Queuing issue after snapshot update (ipq40xx + ath79)

[anon54515283]

Just a wild guess. So caution!

I came across this thread: IPQ40xx Switch Config "Strangeness" (swconfig) recently.

Because my first unfounded thought/impression was, as I saw those pings, something is looping within your network. And I wonder if this could be related to the VLAN quirks. There is still WIP about this VLAN issues.

IPQ40xx Switch Config "Strangeness" (swconfig)

Are you sure that's the case? I believe all ipq40xx boards reported two interfaces due to how the driver is written. They have hardcoded VLANs for each interface which is what causes the "strangeness". With DSA you are going to see one interface and multiple ports. Also no more hardcoded VLANs. I suggest you open an issue in GitHub and get it converted, it should be rather easy!

@yogo1212

There are five SSIDs each with an airtime weight of 100.

Out of own experience. If you set this value explicit within your configuration this can cause wired issues with different devices. So better do not mess with this value.