Hi all, Any way to solve this?
BusyBox v1.19.4 (2014-11-21 11:07:01 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r38031)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
alias: -l not found
root@antMiner:/# umount /overlay
root@antMiner:/# firstboot
jffs2reset: This will erase all settings and remove any installed packages. Are you sure? [N/y]
y
jffs2reset: /dev/mtdblock3 is not mounted, erasing it
root@antMiner:/# reboot
procd: - shutdown -
root@antMiner:/# [ 187.160000] eth1: link down
procd: - reboot -
[ 187.730000] Removing MTD device #3 (rootfs_data) with use count 1
[ 187.750000] Res▒▒A▒U▒▒▒▒
)▒▒B▒▒ L,▒▒1▒j▒▒,'SҰJ*▒#!UI▒▒2▒ɠQ▒▒ ▒鋁b▒B▒▒▒֍a▒T▒S▒▒▒▒H▒▒
ůK▒▒▒▒▒a▒▒V▒▒▒+▒▒▒▒▒5
C▒▒Kլg▒*▒̀▒▒�T▒:▒j ▒l▒▒▒▒nZ▒o
▒▒r▒▒9.▒
▒▒ա▒▒E0▒°▒▒H▒+▒▒N▒ՠ▒▒▒▒8▒▒▒▒▒+▒▒▒▒t▒/▒Ҙ#▒+▒▒8j 5
▒I▒'▒▒n填▒O▒W▒▒n填▒E▒▒▒n▒▒▒▒N▒▒▒▒▒▒Ҕz▒n▒ו٩W
▒:▒▒▒e▒▒▒ ▒▒▒▒]▒LSHh▒Ҡ▒▒&▒▒i▒V▒▒:▒5▒ ѩO▒▒r
u5
:٧
!▒▒▒6▒Nֽ▒+K▒▒▒Hѡ▒'�'▒җ▒2▒ifV▒▒
▒
▒PJ▒I▒'▒I▒▒▒ͥ"▒وe▒+▒▒Y˝▒▒▒
b Y+j
▒]▒K▒ݴkA▒
▒▒▒▒▒ˑs ▒▒s.�t
▒▒o▒a▒▒
▒W
j▒▒ݯW▒ݠ▒+ݥ▒▒A▒▒°▒▒▒▒j▒▒▒k▒m▒▒Vͥ▒:▒rK▒I[▒▒ 鲀▒)ȍ▒*W▒▒ZkkY.▒▒A▒▒▒
▒▒▒I겊3 ▒▒▒³▒ ▒▒Ċ▒▒N▒▒▒▒.▒�▒▒b▒▒▒vY▒n▒▒)▒▒L&B▒@X▒▒▒ٰL B笁▒9▒▒▒▒▒▒▒ծU▒}▒Z+▒▒:
▒nʂ▒ҴL▒MT▒&▒ʍ▒+▒▒▒▒▒0▒½▒▒ݴ▒▒▒▒[▒.+▒]*١
▒+▒▒r0▒�j▒S▒▒▒Uҕ▒Z▒▒▒A▒▒▒▒▒9▒Bj%P▒▒▒▒
▒hY▒k▒A▒N▒ҕv▒*▒
▒▒r▒▒�j▒C▒k▒s▒AU▒▒▒▒▒▒J▒ ▒T墰r0▒*!z
!B'° ▒�J▒ ▒ҵ▒�J5
▒▒▒▒▒▒▒▒]"▒▒e.+▒e¡y.k▒l▒▒▒▒▒▒▒ ▒ ▒0▒▒jA▒[V▒
庂▒▒▒0▒▒▒�▒▒B▒.▒▒eJH▒▒▒▒.▒�▒▒J▒▒▒.▒▒▒k٤▒▒A▒▒
"ų,+▒gJ٩▒▒5▒+▒▒r▒▒�j▒Z▒▒▒r▒▒s▒▒ ▒▒▒▒▒▒]▒▒K▒Ŭ▒▒k+▒▒▒0▒▒▒0▒K▒A▒֙▒▒U▒+▒▒▒0▒jMk▒▒lYҽnY▒▒a.2▒ɠٍ▒▒
Ս▒▒▒▒▒0▒▒▒0▒*▒▒▒^▒▒▒+▒▒K▒▒Xk▒▒C▒+▒▒r0▒�j▒ ▒▒KՀ▒▒'▒▒▒[▒x▒▒▒0▒▒▒0▒▒֙▒▒[▒▒▒r0▒°j▒P▒▒+▒ʹ▒NW▒▒
▒▒ckA▒▒
q▒U
E▒ ▒▒▒1 ▒▒▒sZ▒▒▒▒l▒▒▒▒[▒ r°▒▒▒P▒▒+▒▒"▒▒▒▒▒▒Y▒2▒( ▒▒▒1▒
Ee▒▒▒,▒▒a▒▒▒e▒ b▒▒e.K▒ ▒▒▒▒▒▒▒▒▒▒▒▒0▒▒B▒Z
▒ҽ▒▒+k▒▒J▒▒▒▒.Vɬj▒▒i▒▒▒ V▒▒pZ▒o낀▒KŬ▒▒ݥ▒ʶF▒*▒
▒▒r▒▒▒0▒W:▒▒▒˵▒▒▒▒▒Y'▒
ɑ=▒▒▒I]▒LJu▒▒▒▒ս▒▒▒
▒1▒M&▒▒▒▒▒▒.W▒▒O▒▒▒.Kͬ▒▒Ͳr▒▒▒Z▒▒▒▒ ▒▒▒▒▒▒]▒%▒
▒▒ɬ*ٴNk▒▒▒o▒▒i▒K& ▒²崙▒▒▒[▒▒▒r▒▒�j▒D▒▒▒y▒▒▒h▒�s▒▒▒ɬ*ٴNK▒±N&▒▒.Vɺ▒▒ ▒▒▒ ,ѕ▒J▒[▒▒▒ ▒�▒▒J▒▒▒)ţ▒▒h▒.
▒▒ɬ*ٴNK횢▒N▒▒.Vɺ▒▒ ▒S▒4▒,*▒▒ݩ.Wɽ▒0▒�j▒+▒▒r▒0▒▒▒]▒jV▒▒X▒
▒▒▒▒.Wɽ▒�▒▒j
▒▒▒▒.▒�▒▒j▒▒n▒ ▒̦▒S▒5M&s
▒▒ũ+▒ѥ²L▒k▒-▒▒▒
▒▒▒Y ▒▒▒▒▒Y▒▒▒դ ▒¸-"ŴX ▒▒▒
ʹŴ ▒▒hZ▒+▒C▒
▒▒▒▒0▒WZ▒ը▒H▒X▒▒▒O&& z▒d▒▒▒▒▒ j▒▒O▒▒▒t.�AU▒▒b▒▒▒▒흌▒[▒▒▒r▒0▒▒▒]▒J▒▒T*GS*▒
▒▒r▒▒�j▒C▒++Ʌ▒Z▒dY+▒ ▒▒.邲▒r▒▒▒▒▒▒
5▒(▒▒▒&▒S´▒▒[▒▒r▒8▒▒▒]▒▒duŸ'"զؗ▒▒ ▒▒▒�▒륵u['▒0LH▒▒▒▒.▒�▒▒j▒▒▒i▒㫁h▒.
▒▒ɬ*ٴNk▒▒&▒[▒▒▒r0N�j▒N▒▒R▒gZ.▒▒▒▒ɽ▒k▒▒▒▒▒▒^▒6▒▒▒▒ ▒)▒0▒▒j▒R▒i▒[▒▒▒K▒▒.▒A5LRjT▒z▒72▒ ▒*▒
▒▒▒▒0▒W*▒▒2i▒T▒▒▒▒FƧ▒5▒+▒▒▒▒L▒▒▒▒M▒(▒▒▒▒Ҋ▒:▒'m▒捡+▒▒▒▒M▒▒▒b▒K▒c▒▒▒ՠ.+ɠ▒▒▒▒a▒*
▒▒▒▒W▒ݩw▒▒▒▒,▒▒▒▒+▒▒Yj▒▒j▒[▒▒r▒7▒▒▒]▒▒Qi▒*֥▒ɕ▒ɽt+▒▒ ▒▒l^ҍ▒+▒▒▒▒͂▒▒T▒▒▒▒X,++▒Bų
▒Ţ▒▒e▒▒▒ճ'▒▒▒B▒.Vɺ▒▒▒▒▒▒e▒▒▒[▒▒▒r5▒�j▒T▒ŮBų
▒Ţ▒▒e▒▒▒ճ▒ʲB▒.Vɺjʌ▒▒▒▒t▒▒▒
▒▒B▒▒袅▒▒▒.▒▒٦▒▒▒B▒▒tX,+k▒▒ʑ&▒▒▒ʒ▒▒[▒▒▒r5N�j▒T▒▒ҕn
ҕgZ.▒▒▒▒C▒
▒▒▒N▒0▒WJ▒▒B▒▒袅▒▒Y▒▒▒.+ͺ▒ʖ¯.▒ɺ▒,▒�▒▒e.▒▒
▒▒▒▒0▒WJ▒▒K▒▒▒B▒▒袅▒▒Y▒▒▒.+ͺ▒ʖ¯.▒ɺ▒,▒�▒▒e.▒▒+▒▒▒L▒▒▒Wr▒▒'R▒▒▒.Wդ▒▒ݴk▒ѠV▒Ŭ▒*▒▒▒▒▒▒6▒▒▒0ݚ▒▒▒.Kͺ▒▒▒▒Z▒▒ ▒▒&▒ʏ▒▒fJ▒▒+▒▒▒LKݨ.H▒▒▒▒▒6▒▒▒0▒R▒▒▒v宥▒2▒▒▒▒J▒▒▒▒▒▒J▒▒▒
▒▒IE▒EJ▒▒▒J▒▒%%▒▒▒c▒▒▒0▒K&▒▒▒▒▒▒*▒1▒Rk9▒Ể▒▒.▒�▒▒j▒▒▒+
�▒L▒٠N▒A▒
▒ʹ▒▒▒▒M▒▒▒WJ▒▒դ]kɠ▒▒▒n▒▒▒▒▒▒C▒
▒▒▒M▒0▒W▒▒▒]+ɠ▒▒▒▒Z+▒YVk▒ղY¤YVլ7▒
▒�▒ղ▒▒i▒▒▒z▒6▒M▒d▒ZWɬ▒▒p▒.▒1▒R▒▒▒n▒ݠV+Ţ▒▒5▒+▒▒r6�j▒a▒▒▒▒5uX.W▒▒▒ ▒ ▒▒▒
▒▒j▒▒
▒▒▒8▒°▒▒)KŠO▒1▒J▒▒
I▒33X UART
[ 0.670000] console [ttyATH0] enabled, bootconsole disabled
[ 0.670000] console [ttyATH0] enabled, bootconsole disabled
[ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.690000] m25p80 spi0.0: found gd25q64, expected m25p80
[ 0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes)
[ 0.700000] 5 tp-link partitions found on MTD device spi0.0
[ 0.700000] Creating 5 MTD partitions on "spi0.0":
[ 0.710000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.710000] 0x000000020000-0x000000117dd4 : "kernel"
[ 0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.730000] 0x000000117dd4-0x0000007f0000 : "rootfs"
[ 0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.750000] mtd: partition "rootfs" set to be root filesystem
[ 0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000
[ 0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data"
[ 0.770000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.770000] 0x0000007f0000-0x000000800000 : "art"
[ 0.790000] libphy: ag71xx_mdio: probed
[ 0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 1.350000] eth0: Found an AR7240/AR9330 built-in switch
[ 2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 2.950000] TCP: cubic registered
[ 2.950000] NET: Registered protocol family 17
[ 2.960000] 8021q: 802.1Q VLAN Support v1.8
PuTTY[ 2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000)
procd: Console is alive
procd: - watchdog -
[ 5.740000] usbcore: registered new interface driver usbfs
[ 5.740000] usbcore: registered new interface driver hub
[ 5.750000] usbcore: registered new device driver usb
[ 5.750000] usbcore: registered new interface driver bitmain
[ 5.760000] hash ok
[ 5.760000] hashtest OK
[ 5.760000] bitmain-asic: success to register device
[ 5.770000] usbcore: registered new interface driver bitmainbl
[ 5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.790000] ehci-platform: EHCI generic platform driver
[ 5.790000] ehci-platform ehci-platform: EHCI Host Controller
[ 5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 5.830000] hub 1-0:1.0: USB hub found
[ 5.830000] hub 1-0:1.0: 1 port detected
kmod: ran 24 iterations
procd: - preinit -
[ 6.180000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 6.330000] hub 1-1:1.0: USB hub found
[ 6.330000] hub 1-1:1.0: 2 ports detected
[ 6.620000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[ 6.750000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 6.760000] PIC microchip usb OK
Press the [f] key and hit [enter] to enter failsafe mode
mount_root: No jffs2 marker was found
procd: - early -
procd: - watchdog -
procd: - init -
Please press Enter to activate this console.
[ 12.950000] hidraw: raw HID events driver (C) Jiri Kosina
[ 12.960000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[ 12.960000] Backport generated by backports.git backports-20130617-4-ge3220f5
[ 12.980000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
[ 13.000000] usbcore: registered new interface driver usbhid
[ 13.010000] usbhid: USB HID core driver
[ 13.010000] usbcore: registered new interface driver usbserial
[ 13.020000] usbcore: registered new interface driver usbserial_generic
[ 13.030000] usbserial: USB Serial support registered for generic
[ 13.060000] xt_time: kernel timezone is -0000
[ 13.080000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.080000] cfg80211: World regulatory domain updated:
[ 13.090000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.100000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.100000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.110000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.120000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.130000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.140000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.300000] cfg80211: Calling CRDA for country: US
[ 13.300000] cfg80211: Regulatory domain changed to country: US
[ 13.310000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.320000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 13.320000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 13.330000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.340000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.350000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.360000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 13.360000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 19.960000] device eth0 entered promiscuous mode
[ 23.420000] eth1: link up (100Mbps/Full duplex)
[ 24.790000] usb 1-1.1: USB disconnect, device number 3
[ 24.790000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 25.070000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
[ 25.220000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0
[ 25.220000] PIC microchip bootloader usb OK
[ 34.710000] no int in filled
Dec 2 11:28:37 sysinit: Pic haved erase app flash
Dec 2 11:28:37 sysinit: .........................................................................................line: 90 flash flash read error -1
Dec 2 11:28:37 sysinit: 90pre_buf: 020000041d00dd buf_len{13}
Dec 2 11:28:37 sysinit: .................................................................................................................................................................................................................line: 299 flash flash read error -1
Dec 2 11:28:37 sysinit: 299pre_buf: 1098b0001300422400004290251062003800c2af1d buf_len{28}
Dec 2 11:28:37 sysinit: ...............................................................................................................................................................................................................................................................................................................................................................................................................................................line: 730 flash flash read error -1
Dec 2 11:28:37 sysinit: 730pre_buf: 10b3a000242082001400c28f26108200211862001f buf_len{28}
Dec 2 11:28:37 sysinit: ...................................................................................................................................................................................................................................................................................................................................................................................................................................................line: 1165 flash flash read error -1
Dec 2 11:28:37 sysinit: 1165pre_buf: 10ced0000c00c28fc2122200261862000c00c28f02 buf_len{27}
Dec 2 11:28:37 sysinit: .........................................................................................................................................................................................................................................................................................................................................................................................................................................................line: 1606 flash flash read error -1
Dec 2 11:28:37 sysinit: 1606pre_buf: 10ea600006000324231862001000c28fc0014290e8 buf_len{29}
Dec 2 11:28:37 sysinit: .......................................................................................................................................................................................................................line: 1821 flash flash read error -1
Dec 2 11:28:37 sysinit: 1821pre_buf: 10f7d000feff442400a0023c800205240228c570dc buf_len{27}
Dec 2 11:28:37 sysinit: ..............................................................................................................................................................................................................................line: 2043 flash flash read error -1
Dec 2 11:28:37 sysinit: 2043pre_buf: 1005a000212800000e70400f00000000010004240c buf_len{29}
Dec 2 11:28:37 sysinit: ...........................................................................................................................................................................................................................line: 2262 flash flash read error -1
Dec 2 11:28:37 sysinit: 2262pre_buf: 101350006401a68c300005240228c57021104500c8 buf_len{29}
Dec 2 11:28:37 sysinit: ................................................................................................................................................................................................................line: 2470 flash flash read error -1
Dec 2 11:28:37 sysinit: 2470pre_buf: 10205000000042940100452400a0023ca000062498 buf_len{28}
Dec 2 11:28:48 sysinit: 4223pre_buf: 108de000ae5f400f000000001c8082931d8082a3b4 buf_len{27}
Dec 2 11:28:48 sysinit: .................................................................................................................................................................................................................................line: 4448 flash flash read error -1
Dec 2 11:28:48 sysinit: 4448pre_buf: 109bf000e2ff40140000000021e8c0031c00bf8ffa buf_len{27}
Dec 2 11:28:48 sysinit: ................................................................................................................................................................................................................................line: 4672 flash flash read error -1
Dec 2 11:28:48 sysinit: 4672pre_buf: 10a9[ 61.110000] jffs2: notice: (945) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
cc001a000000b01088bf180000001a00000028 buf_len{28}
Dec 2 11:28:48 sysinit: ................................................................................................................................................................................................................................line: 4896 flash flash read error -1
Dec 2 11:28:48 sysinit: 4896pre_buf: 10b7cc00303030303030303030303030303030306d buf_len{27}
Dec 2 11:28:48 sysinit: .....................................................................................................................................................................................................................................line: 5125 flash flash read error -1
Dec 2 11:28:48 sysinit: 5125pre_buf: 020000041d01dc buf_len{14}
Dec 2 11:28:48 sysinit: .........................................................................................Control bootloader to app
[ 62.390000] usb 1-1.1: USB disconnect, device number 4
[ 62.410000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[ 62.660000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform
[ 62.800000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[ 62.810000] PIC microchip usb OK
[ 66.120000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
procd: - init complete -
I reset but the antminer is not working.
(Note for the mods: If this post is dont allowed in this forums please remove or lock this post, thanks.)
Thanks to all.
All the best.