RouterBoard RB951G-2HND - no Wi-Fi access point mode

[FinnTurner]

Hi, I have a MikroTik RouterBoard RB951G-2HND running the latest lede reboot image installed via the standard initramfs+sysupgrade method. So far, everything works, except wi-fi access point. Wi-Fi client works, ethernet, USB, OpenVPN even. But wi-fi access point mode does not. It says it does, though. It says Gallifrey.Net is enabled, etc, but the network never shows up on any of my devices. Any suggestions?

[mortenchristensen]

I am afraid, I cannot help you with your issue, but I would like to hear, if your RB951G is rev1/rev2 or rev3 as described here
https://wiki.openwrt.org/toh/mikrotik/rb951g_2hnd.

I have a rev3 and have never had success with tftp boot on a initramfs from LEDE, like covered in this thread

Mikrotik RB951g-2HnD

Anybody knowing if it is possible to install LEDE on RB951g ? As described here https://wiki.openwrt.org/toh/mikrotik/rb951g_2hnd its 5 GigE ports need a special patch, that is not in standard openwrt-builds for Mikrotik. Do you know if there is a LEDE build, that works on RB951g or if it is possible to build a firmware with the needed patch ?

which leaves me on OpenWRT without LEDE's new developments.