# \[Quick Guide\] IPv6 setup behind ISP router

**URL:** <https://forum.openwrt.org/t/quick-guide-ipv6-setup-behind-isp-router/208804>\
**Category:** Network and Wireless Configuration\
**Created:** [August 27, 2024, 11:49am UTC](https://forum.openwrt.org/t/quick-guide-ipv6-setup-behind-isp-router/208804 "2024-08-27T11:49:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![panos](https://forum.openwrt.org/letter_avatar/panos/32/6_449c533f586939b6e5f246632a46421f.png) [@panos](https://forum.openwrt.org/u/panos)\
**Post date:** [August 27, 2024, 11:49am UTC](https://forum.openwrt.org/t/quick-guide-ipv6-setup-behind-isp-router/208804/1 "2024-08-27T11:49:22Z")

</div>

Hi all!

I had fun trying to figure out why IPv6 wasn't working, and didn't have much luck finding a solution in one place, so I thought of sharing my findings.

So the network setup is [ISP Router]---DHCP---[Openwrt BPI-R4]  
For reference the ISP Router is the Salt Fibre Box X6 (Swiss Provider) but it should work for all similar XPON routers with CGNAT providers (which makes IPv6 a necessity).

So here we go:  
Interfaces \> **lan** \> DHCP Server \> IPv6 Settings

 ![image](https://forum.openwrt.org/uploads/default/original/3X/4/9/49470c311b153e633ec0b69e433ff614d06ef7cc.png)

Interfaces \> **wan6** \> DHCP Server \> General Setup

Enable DHCP server but click on ignore this interface - we only need the IPv6 settings.

Interfaces \> **wan6** \> DHCP Server \> IPv6 Settings

The picture should look the same as with the lan, BUT also tick the "Designated Master" at the very top. (I will add a screenshot once I'm not a new member and are allowed too 😃 )

After you apply all changes and refresh your DHCP clients you should get IPv6 prefixes directly from the ISP Router. In my case SLAAC is working only.

I hope that helps someone in the same situation!

---

<div class="post-metadata">

**Author:** ![lwinstan](https://forum.openwrt.org/letter_avatar/lwinstan/32/6_449c533f586939b6e5f246632a46421f.png) [@lwinstan](https://forum.openwrt.org/u/lwinstan)\
**Post date:** [February 22, 2025, 6:32am UTC](https://forum.openwrt.org/t/quick-guide-ipv6-setup-behind-isp-router/208804/2 "2025-02-22T06:32:20Z")

</div>

I signed up specifically to give my sincerest thanks to you for your post!

I have spent several hours trying to work out what is going on, realised my traceroutes were returning ipv6, did a google, found your post huzzah!

I can't say thank you enough!

---

<div class="post-metadata">

**Author:** ![citakis](https://forum.openwrt.org/letter_avatar/citakis/32/6_449c533f586939b6e5f246632a46421f.png) [@citakis](https://forum.openwrt.org/u/citakis)\
**Post date:** [March 12, 2025, 8:49pm UTC](https://forum.openwrt.org/t/quick-guide-ipv6-setup-behind-isp-router/208804/3 "2025-03-12T20:49:39Z")

</div>

That was really helpful. Thank you!

---

<div class="post-metadata">

**Author:** ![slh](https://forum.openwrt.org/user_avatar/forum.openwrt.org/slh/32/113591_2.png) [@slh](https://forum.openwrt.org/u/slh)\
**Post date:** [November 20, 2025, 12:27pm UTC](https://forum.openwrt.org/t/quick-guide-ipv6-setup-behind-isp-router/208804/6 "2025-11-20T12:27:57Z")

</div>

Closed on November 20, 2025, 12:27pm UTC


