 2022-10-27T19:38:40 UTC (1666899520)
[    2.937962] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    2.953511] intel_pstate: Intel P-state driver initializing
[    2.959434] sdhci: Secure Digital Host Controller Interface driver
[    2.965618] sdhci: Copyright(c) Pierre Ossman
[    2.970420] hid: raw HID events driver (C) Jiri Kosina
[    2.975585] hv_vmbus: registering driver hid_hyperv
[    2.980507] usbcore: registered new interface driver usbhid
[    2.986083] usbhid: USB HID core driver
[    2.990091] hv_utils: Registering HyperV Utility Driver
[    2.995321] hv_vmbus: registering driver hv_utils
[    3.000034] hv_vmbus: registering driver hv_balloon
[    3.005175] NET: Registered protocol family 10
[    3.010059] Segment Routing with IPv6
[    3.013770] NET: Registered protocol family 17
[    3.018259] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.031211] 8021q: 802.1Q VLAN Support v1.8
[    3.035443] NET: Registered protocol family 40
[    3.040398] microcode: sig=0x30678, pf=0x4, revision=0x833
[    3.045939] microcode: Microcode Update Driver: v2.2.
[    3.045946] IPI shorthand broadcast: enabled
[    3.055302] sched_clock: Marking stable (2173933172, 877073952)->(3203919048, -152911924)
[    3.063532] registered taskstats version 1
[    3.088686] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.095021] ata1: SATA link down (SStatus 0 SControl 300)
[    3.102710] ata2.00: ATA-9: ssd, AOTEN04, max UDMA/133
[    3.107960] ata2.00: 61865984 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.125133] ata2.00: configured for UDMA/133
[    3.129664] scsi 1:0:0:0: Direct-Access     ATA      ssd              N04  PQ: 0 ANSI: 5
[    3.138495] sd 1:0:0:0: [sda] 61865984 512-byte logical blocks: (31.7 GB/29.5 GiB)
[    3.146241] sd 1:0:0:0: [sda] Write Protect is off
[    3.151137] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.151190] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.162210] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    3.169768] GPT:246304 != 61865983
[    3.173239] GPT:Alternate GPT header not at the end of the disk.
[    3.179357] GPT:246304 != 61865983
[    3.182823] GPT: Use GNU Parted to correct GPT errors.
[    3.188077]  sda: sda1 sda2 sda128
[    3.192225] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.239077] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[    3.305909] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[    3.313114] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    3.320815] Freeing unused kernel image (initmem) memory: 1464K
[    3.357531] Write protecting the kernel read-only data: 20480k
[    3.364611] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    3.372370] Freeing unused kernel image (rodata/data gap) memory: 2020K
[    3.379196] Run /sbin/init as init process
[    3.383357]   with arguments:
[    3.383359]     /sbin/init
[    3.383360]   with environment:
[    3.383362]     HOME=/
[    3.383363]     TERM=linux
[    3.383365]     BOOT_IMAGE=/boot/vmlinuz
[    3.396060] init: Console is alive
[    3.427203] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.436223] pps_core: LinuxPPS API ver. 1 registered
[    3.441308] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.451887] PTP clock support registered
[    3.457875] Button Hotplug driver version 0.4.1
[    3.464218] igb: Intel(R) Gigabit Ethernet Network Driver
[    3.469768] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.475718] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.490437] init: - preinit -
[    3.540979] random: jshn: uninitialized urandom read (4 bytes read)
[    3.561650] random: jshn: uninitialized urandom read (4 bytes read)
[    3.571962] random: jshn: uninitialized urandom read (4 bytes read)
[    3.587570] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[    7.642723] random: jshn: uninitialized urandom read (4 bytes read)
[    7.655006] mount_root: mounting /dev/root
[    7.661025] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.707165] random: procd: uninitialized urandom read (4 bytes read)
[    7.760131] urandom-seed: Seed file not found (/etc/urandom.seed)
[    7.772995] procd: - early -
[    8.306178] procd: - ubus -
[    8.313095] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.362140] procd: - init -
[    8.431082] urngd: v1.0.2 started.
[    8.447073] random: crng init done
[    8.450259] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.450584] random: 27 urandom warning(s) missed due to ratelimiting
[    8.478165] e1000: Intel(R) PRO/1000 Network Driver
[    8.483150] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    8.493822] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[    8.500060] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    8.508270] i2c /dev entries driver
[    8.529018] e1000e: Intel(R) PRO/1000 Network Driver
[    8.534075] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    8.540361] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to simplified (2000-8000 ints) mode
[    8.550454] e1000e 0000:01:00.0: Interrupt Mode set to 1
[    8.623843] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock
[    8.695006] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:90:27:ed:b7:f4
[    8.703088] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    8.710180] e1000e 0000:01:00.0 eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
[    8.717248] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to simplified (2000-8000 ints) mode
[    8.793804] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock
[    8.865034] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:90:27:ed:b7:f5
[    8.873148] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    8.880253] e1000e 0000:02:00.0 eth1: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
[    8.887323] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to simplified (2000-8000 ints) mode
[    8.960513] e1000e 0000:03:00.0 0000:03:00.0 (uninitialized): registered PHC clock
[    9.033896] e1000e 0000:03:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:90:27:ed:b7:f6
[    9.041981] e1000e 0000:03:00.0 eth2: Intel(R) PRO/1000 Network Connection
[    9.049091] e1000e 0000:03:00.0 eth2: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
[    9.056188] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to simplified (2000-8000 ints) mode
[    9.133783] e1000e 0000:04:00.0 0000:04:00.0 (uninitialized): registered PHC clock
[    9.205036] e1000e 0000:04:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 00:90:27:ed:b7:f7
[    9.213105] e1000e 0000:04:00.0 eth3: Intel(R) PRO/1000 Network Connection
[    9.220194] e1000e 0000:04:00.0 eth3: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
[    9.230858] Intel(R) 2.5G Ethernet Linux Driver
[    9.235480] Copyright(c) 2018 Intel Corporation.
[    9.297124] PPP generic driver version 2.4.2
[    9.302724] NET: Registered protocol family 24
[    9.316532] kmodloader: done loading kernel modules from /etc/modules.d/*
[   14.288305] 8021q: adding VLAN 0 to HW filter on device eth0
[   14.294245] br-lan: port 1(eth0) entered blocking state
[   14.299566] br-lan: port 1(eth0) entered disabled state
[   14.305014] device eth0 entered promiscuous mode
[   14.508292] 8021q: adding VLAN 0 to HW filter on device eth1
[   25.908833] e1000e 0000:01:00.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   25.917899] br-lan: port 1(eth0) entered blocking state
[   25.923223] br-lan: port 1(eth0) entered forwarding state
[   25.928894] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   27.038138] e1000e 0000:01:00.0 eth0: NIC Link is Down
[   27.043488] br-lan: port 1(eth0) entered disabled state
[   29.898783] e1000e 0000:01:00.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   29.907744] br-lan: port 1(eth0) entered blocking state
[   29.913062] br-lan: port 1(eth0) entered forwarding state
[   30.977928] e1000e 0000:01:00.0 eth0: NIC Link is Down
[   30.983208] br-lan: port 1(eth0) entered disabled state
[   33.908778] e1000e 0000:01:00.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   33.917839] br-lan: port 1(eth0) entered blocking state
[   33.923166] br-lan: port 1(eth0) entered forwarding state

2 Likes