Still pursuing the installation of this radio, due to higher power capabilities.
I have loaded the ath9k driver, and it is recognizing a radio 'chipset', but it is the wrong chipset.
It is reading an AR9300, but the radio (sourced from two different vendors) is an AR9580-based chipset, the aforementioned R11E-5HnD.
Does the driver match the chipset with the vendor/sub-vendor PCI values? Possible to force the driver to use the AR9580 settings?
Thanks,
--Joe.
02:09.0 Class 0604: 12d8:8619 pcieport
00:1f.3 Class 0403: 8086:a170
00:00.0 Class 0600: 8086:191f skl_uncore
0c:05.0 Class 0604: 12d8:8619 pcieport
06:00.0 Class 0280: 168c:003c ath10k_pci
11:00.0 Class 0280: 168c:0033 ath9k
0c:0d.0 Class 0604: 12d8:8619 pcieport
00:01.1 Class 0604: 8086:1905 pcieport
0b:00.1 Class 0880: 12d8:8619
02:05.0 Class 0604: 12d8:8619 pcieport
05:00.0 Class 0280: 168c:003c ath10k_pci
0c:01.0 Class 0604: 12d8:8619 pcieport
02:0d.0 Class 0604: 12d8:8619 pcieport
01:00.1 Class 0880: 12d8:8619
00:14.2 Class 1180: 8086:a131 intel_pch_thermal
00:1f.6 Class 0200: 8086:15b7 e1000e
04:00.0 Class 0280: 168c:003c ath10k_pci
02:01.0 Class 0604: 12d8:8619 pcieport
0d:00.0 Class 0280: 168c:003c ath10k_pci
00:02.0 Class 0300: 8086:1912 i915
0c:07.0 Class 0604: 12d8:8619 pcieport
00:14.0 Class 0c03: 8086:a12f xhci_hcd
00:1f.4 Class 0c05: 8086:a123
[ 20.013126] ieee80211 phy7: Atheros AR9300 Rev:4 mem=0xffffc900003a0000, irq=18
11:00.0 Class 0280: 168c:0033 ath9k