Relay Bridge Destination Host Unreachable

Installing and Using OpenWrt Network and Wireless Configuration
1

I hope someone can please help with this. I have a relay bridge client router connecting three devices and this works great. However when there is a network drop the client becomes unreachable from the host network:

Pinging 192.168.1.2 with 32 bytes of data:
Reply from 192.168.1.2: bytes=32 time=1ms TTL=64
Reply from 192.168.1.2: bytes=32 time=2ms TTL=64
Reply from 192.168.1.2: bytes=32 time=2ms TTL=64

(After wireless interuption)...
Reply from 192.168.1.66: Destination host unreachable.
Reply from 192.168.1.66: Destination host unreachable.
Reply from 192.168.1.66: Destination host unreachable.

Everything on the client side continues to work perfectly normal but from the host side the client becomes unreachable. I've tried to set watchcat rules but there are no conditions to do this on the client because everything is working normaly.

Any ideas?

2

It seems the client needs to re-broadcast itself? This doesn't seem normal.

3

Ok I've worked out something. After a forced disconnection from the host ap to the bridged client ap, If I disable the wireless adapter on my device and re-enable it the client becomes visible again and will reply to ping and I can access Luci. This scenario is not a real problem. But it's still odd!