Thanks Netmask you saved my Bacon
is my pk_delay normal? I have seen on forum with only few microseconds
tc -s qdisc
qdisc noqueue 0: dev lo root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc mq 0: dev eth0 root
Sent 74927244581 bytes 88946739 pkt (dropped 0, overlimits 0 requeues 48715)
backlog 0b 0p requeues 48715
qdisc fq_codel 0: dev eth0 parent :5 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 4Mb ecn drop_batch 64
Sent 11565470 bytes 70933 pkt (dropped 0, overlimits 0 requeues 418)
backlog 0b 0p requeues 418
maxpacket 21668 drop_overlimit 0 new_flow_count 31 ecn_mark 0
new_flows_len 0 old_flows_len 0
qdisc fq_codel 0: dev eth0 parent :4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 4Mb ecn drop_batch 64
Sent 197363978 bytes 218763 pkt (dropped 0, overlimits 0 requeues 46159)
backlog 0b 0p requeues 46159
maxpacket 16654 drop_overlimit 0 new_flow_count 65 ecn_mark 0
new_flows_len 0 old_flows_len 0
qdisc fq_codel 0: dev eth0 parent :3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 4Mb ecn drop_batch 64
Sent 36731663 bytes 93773 pkt (dropped 0, overlimits 0 requeues 1076)
backlog 0b 0p requeues 1076
maxpacket 19126 drop_overlimit 0 new_flow_count 36 ecn_mark 0
new_flows_len 0 old_flows_len 0
qdisc fq_codel 0: dev eth0 parent :2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 4Mb ecn drop_batch 64
Sent 11497052 bytes 110971 pkt (dropped 0, overlimits 0 requeues 499)
backlog 0b 0p requeues 499
maxpacket 16654 drop_overlimit 0 new_flow_count 38 ecn_mark 0
new_flows_len 0 old_flows_len 0
qdisc fq_codel 0: dev eth0 parent :1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 4Mb ecn drop_batch 64
Sent 74670086418 bytes 88452299 pkt (dropped 0, overlimits 0 requeues 563)
backlog 0b 0p requeues 563
maxpacket 18168 drop_overlimit 0 new_flow_count 109 ecn_mark 0
new_flows_len 0 old_flows_len 0
qdisc noqueue 0: dev dummy0 root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 0: dev eth1 root refcnt 2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 4Mb ecn drop_batch 64
Sent 61811639110 bytes 76646402 pkt (dropped 0, overlimits 0 requeues 5842)
backlog 0b 0p requeues 5842
maxpacket 1512 drop_overlimit 0 new_flow_count 3153 ecn_mark 0
new_flows_len 0 old_flows_len 0
qdisc noqueue 0: dev eth1.20 root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc noqueue 0: dev br-guest root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc noqueue 0: dev br-lan root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc noqueue 0: dev eth1.10 root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc cake 802c: dev pppoe-wan root refcnt 2 bandwidth 18Mbit diffserv4 dual-srchost nat nowash ack-filter split-gso rtt 100ms ptm overhead 60 mpu 64
Sent 6949281796 bytes 8808236 pkt (dropped 64324, overlimits 9787883 requeues 0)
backlog 0b 0p requeues 0
memory used: 1331392b of 4Mb
capacity estimate: 18Mbit
min/max network layer size: 27 / 1490
min/max overhead-adjusted size: 89 / 1575
average network hdr offset: 0
Bulk Best Effort Video Voice
thresh 1125Kbit 18Mbit 9Mbit 4500Kbit
target 16.1ms 5ms 5ms 5ms
interval 111ms 100ms 100ms 100ms
pk_delay 0us 19.7ms 96us 400us
av_delay 0us 3.82ms 1us 42us
sp_delay 0us 125us 1us 5us
backlog 0b 0b 0b 0b
pkts 0 8795942 4 76614
bytes 0 6921457566 304 33038393
way_inds 0 2227695 0 173
way_miss 0 108621 4 14455
way_cols 0 24 0 0
drops 0 638 0 0
marks 0 0 0 0
ack_drop 0 63686 0 0
sp_flows 0 3 1 1
bk_flows 0 1 0 0
un_flows 0 0 0 0
max_len 0 19370 76 1178
quantum 300 549 300 300
qdisc ingress ffff: dev pppoe-wan parent ffff:fff1 ----------------
Sent 7060252981 bytes 9397811 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc cake 802d: dev ifb4pppoe-wan root refcnt 2 bandwidth 35Mbit diffserv4 dual-dsthost nat wash ingress no-ack-filter split-gso rtt 100ms ptm overhead 60
Sent 7012745100 bytes 9364782 pkt (dropped 33029, overlimits 11105595 requeues 0)
backlog 0b 0p requeues 0
memory used: 1842560b of 4Mb
capacity estimate: 35Mbit
min/max network layer size: 28 / 1490
min/max overhead-adjusted size: 90 / 1575
average network hdr offset: 0
Bulk Best Effort Video Voice
thresh 2187Kbit 35Mbit 17500Kbit 8750Kbit
target 8.3ms 5ms 5ms 5ms
interval 103ms 100ms 100ms 100ms
pk_delay 225us 1.87ms 688us 701us
av_delay 18us 365us 71us 113us
sp_delay 4us 3us 2us 22us
backlog 0b 0b 0b 0b
pkts 662550 5621990 2345553 767718
bytes 33998329 4698225357 1281303564 1046725731
way_inds 1 1372995 2706 181
way_miss 915 76004 11587 2433
way_cols 0 0 0 0
drops 0 14876 17916 237
marks 0 0 0 0
ack_drop 0 0 0 0
sp_flows 1 5 1 1
bk_flows 0 1 0 0
un_flows 0 0 0 0
max_len 1278 1490 1490 1470
quantum 300 1068 534 300
I upgraded to
release uptodate: 2.1.7-2 twicedaily[refresh] [backup] [tty]
and DNS HTTPS Proxy is not working. I am getting this error
nslookup google.com
;; communications error to 127.0.0.1#53: timed out
;; communications error to 127.0.0.1#53: timed out
;; communications error to 127.0.0.1#53: timed out
;; communications error to ::1#53: timed out
;; no servers could be reached
I am able to use the internet after stopping dns-https-proxy in luci.
Just installed 2.1.7-2 (OpenWrt 22.03.1)
dns over https working? dns-https-proxy?
Installed 2.1.9-5. Working good as usual.
be an isp or community wifi/fiber network?
Dudes just installed the new openwrt version from the official firmware selector .
My RPi4B gets stuck on these lines while booting.
ipv6 addrconf (netdev_change): vr-lan:link becomes ready
only after pressing enter does it work , any solution to make it go away ?
ok , it fixes it self but takes an extra 15 secs to do so
Ok dudes ,
Now I need help connecting my rtl8812AU adapter to my pi.
I tried installing the driver from luci, after that I ssh'ed into the rpi and wrote ifconfig wlan1 up
.it was just stuck in loading for around 15 mins.|
Then I manually restarted the pi and then tried ifconfig
, stuck again.
hence turned to you guys for help
Please take this as a reminder that this topic is intended for questions specific to this community build only.
For questions regarding official release / snapshot builds, please use the other available forum categories.
Thanks!
Use the tplink ue300. Works flawlessly so far
New snapshot available
Thanks! Updated 3 instances. No issues so far
Great to hear. I'll have to try it out
Does anyone have the link to download ?
The builds are in github. Pls read 1st post of this thread.
Hey guys,
Is this build still stable or safe to use?
Does it work with Argon One v2 fan?
I use https-dns-proxy and SQM.
hi ryan74, rpi-4_22.03.2_2.1.9-5_r19803_extra is considered stable while rpi-4_snapshot_7.1.75-11_r21243_extra is for power user. i use agone one v1 'https://gitlab.com/DarkElvenAngel/argononed/-/blob/master/OS/openwrt/README.md', with htttp-dns-proxy there were some problems 'https://github.com/wulfy23/rpi4/issues/24', while for SQM everything is ok. use 7.1.75-11. check 'https://github.com/wulfy23/rpi4/tree/master/builds/'