Router cannot got WAN ip with snapshop / NSS build

[sampson]

My both Dynalink WRX-36 is working with a daisychain topology:

2 OWrt24 Routers - switch from direct connect with ISP switch to daisy chained

Try this configuration first: config device option type 'bridge' option name 'br-lan' list ports 'lan1' list ports 'lan2' list ports 'lan3' config device option type 'bridge' option name 'br-wan' list ports 'wan' list ports 'lan4' config interface 'wan' option device 'br-wan' ... If brctl does not show both bridges correctly, you need to switch to bridge VLAN filtering. https://openwrt.org/docs/guide-user/network/dsa/dsa…

I tried to switch R2 from 24.10.1 to Snapshot, then its WAN & WAN6 failed to got IP addresses.

Then I further test with the NSS build, same result.

Qualcommax NSS Build

Hi boys, This version include NSS offload for WiFi After some time without publications we are back I am redo the repos over the latest commit from OpenWRT. Changelog (include upstream of OpenWRT): Updated kernel and NSS software to version 6.6.89. Updated hostapd from “2025-02-09” to “2025-05-08”, if you can support me here: https://github.com/openwrt/openwrt/pull/18426 Updated GCC compiler to version 14.2. Updated to the latest version of NAT46: https://github.com/AgustinL…

Tried upgrade with keep , not keep config, reboot a few times, reset to default a few times. With firmware build from Firmware Selector. All the same.

Do I need to upgrade R1 and R2 both to Snapshot together?

[AgustinLorenzo]

Yeah, is known bug from the latest snapshot.

Can you try this build? https://github.com/AgustinLorenzo/openwrt/releases/tag/ipq807x-nsswifi-2025-05-17-1949

Link: https://github.com/AgustinLorenzo/openwrt/commit/cd950d50195eedc541c3a21acb4a2eabc40b9043

The bug should be fixed.

FYI @Ansuel @robimarko

Regards, Agustin

[sampson]

Thank you very much for your build!

It fixed my router's Wan Interface cannot get IP issue.