bug report:
New installation,unable to boot after Package upgrade,
do not know why?
Model:Raspberry Pi 2 Model B Rev 1.1
Architecture:ARMv7 Processor rev 5 (v7l)
Firmware Version:OpenWrt 19.07.2 r10947-65030d81f3 / LuCI openwrt-19.07 branch git-20.057.55219-13dd17f
Kernel Version:4.14.171
↓Command↓
opkg update
opkg list-upgradable | sed 's/ - .*//' | sed 's/^/opkg -V upgrade /' | sh
↓Reboot↓
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 4.14.171 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10947-65030d81f3)) #0 SMP Thu Feb 27 21:05:12 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 16 MiB at 0x3a400000
[ 0.000000] random: get_random_bytes called from 0x807008cc with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240792
[ 0.000000] Kernel command line: bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 937856K/970752K available (4948K kernel code, 159K rwdata, 728K rodata, 1024K init, 359K bss, 16512K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x805d5064 (5941 kB)
[ 0.000000] .init : 0x80700000 - 0x80800000 (1024 kB)
[ 0.000000] .data : 0x80800000 - 0x80827e00 ( 160 kB)
[ 0.000000] .bss : 0x8082cd20 - 0x80886948 ( 360 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000027] Switching to timer-based delay loop, resolution 52ns
[ 0.000253] Console: colour dummy device 80x30
[ 0.000764] console [tty1] enabled
[ 0.000812] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000857] pid_max: default: 32768 minimum: 301
[ 0.001030] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001067] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001762] CPU: Testing write buffer coherency: ok
[ 0.002259] CPU0: update cpu_capacity 1024
[ 0.002290] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.002755] Setting up static identity map for 0x100000 - 0x100060
[ 0.002928] Hierarchical SRCU implementation.
[ 0.003711] smp: Bringing up secondary CPUs ...
[ 0.004604] CPU1: update cpu_capacity 1024
[ 0.004614] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.005679] CPU2: update cpu_capacity 1024
[ 0.005688] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.006651] CPU3: update cpu_capacity 1024
[ 0.006661] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.006846] smp: Brought up 1 node, 4 CPUs
[ 0.006966] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.006987] CPU: All CPU(s) started in HYP mode.
[ 0.007006] CPU: Virtualization extensions available.
[ 0.017549] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.017881] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017932] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.018880] pinctrl core: initialized pinctrl subsystem
[ 0.020095] NET: Registered protocol family 16
[ 0.022823] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.027293] cpuidle: using governor ladder
[ 0.027354] cpuidle: using governor menu
[ 0.027855] Serial: AMBA PL011 UART driver
[ 0.029680] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.062000] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb817000, dmachans=0x1
[ 0.064293] SCSI subsystem initialized
[ 0.064559] usbcore: registered new interface driver usbfs
[ 0.064638] usbcore: registered new interface driver hub
[ 0.064746] usbcore: registered new device driver usb
[ 0.070146] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36
[ 0.071511] clocksource: Switched to clocksource arch_sys_counter
[ 0.077831] NET: Registered protocol family 2
[ 0.078678] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.078819] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.079024] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.079206] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.079285] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.079563] NET: Registered protocol family 1
[ 0.081050] Crashlog allocated RAM at address 0x3f00000
[ 0.081266] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.086425] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.088595] io scheduler noop registered
[ 0.088632] io scheduler deadline registered
[ 0.088796] io scheduler cfq registered (default)
[ 0.091094] BCM2708FB: allocated DMA memory fa500000
[ 0.091164] BCM2708FB: allocated DMA channel 0 @ bb817000
[ 0.100617] Console: switching to colour frame buffer device 82x26
[ 0.109584] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.115820] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.121964] vc-sm: Videocore shared memory driver
[ 0.134804] brd: module loaded
[ 0.142525] loop: module loaded
[ 0.145576] libphy: Fixed MDIO Bus: probed
[ 0.148275] usbcore: registered new interface driver lan78xx
[ 0.150951] usbcore: registered new interface driver smsc95xx
[ 0.153507] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.183937] dwc_otg 3f980000.usb: base=0xf0980000
[ 0.386651] Core Release: 2.80a
[ 0.389061] Setting default values for core params
[ 0.391509] Finished setting default values for core params
[ 0.594162] Using Buffer DMA mode
[ 0.596501] Periodic Transfer Interrupt Enhancement - disabled
[ 0.598969] Multiprocessor Interrupt Enhancement - disabled
[ 0.601514] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.604039] Dedicated Tx FIFOs mode
[ 0.607060] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xba514000 dma = 0xfa514000 len=9024
[ 0.612318] FIQ FSM acceleration enabled for :
[ 0.612318] Non-periodic Split Transactions
[ 0.612318] Periodic Split Transactions
[ 0.612318] High-Speed Isochronous Endpoints
[ 0.612318] Interrupt/Control Split Transaction hack enabled
[ 0.624540] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80441014
[ 0.627082] WARN::hcd_init_fiq:460: FIQ ASM at 0x80441330 length 36
[ 0.629586] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ 0.632205] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.634775] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.637417] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.640018] Init: Port Power? op_state=1
[ 0.642576] Init: Power Port (0)
[ 0.645312] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.647912] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.650491] usb usb1: Product: DWC OTG Controller
[ 0.653039] usb usb1: Manufacturer: Linux 4.14.171 dwc_otg_hcd
[ 0.655578] usb usb1: SerialNumber: 3f980000.usb
[ 0.658656] hub 1-0:1.0: USB hub found
[ 0.661135] hub 1-0:1.0: 1 port detected
[ 0.664336] usbcore: registered new interface driver uas
[ 0.666764] usbcore: registered new interface driver usb-storage
[ 0.669166] mousedev: PS/2 mouse device common for all mice
[ 0.671553] i2c /dev entries driver
[ 0.674499] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.677274] bcm2835-cpufreq: min=600000 max=900000
[ 0.680183] sdhci: Secure Digital Host Controller Interface driver
[ 0.682756] sdhci: Copyright(c) Pierre Ossman
[ 0.685674] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.688379] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.692334] vchiq: vchiq_init_state: slot_zero = ba580000, is_master = 0
[ 0.695624] [vc_sm_connected_init]: start
[ 0.704185] [vc_sm_connected_init]: end - returning 0
[ 0.707837] NET: Registered protocol family 10
[ 0.711784] Segment Routing with IPv6
[ 0.714418] NET: Registered protocol family 17
[ 0.716971] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.722282] 8021q: 802.1Q VLAN Support v1.8
[ 0.725321] Registering SWP/SWPB emulation handler
[ 0.734761] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.737734] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.881606] Indeed it is in host mode hprt0 = 00021501
[ 0.932125] console [ttyAMA0] enabled
[ 0.933673] sdhost: log_buf @ ba513000 (fa513000)
[ 1.028180] random: fast init done
[ 1.141519] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.221510] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.224795] Indeed it is in host mode hprt0 = 00001101
[ 1.231874] of_cfs_init
[ 1.461761] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.463781] of_cfs_init: OK
[ 1.469512] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.549173] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.553196] hub 1-1:1.0: USB hub found
[ 1.559559] mmc0: new high speed SD card at address 0002
[ 1.560859] hub 1-1:1.0: 5 ports detected
[ 1.565643] mmcblk0: mmc0:0002 00000 975 MiB
[ 1.682526] mmcblk0: p1 p2
[ 1.697439] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 1.708973] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.719054] Freeing unused kernel memory: 1024K
[ 1.842199] init: Console is alive
[ 1.848870] init: - watchdog -
[ 1.891547] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.996008] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.012113] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.026807] init: - preinit -
[ 2.031817] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.040958] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.053268] smsc95xx v1.0.6
[ 2.059198] random: procd: uninitialized urandom read (4 bytes read)
[ 2.145723] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:9b:ba:9e
[ 5.235151] mount_root: mounting /dev/root
[ 5.243034] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[ 5.257720] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.323263] urandom-seed: Seeding with /etc/urandom.seed
[ 5.367497] procd: - early -
[ 5.374352] procd: - watchdog -