Reverting to Stock TPlink firmware gives error

[deanfourie]

Attempting to revert to stock TPlink FW with tplink-safeloader is throwing an error

DEBUG: can not find fwuphdr
Error can not read the partition table (fwup-ptn)

Is there a fix for this?

Thanks

[lleachii]

Related thread/reference:

Cannot use PowerLine feature on TL-WPA8631P v3

openwrt-imagebuilder-22.03.3-ramips-mt7621.Linux-x86_64.tar.xz root@debian:/home/dean# root@debian:/home/dean# tar -xf openwrt-imagebuilder-22.03.3-ramips-mt7621.Linux-x86_64.tar.xz -C /home/dean/openwrt tar (child): xz: Cannot exec: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error is not recoverable: exiting now root@debian:/home/dean#

Cannot use PowerLine feature on TL-WPA8631P v3

@robho had a similar issue with that software in an image builder. Perhaps they could provide some information.

Cannot use PowerLine feature on TL-WPA8631P v3

Yea, how can I change firmware_offset to 0x1050

@psherman @tmomas - can we merge/close, the answer was provided in the original thread.