[Request] DIR-505 Programmer Flashable

I messed up my DIR-505 U-Boot but I do have full partition backup.
If someone can make the backup to programmer flashable file I may succeed in reviving the router.

I suppose you can flash mtd0 file that you have then use bootloader for the recovery.

1 Like

Can I directly flash mtd0 with programmer?
Currently the router is virtually dead.
Green LED lit up for half a second

Yes you can use this file directly.

Thank you very much.
I manage to revive the router and flashed the following partition.
mtd1 art
mtd2 mac
mtd3 nvram
mtd4 language
mtd5 firmware
What else do I need to flash?

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.05.07 12:00:16 =~=~=~=~=~=~=~=~=~=~=~=
login as: root

BusyBox v1.36.1 (2024-05-01 13:46:52 UTC) built-in shell (ash)

e]0;root@OpenWrt: ~ root@OpenWrt:~# insmod mtd-rw.ko i_want_a_brick=1
e]0;root@OpenWrt: ~ root@OpenWrt:~# mtd -r write /tmp/art.mtd1.bin art
Unlocking art ...

Writing from /tmp/art.mtd1.bin to art ...
Rebooting ...

e]0;root@OpenWrt: ~ root@OpenWrt:~# mtd -r write /tmp/mac.mtd2.bin mac
Unlocking mac ...

Writing from /tmp/mac.mtd2.bin to mac ...
Rebooting ...

e]0;root@OpenWrt: ~ root@OpenWrt:~# mtd -r write /tmp/nvram.mtd3.bin nvram
Unlocking nvram ...

Writing from /tmp/nvram.mtd3.bin to nvram ...
Rebooting ...

e]0;root@OpenWrt: ~ root@OpenWrt:~# mtd -r write /tmp/language.mtd4.bin language
Unlocking language ...

Writing from /tmp/language.mtd4.bin to language ...
Rebooting ...

e]0;root@OpenWrt: ~ root@OpenWrt:~# mtd -r write /tmp/firmware.mtd5.bin firmware
Unlocking firmware ...

Writing from /tmp/firmware.mtd5.bin to firmware ...
Rebooting ...

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.