Request Netgear MBRN3000

I don´t know if this is welcome to request a old device ?
Does anyone have any interest with me to try to get Lede on the device ?
The router is almost identical to Netgear DGN2200 v1 which is Lede supported.

I did Pictures from the Mainboard and also got the telnet enabled to the Busybox.

dmesg in the Busybox

Summary

/bin # dmesg
Linux version 2.6.21.5 (caelia@localhost.localdomain) (gcc version 4.2.3) #1
Aug 17 15:53:31 CST 2012
Parallel flash device: name AM29DL800B, id 0x22cb, size 8192KB
96358VW prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 31 pages used for memmap
Normal zone: 3969 pages, LIFO batch:0
Built 1 zonelists. Total pages: 8033
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (33 instructions).
Synthesized TLB store handler fastpath (33 instructions).
Synthesized TLB modify handler fastpath (32 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29228k/32384k available (2127k kernel code, 3156k reserved, 464k dat
6k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80300000 ... 0x80400000>
Calibrating delay loop... 296.96 BogoMIPS (lpj=148480)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Total Flash size: 8192K with 135 sectors
File system address: 0xbe010100
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
BLOG v1.0 Initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
fuse init (API version 7.8)
io scheduler noop registered (default)
PPP generic driver version 2.4.2
NET: Registered protocol family 24
physmap platform flash device: 00800000 at be000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 12 MTD partitions on "physmap-flash.0":
0x00010100-0x00770000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force re
nly
0x00010000-0x00770000 : "fw_upgrade"
0x00770000-0x00780000 : "ML3"
0x00780000-0x00790000 : "ML4"
0x00790000-0x007a0000 : "ML1"
0x007a0000-0x007b0000 : "ML2"
0x007b0000-0x007c0000 : "T_Meter1"
0x007c0000-0x007d0000 : "T_Meter2"
0x007d0000-0x007e0000 : "POT"
0x007e0000-0x007f0000 : "board_data"
0x007f0000-0x00800000 : "nvram"
0x00000000-0x00800000 : "whole_flash"
PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ehci_hcd 0000:00:0a.0: EHCI Host Controller
ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0a.0: irq 18, io mem 0xfffe1300
ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
hub 1-0:1.0: over-current change on port 2
PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:09.0 to 64
ohci_hcd 0000:00:09.0: OHCI Host Controller
ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:09.0: irq 13, io mem 0xfffe1400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver mbm
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
brcmboard: brcm_board_init entry
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
bcmxtmrt: Broadcom BCM6358A1 ATM Network Device v0.1 Aug 17 2012 15:52:23
netem: version 1.2
u32 classifier
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com
All bugs added by David S. Miller davem@redhat.com
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 96k freed
bcmxtmcfg: module license 'Proprietary' taints kernel.
bcmxtmcfg: bcmxtmcfg_init entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6358A1 Ethernet Network Device v0.3 Aug 17 2012 15:52:16
Config Ethernet Switch Through MDIO Pseudo PHY Interface
ethsw: found bcm5325e!
dgasp: kerSysRegisterDyingGaspHandler: eth0 registered
eth0: MAC Address: xx:xx:xx:xx:xx:xx
eth0 Link UP.
KLOB extended to 2 pools
PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:00:01.0 to 64
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: MAC addr from system pool. id:0x776c0000
wl0: MAC Address: xx:xx:xx:xx:xx:xx
wl0: Broadcom BCMa8d6 802.11 Wireless Controller 5.10.120.0.cpe4.402.4
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra US
dem
usbcore: registered new interface driver sierra
drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.
hso: drivers/usb/serial/hso.c: 1.2 Option Wireless
hso: Registering procfs
usbcore: registered new interface driver hso
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem
port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB
ems and ISDN adapters
usbcore: registered new interface driver kalmia
usbcore: registered new interface driver asix
device wl0 entered promiscuous mode
device eth0 entered promiscuous mode
br0: port 2(eth0) entering learning state
br0: topology change detected, propagating
br0: port 2(eth0) entering forwarding state
KLOB extended to 3 pools
kerSysDeregisterDyingGaspHandler: dsl0 is deregistering
kerSysDeregisterDyingGaspHandler: dsl0 not (de)registered
/bin #

Sysinfo

Summary

/bin # sysinfo
Number of processes: 40
12:02am up 3 min,
load average: 1 min:0.06, 5 min:0.05, 15 min:0.01
total used free shared buffers
Mem: 29324 17456 11868 0 1720
Swap: 0 0 0
Total: 29324 17456 11868
/bin #

cpuinfo

Summary

/proc # cat cpuinfo
system type : 96358VW
processor : 0
cpu model : BCM6358 V1.0
BogoMIPS : 296.96
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
ASEs implemented :
VCED exceptions : not available
VCEI exceptions : not available
unaligned exceptions : 8204

Greetings