Buenas Tardes amigos, tengo un problema con mi Router Linksys WRT160NL; le estaba actualizando el firmware al DD-WRT para usarlo como repetidor y dio un error desde ahi, al conectarlo a la corriente la luz de encendido se que parpadeando y no hace mas nada, uds me puede ayudar a como hacer para revertir y colocarle el firmware original? o Terminar la instalación?
Good afternoon friends, I have a problem with my Linksys WRT160NL Router; I was updating the firmware to the DD-WRT to use it as a repeater and gave an error from there, when plugging the power on the light is blinking and does nothing, you can help me how to revert and put the original firmware? o Finish the installation?
I appreciate your help
We can't help with DD-WRT here, that is not OpenWrt and is supported by the DD-WRT web sites.
Buen dia, gracias por tratar de ayudarme, aun no he podido resolver el problema,
Al conectar el router prende la luz de power intermitente y no para, hago las sugerencias del forum con lo de Telnet al 192.168.1.1 pero no se conecta,
usé el programa "Putty" y el "tftp-3.29" y no hace nada, tampoco responde al ping 192.168.1.1.
Quisiera recuperar el router, si puedes por favor ayudarme con alguna indicación.
Good day, thanks for trying to help me, I have not been able to solve the problem yet,
When connecting the router turns on the intermittent power light and does not stop, I make the forum suggestions with the Telnet to 192.168.1.1 but it does not connect,
I used the program "Putty" and the "tftp-3.29" and does nothing, does not respond to ping 192.168.1.1.
I would like to recover the router, if you can please help me with some indication.