I bought my router partly because I wanted to install OpenWRT on it at some point and it is supported by the snapshot build. I'm new to the project so I'm not sure what the release timeframe is. Is there an ETA for when the current snapshot gets a stable build? I tried to find a newbie category and couldn't find one so I apologise about that.
The router is the Asus BT8.
Q1 next year, give or take.
1 Like
The main goal for the next major release is the bump to kernel 6.12. It is only begining for selected targets, more will come and it will take a lot of time and work. Based on experience from previous versions, yes Q1 2006 is a good estimate.
Thank you both very much! I appreciate it.
efahl
May 26, 2025, 8:44pm
5
Re @badulesia 's post:
You can track here, and maybe do testing on your device when it gets added to speed things along...
opened 05:42PM - 02 Oct 24 UTC
### Status of Linux kernel 6.12 migration in main:
**Currently implemented rele… ase: 6.12.30**
- [x] generic:
- approval request: https://github.com/openwrt/openwrt/pull/16547
**Targets:**
- [ ] airoha
- under development: https://github.com/hurrian/openwrt-w1700k
- [ ] apm821xx
- ~under development:~ https://github.com/chunkeey/openwrt/tree/apm821xx-6_12
- approval request for testing: https://github.com/openwrt/openwrt/pull/18798
- [ ] archs38
- approval request for default: https://github.com/openwrt/openwrt/pull/18786
- [ ] armsr
- ~under development:~ https://gitlab.com/traversetech/ls1088firmware/openwrt/-/commits/openwrt-main-sr-6-12
- approval request for testing: https://github.com/openwrt/openwrt/pull/18849
- [ ] at91
- [ ] ath79
- ~approval request for testing:~ https://github.com/openwrt/openwrt/pull/18667
- ✓ as testing: [ath79: enable 6.12 testing kernel](https://github.com/openwrt/openwrt/commit/df465b6513053c5f14cf26063979f4024ff56ac9)
- [x] bcm27xx
- ~approval request for testing:~ https://github.com/openwrt/openwrt/pull/17147
- ~✓ as testing:~ https://github.com/openwrt/openwrt/pull/18736
- ✓ as default: https://github.com/openwrt/openwrt/pull/18868
- [ ] bcm47xx
- [ ] bcm4908
- [ ] bcm53xx
- [ ] bmips
- approval request for testing: https://github.com/openwrt/openwrt/pull/18746
- [x] d1
- ~approval request for testing:~ https://github.com/openwrt/openwrt/pull/18718
- ~✓ as testing: ~[d1: add 6.12 kernel as testing](https://github.com/openwrt/openwrt/commit/b3c76f182157221a15083078eaea0556f4596519)
- ✓ as default: [d1: use kernel 6.12 by default](https://github.com/openwrt/openwrt/commit/f5b3e71cc5e7073b65b3c0b2f7795e15faac1ea4)
- [ ] gemini
- [ ] imx
- [ ] ipq40xx
- approval request for testing: https://github.com/openwrt/openwrt/pull/18725
- [ ] ipq806x
- [ ] ixp4xx
- [ ] kirkwood
- [ ] lantiq
- approval request for testing: https://github.com/openwrt/openwrt/pull/18751
- [ ] layerscape
- [ ] loongarch64
- [ ] malta
- ~under development:~ https://github.com/guidosarducci/openwrt/tree/master-support-malta-6.12
- approval request for testing: https://github.com/openwrt/openwrt/pull/18712
- [ ] mediatek
- ✓ as testing: https://github.com/openwrt/openwrt/pull/18750
- [ ] mpc85xx
- approval request for testing: https://github.com/openwrt/openwrt/pull/18778
- [ ] mvebu
- [x] mxs
- ~approval request for testing:~ https://github.com/openwrt/openwrt/pull/18686
- ~✓ as testing: ~[mxs: add 6.12 kernel as testing](https://github.com/openwrt/openwrt/commit/769e9efd67c69b048cb86fe1ce9039b00fd980e9)
- ✓ as default: [mxs: use kernel 6.12 by default](https://github.com/openwrt/openwrt/commit/3ad65da7d668560675e239b4d181276cc8c2d798)
- [ ] octeon
- approval request for testing: https://github.com/openwrt/openwrt/pull/18652/
- [ ] omap
- approval request for testing: https://github.com/openwrt/openwrt/pull/18735
- [ ] pistachio
- [ ] qoriq
- approval request for testing: https://github.com/openwrt/openwrt/pull/18669
- [x] qualcommax
- ~under development:~ https://github.com/mantas-p/openwrt/commits/mp/qualcommax-612_5/
- ~✓ as testing:~ https://github.com/openwrt/openwrt/pull/18795
- ✓ as default: https://github.com/openwrt/openwrt/pull/18840
- [ ] qualcommbe
- approval request for testing: https://github.com/openwrt/openwrt/pull/18796
- [ ] ramips
- approval request for testing: https://github.com/openwrt/openwrt/pull/18654
- [ ] realtek
- [ ] rockchip
- approval request for testing: https://github.com/openwrt/openwrt/pull/18683
- [ ] sifiveu
- ~approval request for testing:~ https://github.com/openwrt/openwrt/pull/18699
- ✓ as testing: [sifiveu: add 6.12 kernel as testing](https://github.com/openwrt/openwrt/commit/60b5cfdf5a0678c115dd2e8a70368ce2c0f20058)
- [ ] siflower
- [ ] starfive
- [ ] stm32
- approval request for testing: https://github.com/openwrt/openwrt/pull/18740
- [ ] sunxi
- approval request for testing: https://github.com/openwrt/openwrt/pull/18738
- [ ] tegra
- [ ] uml
- approval request for testing: https://github.com/openwrt/openwrt/pull/18666
- [x] x86
- ~✓ as testing:~ https://github.com/openwrt/openwrt/pull/16547
- ✓ as default: https://github.com/openwrt/openwrt/pull/18848
- [ ] zynq
Complete 6 of 45
### Summary:
[kernel 6.12 milestone](https://github.com/openwrt/openwrt/milestone/2)
- generic
-  0 - under development
-  0 - approval request
-  1 - ✓ approved
- targets
-  1 - under development
- 15 - approval request for testing
-  3 - ✓ as testing
-  1 - approval request for default
-  5 - ✓ as default
Total 27 of 45
---
### Additional pending patches related to kernel 6.12:
- ~https://github.com/openwrt/openwrt/pull/18637~
- ~https://github.com/openwrt/openwrt/pull/18701~
- ~https://github.com/openwrt/openwrt/pull/18744~
- ~https://github.com/openwrt/openwrt/pull/18756~
- ~https://github.com/openwrt/openwrt/pull/18768~
- ~https://github.com/openwrt/openwrt/pull/18771~
- https://github.com/openwrt/openwrt/pull/18846
- ~https://github.com/openwrt/openwrt/pull/18847~
- https://github.com/openwrt/openwrt/pull/18925
- https://github.com/openwrt/openwrt/pull/18927
- ~https://github.com/openwrt/packages/pull/26368~
1 Like
I'm monitoring progress of the targets for my devices, and I'm planning to do tests. I have took part in some in the past. I have secondary and spare devices which I can use for testing.
1 Like
ed8
June 2, 2025, 8:45pm
8
I compiled (for the first time) a 6.12 image and flashed it on one of my access points - see Ramips: Add support for 6.12 kernel version - #5 by ed8
Thus far this pre-snapshot build is running well.
2 Likes