I am following this manual to install samba. I'm following this guide to install Samba. I'm missing two packages that don't appear when I run a software update.
USB: kmod-usb3 kmod-usb-storage-uas usbutils block-mount mount-utils
do not exist in the repository
kmod-usb-storage-uas usbutils
Any solution to be able to use the router's USB? Tranks
when I run a software update.
how do you do that?
What system are you running
ubus call system board
In addition to the info requested by @brada4 , let's also see:
opkg update
opkg install kmod-usb-storage-uas usbutils
if those don't work, what happens if you do:
opkg update
opkg find kmod-usb-storage-uas
opkg find usbutils
|Nombre de host|OpenWrt|
|Modelo|Xiaomi AX9000|
|Arquitectura|ARMv8 Processor rev 4|
|Plataforma de destino|qualcommax/ipq807x|
|Versión del firmware|OpenWrt SNAPSHOT r0-957029c3 / LuCI Master 25.288.38975~45a3a47|
Versión del núcleo 6.12.51
This version is not compatible with kmod-usb-storage-uas usbutils does not appear in the software nor does it allow manual installation.
I use the mod version by AgustinLorenzo
Since that is not provided by the official OpenWrt project, you need to ask the author/maintainer of the version you are using.
Ask @AgustinLorenzo (or install OpenWrt)
This topic was automatically closed after 60 minutes. New replies are no longer allowed.