hello
i want to ask about the capabailities of vdsl_cpe_control in supported modems...
i found these on openwrt forum but i dont understand what each does and dont have hardware to test on.
> root@openwrt:~# /sbin/vdsl_cpe_control --help
> DSL_CPE: Welcome to DSL CPI API control application
> DSL_CPE: usage: [options]
> DSL_CPE: following options are available:
> DSL_CPE: --help (-h) - help screen
> DSL_CPE: --version (-v) - display version
> DSL_CPE: --init (-i) - init device w/ <xtu> Bits seperated by underscore (e.g. -i05_01_04_00_04_01_00_00)
> DSL_CPE: --low_cfg (-l) - low level configuration file
> DSL_CPE: --console (-c) - start console
> DSL_CPE: --event_cnf (-e) - configure instance activation handling <enable/disable>[_mask] (e.g. -e1_1)
> DSL_CPE: --msg_dump (-m) - enable message dump
> DSL_CPE: --auto_scr_1 (-a) - autoboot start script for ADSL (empty by default)
> DSL_CPE: --auto_scr_2 (-A) - autoboot start script for VDSL (empty by default)
> DSL_CPE: --firmware1 (-f) - firmware file, default /opt/ifx/firmware/xcpe_hw.bin
> DSL_CPE: --notif (-n) - notification script name, default ./xdslrc.sh
> DSL_CPE: --tcpmsg (-t) - enable dbgtool, listen only on <ipaddr> (optional, e.g. -t0.0.0.0)
> DSL_CPE: --multimode (-M) - set multimode config -M<NextMode>[_<AdslSubPref>] (e.g. -M1_1 or -M1)
> DSL_CPE: --tc-layer (-T) - set TC-Layer options -T<TcLayer>_<TcConfigUs>_<TcConfigDs> (e.g. -T2_0x3_0x1)
> DSL_CPE: --sequence (-S) - set activation sequence -S<Sequence>_<Mode> (e.g. -M0_0)
> DSL_CPE: --debug_drv (-g) -
> DSL_CPE: --debug_app (-G) -
> root@openwrt:~# /sbin/vdsl_cpe_control --console
> DSL_CPE#>help
> acog, AutobootConfigOptionGet
> acos, AutobootConfigOptionSet
> acs, AutobootControlSet
> alf, AutobootLoadFirmware
> asecg, AutobootScriptExecuteConfigGet
> asecs, AutobootScriptExecuteConfigSet
> asg, AutobootStatusGet
> aufg, AutobootUsedFirmwareGet
> alig, AuxLineInventoryGet
> bbsg, BandBorderStatusGet
> bpstg, BandPlanSTatusGet
> bpsg, BandPlanSupportGet
> dbgmlg, DBG_ModuleLevelGet
> dbgmls, DBG_ModuleLevelSet
> dmms, DeviceMessageModifySend
> dms, DeviceMessageSend
> esmcg, EventStatusMaskConfigGet
> esmcs, EventStatusMaskConfigSet
> fddg, FilterDetectionDataGet
> fpsg, FramingParameterStatusGet
> g997amdpfcg, G997_AlarmMaskDataPathFailuresConfigGet
> g997amdpfcs, G997_AlarmMaskDataPathFailuresConfigSet
> g997amlfcg, G997_AlarmMaskLineFailuresConfigGet
> g997amlfcs, G997_AlarmMaskLineFailuresConfigSet
> g997bang, G997_BitAllocationNscGet
> g997bansg, G997_BitAllocationNscShortGet
> g997cdrtcg, G997_ChannelDataRateThresholdConfigGet
> g997cdrtcs, G997_ChannelDataRateThresholdConfigSet
> g997csg, G997_ChannelStatusGet
> g997dpfsg, G997_DataPathFailuresStatusGet
> g997dfr, G997_DeltFreeResources
> g997dhling, G997_DeltHLINGet
> g997dhlinsg, G997_DeltHLINScaleGet
> g997dhlogg, G997_DeltHLOGGet
> g997dqlng, G997_DeltQLNGet
> g997dsnrg, G997_DeltSNRGet
> g997fpsg, G997_FramingParameterStatusGet
> g997gang, G997_GainAllocationNscGet
> g997gansg, G997_GainAllocationNscShortGet
> g997lstg, G997_LastStateTransmittedGet
> g997lacg, G997_LineActivateConfigGet
> g997lacs, G997_LineActivateConfigSet
> g997lfsg, G997_LineFailureStatusGet
> g997lisg, G997_LineInitStatusGet
> g997lig, G997_LineInventoryGet
> g997listrg, G997_LineInventorySTRingGet
> g997lis, G997_LineInventorySet
> g997lsg, G997_LineStatusGet
> g997lspbg, G997_LineStatusPerBandGet
> g997ltsg, G997_LineTransmissionStatusGet
> g997pmsft, G997_PowerManagementStateForcedTrigger
> g997pmsg, G997_PowerManagementStatusGet
> g997racg, G997_RateAdaptationConfigGet
> g997racs, G997_RateAdaptationConfigSet
> g997smr, G997_SnmpMessageReceive
> g997sms, G997_SnmpMessageSend
> g997sang, G997_SnrAllocationNscGet
> g997sansg, G997_SnrAllocationNscShortGet
> g997xtusecg, G997_XTUSystemEnablingConfigGet
> g997xtusecs, G997_XTUSystemEnablingConfigSet
> g997xtusesg, G997_XTUSystemEnablingStatusGet
> help, Help
> hsdg, HybridSelectionDataGet
> ics, InstanceControlSet
> isg, InstanceStatusGet
> lecg, LastExceptionCodesGet
> lfcg, LineFeatureConfigGet
> lfcs, LineFeatureConfigSet
> lfsg, LineFeatureStatusGet
> locg, LineOptionsConfigGet
> locs, LineOptionsConfigSet
> lsg, LineStateGet
> llsg, LoopLengthStatusGet
> llcg, LowLevelConfigurationGet
> llcs, LowLevelConfigurationSet
> mlsg, MiscLineStatusGet
> mfcg, MultimodeFsmConfigGet
> mfcs, MultimodeFsmConfigSet
> mfsg, MultimodeFsmStatusGet
> nsecg, NotificationScriptExecuteConfigGet
> nsecs, NotificationScriptExecuteConfigSet
> pm15meet, PM_15MinElapsedExtTrigger
> pmbms, PM_BurninModeSet
> pmcc15mg, PM_ChannelCounters15MinGet
> pmcc1dg, PM_ChannelCounters1DayGet
> pmccsg, PM_ChannelCountersShowtimeGet
> pmcctg, PM_ChannelCountersTotalGet
> pmchs15mg, PM_ChannelHistoryStats15MinGet
> pmchs1dg, PM_ChannelHistoryStats1DayGet
> pmct15mg, PM_ChannelThresholds15MinGet
> pmct15ms, PM_ChannelThresholds15MinSet
> pmct1dg, PM_ChannelThresholds1DayGet
> pmct1ds, PM_ChannelThresholds1DaySet
> pmcg, PM_ConfigGet
> pmcs, PM_ConfigSet
> pmdpc15mg, PM_DataPathCounters15MinGet
> pmdpc1dg, PM_DataPathCounters1DayGet
> pmdpcsg, PM_DataPathCountersShowtimeGet
> pmdpctg, PM_DataPathCountersTotalGet
> pmdpfc15mg, PM_DataPathFailureCounters15MinGet
> pmdpfc1dg, PM_DataPathFailureCounters1DayGet
> pmdpfcsg, PM_DataPathFailureCountersShowtimeGet
> pmdpfctg, PM_DataPathFailureCountersTotalGet
> pmdpfhs15mg, PM_DataPathFailureHistoryStats15MinGet
> pmdpfhs1dg, PM_DataPathFailureHistoryStats1DayGet
> pmdphs15mg, PM_DataPathHistoryStats15MinGet
> pmdphs1dg, PM_DataPathHistoryStats1DayGet
> pmdpt15mg, PM_DataPathThresholds15MinGet
> pmdpt15ms, PM_DataPathThresholds15MinSet
> pmdpt1dg, PM_DataPathThresholds1DayGet
> pmdpt1ds, PM_DataPathThresholds1DaySet
> pmetr, PM_ElapsedTimeReset
> pmlesc15mg, PM_LineEventShowtimeCounters15MinGet
> pmlesc1dg, PM_LineEventShowtimeCounters1DayGet
> pmlescsg, PM_LineEventShowtimeCountersShowtimeGet
> pmlesctg, PM_LineEventShowtimeCountersTotalGet
> pmleshs15mg, PM_LineEventShowtimeHistoryStats15MinGet
> pmleshs1dg, PM_LineEventShowtimeHistoryStats1DayGet
> pmlfc15mg, PM_LineFailureCounters15MinGet
> pmlfc1dg, PM_LineFailureCounters1DayGet
> pmlfcsg, PM_LineFailureCountersShowtimeGet
> pmlfctg, PM_LineFailureCountersTotalGet
> pmlfhs15mg, PM_LineFailureHistoryStats15MinGet
> pmlfhs1dg, PM_LineFailureHistoryStats1DayGet
> pmlic15mg, PM_LineInitCounters15MinGet
> pmlic1dg, PM_LineInitCounters1DayGet
> pmlicsg, PM_LineInitCountersShowtimeGet
> pmlictg, PM_LineInitCountersTotalGet
> pmlihs15mg, PM_LineInitHistoryStats15MinGet
> pmlihs1dg, PM_LineInitHistoryStats1DayGet
> pmlit15mg, PM_LineInitThresholds15MinGet
> pmlit15ms, PM_LineInitThresholds15MinSet
> pmlit1dg, PM_LineInitThresholds1DayGet
> pmlit1ds, PM_LineInitThresholds1DaySet
> pmlsc15mg, PM_LineSecCounters15MinGet
> pmlsc1dg, PM_LineSecCounters1DayGet
> pmlscsg, PM_LineSecCountersShowtimeGet
> pmlsctg, PM_LineSecCountersTotalGet
> pmlshs15mg, PM_LineSecHistoryStats15MinGet
> pmlshs1dg, PM_LineSecHistoryStats1DayGet
> pmlst15mg, PM_LineSecThresholds15MinGet
> pmlst15ms, PM_LineSecThresholds15MinSet
> pmlst1dg, PM_LineSecThresholds1DayGet
> pmlst1ds, PM_LineSecThresholds1DaySet
> pmrtc15mg, PM_ReTxCounters15MinGet
> pmrtc1dg, PM_ReTxCounters1DayGet
> pmrtcsg, PM_ReTxCountersShowtimeGet
> pmrtctg, PM_ReTxCountersTotalGet
> pmrths15mg, PM_ReTxHistoryStats15MinGet
> pmrths1dg, PM_ReTxHistoryStats1DayGet
> pmrtt15mg, PM_ReTxThresholds15MinGet
> pmrtt15ms, PM_ReTxThresholds15MinSet
> pmrtt1dg, PM_ReTxThresholds1DayGet
> pmrtt1ds, PM_ReTxThresholds1DaySet
> pmr, PM_Reset
> pmsmg, PM_SyncModeGet
> pmsms, PM_SyncModeSet
> ptsg, PilotTonesStatusGet
> quit, Quit
> rccg, RebootCriteriaConfigGet
> rccs, RebootCriteriaConfigSet
> rusg, ResourceUsageStatisticsGet
> se, ScriptExecute
> sicg, SystemInterfaceConfigGet
> sics, SystemInterfaceConfigSet
> sisg, SystemInterfaceStatusGet
> tmcs, TestModeControlSet
> tmsg, TestModeStatusGet
> vig, VersionInformationGet
can i tweak snr?
can i switch to path 0 and disable g.inp and interleaving?
can i set a max rate for the connection?(like xdslcmd configure --maxrate)
what else can i do with the utility? i cant find documentation for it.
i want to improve my line quality with these, i tried lots of unsupported routers and the cli is locked or limited so i started to consider a openwrt/lede modded vdsl router.
if anyone has a supported vdsl openwrt modded router/modem (maybe Netgear Dm200 or TP-link TD-W8970 or something else), it would be great to post all the xdsl options from the cli and gui with explanation.
thanks