# Same BSSID Problem

**URL:** <https://forum.openwrt.org/t/same-bssid-problem/64292>\
**Category:** Network and Wireless Configuration\
**Created:** [May 20, 2020, 2:18pm UTC](https://forum.openwrt.org/t/same-bssid-problem/64292 "2020-05-20T14:18:11Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![emin](https://forum.openwrt.org/letter_avatar/emin/32/6_449c533f586939b6e5f246632a46421f.png) [@emin](https://forum.openwrt.org/u/emin)\
**Post date:** [May 20, 2020, 2:18pm UTC](https://forum.openwrt.org/t/same-bssid-problem/64292/1 "2020-05-20T14:18:11Z")

</div>

Hello, I have the same BSSID for two wireless network one is 5ghz (E), other 2.4ghz(E-Global). How can I change BSSID for one of them?

 ![Screenshot_20200520_171138](https://forum.openwrt.org/uploads/default/original/3X/c/a/cab8de57ba31cb9a0520b500c0bca2ee492bdbc9.png)

/etc/config/wireless

```
config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11a'
        option path 'pci0000:00/0000:00:00.0/0000:01:00.0'
        option country 'TR'
        option htmode 'VHT80'
        option channel '36'
        option legacy_rates '0'

config wifi-device 'radio1'
        option type 'mac80211'
        option hwmode '11g'
        option path 'platform/10180000.wmac'
        option country 'TR'
        option legacy_rates '0'
        option channel '8'
        option htmode 'HT20'

config wifi-iface 'wifinet0'
        option device 'radio1'
        option mode 'ap'
        option encryption 'psk2'
        option skip_inactivity_poll '1'
        option wpa_group_rekey '0'
        option wpa_pair_rekey '0'
        option wpa_master_rekey '0'
        option key ' *********'
        option network 'lan'
        option ssid 'E-2.4Ghz'

config wifi-iface 'wifinet1'
        option device 'radio0'
        option mode 'ap'
        option skip_inactivity_poll '1'
        option encryption 'psk2'
        option key ' *********'
        option network 'lan'
        option ssid 'E'

config wifi-iface 'wifinet3'
        option device 'radio1'
        option mode 'ap'
        option encryption 'none'
        option ssid 'E-Global'

```

---

<div class="post-metadata">

**Author:** ![lleachii](https://forum.openwrt.org/letter_avatar/lleachii/32/6_449c533f586939b6e5f246632a46421f.png) [@lleachii](https://forum.openwrt.org/u/lleachii)\
**Post date:** [May 20, 2020, 2:23pm UTC](https://forum.openwrt.org/t/same-bssid-problem/64292/2 "2020-05-20T14:23:12Z")

</div>

@emin, welcome to the community!

> [@emin](#):
>
> How can I change BSSID for one of them?

I'm curious, why do you wish to?

Also, it's not a problem that they have the same BSSID, as they're on different frequency bands (i.e. 2.4 GHz vs. 5.4 GHz)!

* * *

And to make the change, you add `option macaddr 'xx:xx:xx:xx:xx:xx'` to the respective `config wifi-iface` section.

See: [Still need help changing my mac address? - #16 by lleachii](https://forum.openwrt.org/t/still-need-help-changing-my-mac-address/63787/16)

---

<div class="post-metadata">

**Author:** ![emin](https://forum.openwrt.org/letter_avatar/emin/32/6_449c533f586939b6e5f246632a46421f.png) [@emin](https://forum.openwrt.org/u/emin)\
**Post date:** [May 20, 2020, 2:28pm UTC](https://forum.openwrt.org/t/same-bssid-problem/64292/3 "2020-05-20T14:28:08Z")

</div>

Thanks, I will check. I cannot see both on an Android device when they are in range. I see (E) wireless, and when I go out its scope, I can see (E-Global) wireless. Weirdly, in iOS and Linux it is ok.

---

<div class="post-metadata">

**Author:** ![lleachii](https://forum.openwrt.org/letter_avatar/lleachii/32/6_449c533f586939b6e5f246632a46421f.png) [@lleachii](https://forum.openwrt.org/u/lleachii)\
**Post date:** [May 20, 2020, 2:36pm UTC](https://forum.openwrt.org/t/same-bssid-problem/64292/4 "2020-05-20T14:36:29Z")

</div>

That's normal behavior; see:

- ["Bind" client to specific SSID vs "band steering"](https://forum.openwrt.org/t/bind-client-to-specific-ssid-vs-band-steering/19699)
- [Dual-band SSID Best Practices?](https://forum.openwrt.org/t/dual-band-ssid-best-practices/19084)

---

<div class="post-metadata">

**Author:** ![trendy](https://forum.openwrt.org/user_avatar/forum.openwrt.org/trendy/32/8800_2.png) [@trendy](https://forum.openwrt.org/u/trendy)\
**Post date:** [May 20, 2020, 3:17pm UTC](https://forum.openwrt.org/t/same-bssid-problem/64292/5 "2020-05-20T15:17:56Z")

</div>

I agree with @lleachii that the same BSSID is not an issue. I have dual band AP with the same name on both bands and no client has issues to connect to them, especially 3 Androids.
