I am trying the rtl8xxxu driver with the 8192cu and 8192eu adapters, the drivers are loading the firmware, but Luci still shows Device not active for an unknown reason.
Kernel.log:
OpenWrt 22.03.0, r19685-512e76967f
-----------------------------------------------------
root@OpenWrt:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.138 (m@AMILO-La1703-b87200ad) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r19685-512e76967f) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sat Sep 3 02:55:34 2022
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Lamobo R1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] OF: reserved mem: node default-pool compatible matching fail
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff]
[ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] percpu: Embedded 15 pages/cpu s30732 r8192 d22516 u61440
[ 0.000000] pcpu-alloc: s30732 r8192 d22516 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1024948K/1048576K available (7518K kernel code, 832K rwdata, 1996K rodata, 2048K init, 253K bss, 23628K reserved, 0K cma-reserved, 262144K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000023] Switching to timer-based delay loop, resolution 41ns
[ 0.000430] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000750] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
[ 0.001058] Console: colour dummy device 80x30
[ 0.001126] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001149] pid_max: default: 32768 minimum: 301
[ 0.001313] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001335] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002378] CPU: Testing write buffer coherency: ok
[ 0.002839] /cpus/cpu@0 missing clock-frequency property
[ 0.002871] /cpus/cpu@1 missing clock-frequency property
[ 0.002886] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003793] Setting up static identity map for 0x40200000 - 0x40200060
[ 0.003984] rcu: Hierarchical SRCU implementation.
[ 0.004238] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.005309] smp: Bringing up secondary CPUs ...
[ 0.016220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.016385] smp: Brought up 1 node, 2 CPUs
[ 0.016409] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[ 0.016418] CPU: All CPU(s) started in HYP mode.
[ 0.016425] CPU: Virtualization extensions available.
[ 0.023431] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.023772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.023803] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.024053] pinctrl core: initialized pinctrl subsystem
[ 0.026247] NET: Registered protocol family 16
[ 0.026740] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.028204] thermal_sys: Registered thermal governor 'step_wise'
[ 0.028622] No ATAGs?
[ 0.087738] SCSI subsystem initialized
[ 0.088540] libata version 3.00 loaded.
[ 0.088837] usbcore: registered new interface driver usbfs
[ 0.088921] usbcore: registered new interface driver hub
[ 0.089001] usbcore: registered new device driver usb
[ 0.089371] pps_core: LinuxPPS API ver. 1 registered
[ 0.089388] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.089422] PTP clock support registered
[ 0.089760] Advanced Linux Sound Architecture Driver Initialized.
[ 0.092767] clocksource: Switched to clocksource arch_sys_counter
[ 0.098806] NET: Registered protocol family 2
[ 0.099215] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.100387] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.100460] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.100547] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.100677] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.100833] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.100906] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.101225] NET: Registered protocol family 1
[ 0.118306] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.123306] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.123447] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.125271] bounce: pool size: 64 pages
[ 0.126409] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO
[ 0.130861] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.145750] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.147874] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator
[ 0.148615] printk: console [ttyS0] disabled
[ 0.168910] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 56, base_baud = 1500000) is a U6_16550A
[ 0.758427] printk: console [ttyS0] enabled
[ 0.763371] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
[ 0.792353] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 57, base_baud = 1500000) is a U6_16550A
[ 0.801987] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator
[ 0.832887] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 58, base_baud = 1500000) is a U6_16550A
[ 0.851268] loop: module loaded
[ 0.861599] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 0.873515] tun: Universal TUN/TAP device driver, 1.6
[ 0.879352] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[ 0.887836] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
[ 0.894247] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
[ 0.900333] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[ 0.906136] sun7i-dwmac 1c50000.ethernet: no reset control found
[ 0.913864] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.920414] ehci-platform: EHCI generic platform driver
[ 0.926380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.932647] ohci-platform: OHCI generic platform driver
[ 0.938414] usbcore: registered new interface driver usb-storage
[ 0.945293] mousedev: PS/2 mouse device common for all mice
[ 0.952507] i2c /dev entries driver
[ 0.957530] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[ 0.969238] axp20x-gpio axp20x-gpio: DMA mask not set
[ 0.976077] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
[ 0.983720] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
[ 1.002186] vdd-rtc: supplied by regulator-dummy
[ 1.007818] avcc: supplied by regulator-dummy
[ 1.013747] ldo3: supplied by regulator-dummy
[ 1.018458] ldo4: supplied by regulator-dummy
[ 1.023681] ldo5: supplied by regulator-dummy
[ 1.028633] vdd-cpu: supplied by regulator-dummy
[ 1.034182] vdd-int-dll: supplied by regulator-dummy
[ 1.041466] axp20x-i2c 0-0034: AXP20X driver loaded
[ 1.048177] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set
[ 1.073692] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 1.086818] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[ 1.087438] sun4i-ss 1c15000.crypto-engine: Die ID 0
[ 1.100715] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 1.104275] NET: Registered protocol family 10
[ 1.111268] Segment Routing with IPv6
[ 1.115117] NET: Registered protocol family 17
[ 1.119922] can: controller area network core
[ 1.124420] NET: Registered protocol family 29
[ 1.128868] 8021q: 802.1Q VLAN Support v1.8
[ 1.133235] Registering SWP/SWPB emulation handler
[ 1.143169] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[ 1.155589] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[ 1.164219] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
[ 1.170605] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
[ 1.176720] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[ 1.182485] sun7i-dwmac 1c50000.ethernet: no reset control found
[ 1.213962] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.223754] mmc0: Problem switching card into high-speed mode!
[ 1.229732] mmc0: new SDHC card at address 0001
[ 1.235617] mmcblk0: mmc0:0001 SD16G 14.5 GiB
[ 1.241752] mmcblk0: p1 p2
[ 1.302937] sun7i-dwmac 1c50000.ethernet: Version ID not available
[ 1.309146] sun7i-dwmac 1c50000.ethernet: DWMAC1000
[ 1.314150] sun7i-dwmac 1c50000.ethernet: No HW DMA feature register supported
[ 1.321370] sun7i-dwmac 1c50000.ethernet: TX Checksum insertion supported
[ 1.328174] sun7i-dwmac 1c50000.ethernet: Normal descriptors
[ 1.333849] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
[ 1.342025] bcm53xx stmmac-0:1e: found switch: BCM53125, rev 4
[ 1.347997] bcm53xx stmmac-0:1e: failed to register switch: -517
[ 1.356811] ehci-platform 1c14000.usb: EHCI Host Controller
[ 1.362450] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 1.370450] ehci-platform 1c14000.usb: irq 41, io mem 0x01c14000
[ 1.402594] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 1.408962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.417281] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.424531] usb usb1: Product: EHCI Host Controller
[ 1.429408] usb usb1: Manufacturer: Linux 5.10.138 ehci_hcd
[ 1.434990] usb usb1: SerialNumber: 1c14000.usb
[ 1.440132] hub 1-0:1.0: USB hub found
[ 1.444019] hub 1-0:1.0: 1 port detected
[ 1.449308] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.455018] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 1.462984] ehci-platform 1c1c000.usb: irq 46, io mem 0x01c1c000
[ 1.492585] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.498911] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.507193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.514419] usb usb2: Product: EHCI Host Controller
[ 1.519294] usb usb2: Manufacturer: Linux 5.10.138 ehci_hcd
[ 1.524869] usb usb2: SerialNumber: 1c1c000.usb
[ 1.529993] hub 2-0:1.0: USB hub found
[ 1.533870] hub 2-0:1.0: 1 port detected
[ 1.539161] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[ 1.545876] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
[ 1.553909] ohci-platform 1c14400.usb: irq 42, io mem 0x01c14400
[ 1.626799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 1.635100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.642316] usb usb3: Product: Generic Platform OHCI controller
[ 1.648244] usb usb3: Manufacturer: Linux 5.10.138 ohci_hcd
[ 1.653822] usb usb3: SerialNumber: 1c14400.usb
[ 1.658936] hub 3-0:1.0: USB hub found
[ 1.662817] hub 3-0:1.0: 1 port detected
[ 1.668186] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator
[ 1.677224] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowed for exclusive requests
[ 1.687629] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 1.693475] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 4
[ 1.701704] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.710017] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.717275] usb usb4: Product: MUSB HDRC host driver
[ 1.722239] usb usb4: Manufacturer: Linux 5.10.138 musb-hcd
[ 1.727826] usb usb4: SerialNumber: musb-hdrc.1.auto
[ 1.733457] hub 4-0:1.0: USB hub found
[ 1.737291] hub 4-0:1.0: 1 port detected
[ 1.742707] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 1.744692] bcm53xx stmmac-0:1e: found switch: BCM53125, rev 4
[ 1.832598] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.846682] bcm53xx stmmac-0:1e lan2 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
[ 1.858543] bcm53xx stmmac-0:1e lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
[ 1.870386] bcm53xx stmmac-0:1e lan4 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
[ 1.882372] bcm53xx stmmac-0:1e wan (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
[ 1.894223] bcm53xx stmmac-0:1e lan1 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
[ 1.908903] bcm53xx stmmac-0:1e: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
[ 1.920213] bcm53xx stmmac-0:1e: Configured port 8 for rgmii-txid
[ 1.927227] DSA: tree 0 setup
[ 1.930908] ALSA device list:
[ 1.933940] No soundcards found.
[ 1.946209] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 1.954792] usb 1-1: New USB device found, idVendor=0bda, idProduct=818b, bcdDevice= 2.00
[ 1.956300] Freeing unused kernel memory: 2048K
[ 1.963094] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.974756] usb 1-1: Product: 802.11n NIC
[ 1.978765] usb 1-1: Manufacturer: Realtek
[ 1.982876] usb 1-1: SerialNumber: 000F0033B37C
[ 2.022795] Run /sbin/init as init process
[ 2.026914] with arguments:
[ 2.026920] /sbin/init
[ 2.026924] earlyprintk
[ 2.026928] with environment:
[ 2.026933] HOME=/
[ 2.026937] TERM=linux
[ 2.034543] usb 2-1: New USB device found, idVendor=0bda, idProduct=8178, bcdDevice= 2.00
[ 2.042821] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.049965] usb 2-1: Product: 802.11n WLAN Adapter
[ 2.054842] usb 2-1: Manufacturer: Realtek
[ 2.058950] usb 2-1: SerialNumber: 00e04c000001
[ 2.323655] init: Console is alive
[ 2.327392] init: - watchdog -
[ 2.959924] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.042966] ehci-fsl: Freescale EHCI Host controller driver
[ 3.051752] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator
[ 3.059579] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator
[ 3.162614] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 3.170115] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 3.176037] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 3.185014] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 3.194159] scsi host0: ahci-sunxi
[ 3.198031] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 45
[ 3.534019] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.546249] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.563357] init: - preinit -
[ 4.119704] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.196440] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.226737] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.425445] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found
[ 4.432849] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled
[ 4.440162] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available
[ 4.447855] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW
[ 4.455704] sun7i-dwmac 1c50000.ethernet eth0: configuring for fixed/rgmii link mode
[ 4.463672] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 4.479100] bcm53xx stmmac-0:1e lan1: configuring for phy/gmii link mode
[ 4.486179] 8021q: adding VLAN 0 to HW filter on device lan1
[ 8.704670] mount_root: loading kmods from internal overlay
[ 8.729334] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 8.741434] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 8.995087] block: attempting to load /etc/config/fstab
[ 9.003473] block: unable to load configuration (fstab: Entry not found)
[ 9.010340] block: no usable configuration
[ 9.134616] EXT4-fs (loop0): recovery complete
[ 9.140551] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 9.182780] block: attempting to load /etc/config/fstab
[ 9.188227] block: unable to load configuration (fstab: Entry not found)
[ 9.195092] block: no usable configuration
[ 9.200398] mount_root: switching to ext4 overlay
[ 9.303505] urandom-seed: Seeding with /etc/urandom.seed
[ 9.397396] procd: - early -
[ 9.400498] procd: - watchdog -
[ 10.015171] procd: - watchdog -
[ 10.020496] procd: - ubus -
[ 10.071850] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.080135] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.087022] random: ubusd: uninitialized urandom read (4 bytes read)
[ 10.096288] procd: - init -
[ 10.702106] urngd: v1.0.2 started.
[ 10.770106] random: crng init done
[ 10.773658] random: 29 urandom warning(s) missed due to ratelimiting
[ 10.775844] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.968196] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 10.992493] b53_common: exports duplicate symbol b53_switch_alloc (owned by kernel)
[ 11.116560] sunxi-rtc 1c20d00.rtc: registered as rtc0
[ 11.121732] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01T00:53:46 UTC (3226)
[ 11.135873] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[ 11.143588] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[ 11.207258] usbcore: registered new interface driver ums-alauda
[ 11.215158] usbcore: registered new interface driver ums-cypress
[ 11.223015] usbcore: registered new interface driver ums-datafab
[ 11.230275] usbcore: registered new interface driver ums-freecom
[ 11.237588] usbcore: registered new interface driver ums-isd200
[ 11.244871] usbcore: registered new interface driver ums-jumpshot
[ 11.252176] usbcore: registered new interface driver ums-karma
[ 11.259411] usbcore: registered new interface driver ums-sddr09
[ 11.266659] usbcore: registered new interface driver ums-sddr55
[ 11.274009] usbcore: registered new interface driver ums-usbat
[ 11.300941] xt_time: kernel timezone is -0000
[ 11.401599] PPP generic driver version 2.4.2
[ 11.408430] NET: Registered protocol family 24
[ 11.578660] usb 1-1: Vendor: Realtek
[ 11.582258] usb 1-1: Product: 802.11n NIC
[ 11.586312] usb 1-1: Serial not available.
[ 11.590410] usb 1-1: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[ 11.597125] usb 1-1: 00: 29 81 00 7c 01 40 03 00
[ 11.601746] usb 1-1: 08: 40 74 04 50 14 00 00 00
[ 11.606375] usb 1-1: 10: 29 29 29 29 29 29 29 29
[ 11.610989] usb 1-1: 18: 29 2a 2a 01 ef ef ff ff
[ 11.615615] usb 1-1: 20: ff ff ff ff ff ff ff ff
[ 11.620229] usb 1-1: 28: ff ff ff ff ff ff ff ff
[ 11.624858] usb 1-1: 30: ff ff ff ff ff ff ff ff
[ 11.629472] usb 1-1: 38: ff ff 2e 2e 2e 2e 2e 2e
[ 11.634097] usb 1-1: 40: 2e 2e 2e 2e 2e 02 ef ef
[ 11.638711] usb 1-1: 48: ff ff ff ff ff ff ff ff
[ 11.643343] usb 1-1: 50: ff ff ff ff ff ff ff ff
[ 11.647957] usb 1-1: 58: ff ff ff ff ff ff ff ff
[ 11.652582] usb 1-1: 60: ff ff ff ff ff ff ff ff
[ 11.657196] usb 1-1: 68: ff ff ff ff ff ff ff ff
[ 11.661809] usb 1-1: 70: ff ff ff ff ff ff ff ff
[ 11.666433] usb 1-1: 78: ff ff ff ff ff ff ff ff
[ 11.671047] usb 1-1: 80: ff ff ff ff ff ff ff ff
[ 11.675671] usb 1-1: 88: ff ff ff ff ff ff ff ff
[ 11.680284] usb 1-1: 90: ff ff ff ff ff ff ff ff
[ 11.684909] usb 1-1: 98: ff ff ff ff ff ff ff ff
[ 11.689523] usb 1-1: a0: ff ff ff ff ff ff ff ff
[ 11.694152] usb 1-1: a8: ff ff ff ff ff ff ff ff
[ 11.698766] usb 1-1: b0: ff ff ff ff ff ff ff ff
[ 11.703397] usb 1-1: b8: 20 27 1a 00 00 00 ff ff
[ 11.708012] usb 1-1: c0: ff 01 00 10 00 00 00 ff
[ 11.712636] usb 1-1: c8: 00 00 ff ff ff ff ff ff
[ 11.717250] usb 1-1: d0: da 0b 8b 81 e6 47 02 00
[ 11.721863] usb 1-1: d8: 0f 00 33 b3 7c 09 03 52
[ 11.726487] usb 1-1: e0: 65 61 6c 74 65 6b 0d 03
[ 11.731100] usb 1-1: e8: 38 30 32 2e 31 31 6e 20
[ 11.735725] usb 1-1: f0: 4e 49 43 00 ff ff ff ff
[ 11.740339] usb 1-1: f8: ff ff ff ff ff ff ff ff
[ 11.744963] usb 1-1: 100: ff ff ff ff ff ff ff ff
[ 11.749662] usb 1-1: 108: ff ff ff ff ff ff ff ff
[ 11.754373] usb 1-1: 110: ff ff ff ff ff ff ff 0d
[ 11.759074] usb 1-1: 118: 03 00 05 00 30 00 00 00
[ 11.763790] usb 1-1: 120: 00 93 ff ff ff ff ff ff
[ 11.768490] usb 1-1: 128: ff ff ff ff ff ff ff ff
[ 11.773201] usb 1-1: 130: f6 a8 98 2d 03 92 98 00
[ 11.777902] usb 1-1: 138: fc 8c 00 11 9b 44 02 0a
[ 11.782613] usb 1-1: 140: ff ff ff ff ff ff ff ff
[ 11.787314] usb 1-1: 148: ff ff ff ff ff ff ff ff
[ 11.792015] usb 1-1: 150: ff ff ff ff ff ff ff ff
[ 11.796725] usb 1-1: 158: ff ff ff ff ff ff ff ff
[ 11.801426] usb 1-1: 160: ff ff ff ff ff ff ff ff
[ 11.806140] usb 1-1: 168: ff ff ff ff ff ff ff ff
[ 11.810839] usb 1-1: 170: ff ff ff ff ff ff ff ff
[ 11.815549] usb 1-1: 178: ff ff ff ff ff ff ff ff
[ 11.820250] usb 1-1: 180: ff ff ff ff ff ff ff ff
[ 11.824967] usb 1-1: 188: ff ff ff ff ff ff ff ff
[ 11.829667] usb 1-1: 190: ff ff ff ff ff ff ff ff
[ 11.834381] usb 1-1: 198: ff ff ff ff ff ff ff ff
[ 11.839081] usb 1-1: 1a0: ff ff ff ff ff ff ff ff
[ 11.843792] usb 1-1: 1a8: ff ff ff ff ff ff ff ff
[ 11.848492] usb 1-1: 1b0: ff ff ff ff ff ff ff ff
[ 11.853203] usb 1-1: 1b8: ff ff ff ff ff ff ff ff
[ 11.857903] usb 1-1: 1c0: ff ff ff ff ff ff ff ff
[ 11.862614] usb 1-1: 1c8: ff ff ff ff ff ff ff ff
[ 11.867313] usb 1-1: 1d0: ff ff ff ff ff ff ff ff
[ 11.872014] usb 1-1: 1d8: ff ff ff ff ff ff ff ff
[ 11.876723] usb 1-1: 1e0: ff ff ff ff ff ff ff ff
[ 11.881423] usb 1-1: 1e8: ff ff ff ff ff ff ff ff
[ 11.886140] usb 1-1: 1f0: ff ff ff ff ff ff ff ff
[ 11.890842] usb 1-1: 1f8: ff ff ff ff ff ff ff ff
[ 11.895558] usb 1-1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 11.903912] usb 1-1: RTL8192EU MAC: 00:0f:00:33:b3:7c
[ 11.908961] usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 11.916373] usb 1-1: Firmware revision 19.0 (signature 0x92e1)
[ 11.927131] do the RAM reset
[ 13.275421] usb 2-1: Vendor: Realtek
[ 13.279022] usb 2-1: Product: 802.11n WLAN Adapter
[ 13.283949] usb 2-1: rtl8192cu_parse_efuse: dumping efuse (0x80 bytes):
[ 13.290609] usb 2-1: 00: 29 81 00 74 cd 00 00 00
[ 13.295290] usb 2-1: 08: ff 00 da 0b 78 81 03 41
[ 13.299917] usb 2-1: 10: 32 00 85 62 9e ad ac a2
[ 13.304601] usb 2-1: 18: 13 5d f8 ab 0a 03 52 65
[ 13.309230] usb 2-1: 20: 61 6c 74 65 6b 00 16 03
[ 13.313867] usb 2-1: 28: 38 30 32 2e 31 31 6e 20
[ 13.318486] usb 2-1: 30: 57 4c 41 4e 20 41 64 61
[ 13.323119] usb 2-1: 38: 70 74 65 72 00 00 00 00
[ 13.327741] usb 2-1: 40: 00 00 00 00 00 00 00 00
[ 13.332359] usb 2-1: 48: 00 00 00 00 00 00 00 00
[ 13.337054] usb 2-1: 50: 00 00 00 00 00 00 00 00
[ 13.341677] usb 2-1: 58: 06 00 25 24 24 25 25 25
[ 13.346328] usb 2-1: 60: 26 26 25 26 26 27 00 00
[ 13.350951] usb 2-1: 68: 00 00 0f 00 00 21 00 00
[ 13.355642] usb 2-1: 70: 00 00 00 00 00 08 00 00
[ 13.360271] usb 2-1: 78: 0e 00 00 00 36 00 91 00
[ 13.364935] usb 2-1: RTL8192CU rev A (TSMC) 2T2R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[ 13.373313] usb 2-1: RTL8192CU MAC: ac:a2:13:5d:f8:ab
[ 13.378393] usb 2-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 13.442811] usb 2-1: Firmware revision 88.2 (signature 0x88c1)
[ 14.084949] usbcore: registered new interface driver rtl8xxxu
[ 14.108579] b53_common: exports duplicate symbol b53_switch_alloc (owned by kernel)
[ 14.173225] kmodloader: 1 module could not be probed
[ 14.178385] kmodloader: - b53_common - 0
[ 22.790914] sun7i-dwmac 1c50000.ethernet eth0: Link is Down
[ 22.808616] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found
[ 22.816108] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled
[ 22.823729] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available
[ 22.831434] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW
[ 22.838105] sun7i-dwmac 1c50000.ethernet eth0: configuring for fixed/rgmii link mode
[ 22.846467] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 22.855058] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.884282] bcm53xx stmmac-0:1e lan2: configuring for phy/gmii link mode
[ 22.892785] 8021q: adding VLAN 0 to HW filter on device lan2
[ 22.894985] bcm53xx stmmac-0:1e lan2: Link is Up - 100Mbps/Full - flow control rx/tx
[ 22.924930] br-lan: port 1(lan2) entered blocking state
[ 22.930259] br-lan: port 1(lan2) entered disabled state
[ 22.941789] device lan2 entered promiscuous mode
[ 22.946562] device eth0 entered promiscuous mode
[ 22.975637] br-lan: port 1(lan2) entered blocking state
[ 22.980930] br-lan: port 1(lan2) entered forwarding state
[ 23.016467] bcm53xx stmmac-0:1e lan3: configuring for phy/gmii link mode
[ 23.028096] 8021q: adding VLAN 0 to HW filter on device lan3
[ 23.059948] br-lan: port 2(lan3) entered blocking state
[ 23.065297] br-lan: port 2(lan3) entered disabled state
[ 23.076577] device lan3 entered promiscuous mode
[ 23.125159] bcm53xx stmmac-0:1e lan4: configuring for phy/gmii link mode
[ 23.133525] 8021q: adding VLAN 0 to HW filter on device lan4
[ 23.164659] br-lan: port 3(lan4) entered blocking state
[ 23.169942] br-lan: port 3(lan4) entered disabled state
[ 23.198919] device lan4 entered promiscuous mode
[ 23.256974] bcm53xx stmmac-0:1e wan: configuring for phy/gmii link mode
[ 23.273039] 8021q: adding VLAN 0 to HW filter on device wan
[ 23.307117] br-lan: port 4(wan) entered blocking state
[ 23.312320] br-lan: port 4(wan) entered disabled state
[ 23.340807] device wan entered promiscuous mode
[ 23.419364] bcm53xx stmmac-0:1e lan1: configuring for phy/gmii link mode
[ 23.433106] 8021q: adding VLAN 0 to HW filter on device lan1
[ 23.852763] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 32.492605] vcc3v0: disabling
[ 32.495622] vcc5v0: disabling
[ 49.933089] bcm53xx stmmac-0:1e lan2: Link is Down
[ 49.938019] br-lan: port 1(lan2) entered disabled state
[ 52.013449] bcm53xx stmmac-0:1e lan2: Link is Up - 100Mbps/Full - flow control rx/tx
[ 52.021285] br-lan: port 1(lan2) entered blocking state
[ 52.026568] br-lan: port 1(lan2) entered forwarding state
[ 62.413097] bcm53xx stmmac-0:1e lan2: Link is Down
[ 62.418034] br-lan: port 1(lan2) entered disabled state
[ 71.773409] bcm53xx stmmac-0:1e lan2: Link is Up - 100Mbps/Full - flow control rx/tx
[ 71.781240] br-lan: port 1(lan2) entered blocking state
[ 71.786513] br-lan: port 1(lan2) entered forwarding state
root@OpenWrt:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option path 'platform/soc/1c1c000.usb/usb2/2-1/2-1:1.0'
option band '2g'
option txpower '20'
option cell_density '3'
option htmode 'HT20'
option channel 'auto'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'psk2'
option key '*************'
config wifi-device 'radio1'
option type 'mac80211'
option path 'platform/soc/1c14000.usb/usb1/1-1/1-1:1.0'
option channel '1'
option band '2g'
option cell_density '0'
option disabled '1'
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'OpenWrt'
option encryption 'psk2'
option key '************'
option disabled '1'
root@OpenWrt:~# cat /etc/config/network
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdbe:c324:cba0::/48'
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
list ports 'wan'
option mtu '1500'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option proto 'dhcp'
option device 'lan1'
config interface 'wan6'
option proto 'dhcpv6'
option device 'lan1'
option reqaddress 'try'
option reqprefix 'auto'
config device
option name 'wan'